Summary
The vacuum permeability method provides a new approach to assessment of permeability in the near-field of rock excavations. The method, which resembles leak testing of vacuum lines, is based on the measurement and interpretation of the pneumatic response to evacuation of a rock mass. As the induced drainage area is in order of meters, the method is particularly suitable on the scale of the excavation damaged zone. The data can be evaluated either analytically or numerically. The evaluation is similar to the approach used in the analysis of drill stem tests in gas wells. Experiments on large scale laboratory models corroborated the validity of the method and the evaluation procedure. Field tests were conducted at a wide range of geomechanical conditions. The collected data indicate that there are three characteristic types of permeability distribution in the excavation damaged zone.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Franz, T., Klein, R., Jakubick, A. T. (1990): Assessment of the excavation damage in Room 209 on the 240 m level at the Underground Research Laboratory using the vacuum permeability technique. Ontario Hydro, Research Report No. 90-171, Toronto.
Horner, R. D. (1951): Pressure build-up in wells. In: Brill, E. J. (ed.) Proc., Third World Petroleum Congress, Section II, Leiden, Holland.
Jakubick, A. T. (1983): Permeability monitoring of the near-field of underground openings. Ontario Hydro, Research Report No. 83-520-K, Toronto.
Jakubick, A. T. (1984): Vacuum logging of the integrity of the near-excavation zone. In: Field measurements in geomechanics. Proc., International Symposium, Zurich.
Jakubick, A. T., Franz, T. (1992): Vacuum testing of the permeability of the excavation damaged zone: assessment of hydrogen leakage from an underground repository. In: Proc., OECD/NEA Workshop on Gas Generation and Release from Radioactive Waste Repositories, OECD, Paris.
Jakubick, A. T., Klein, R. (1987): Multiparameter testing of permeability by the transient vacuum technique. In: Tsang, C. F. (ed.) Coupled processes associated with nuclear waste repositories. Academic Press, London.
Jakubick, A. T., Klein, R. (1990): Permeability assessment in cavern TK-102C of underground oil storage facility in Kushikino, Japan. Ontario Hydro, Research Report No. 90-158-P, Toronto.
Jakubick, A. T., Klein, R., Gray, M. N., Keil, L. D. (1989): Characteristics of the excavation response zone as applied to shaft sealing. In: Excavation response in geological repositories for radioactive waste. Proc., NEA Workshop, OECD, Paris.
Klinkenberg, L. J. (1941): The permeability of porous media to liquids and gases. Drilling and Production Practice, American Petroleum Institute Report No. 200, Wahington D. C.
Long, J. C. S. (1985): Verification and characterization of continuous behaviour of fractured rock at AECL Underground Research Laboratory. Lawrence Berkeley Laboratory Report No. LBL-14975 Berkeley, California.
McKay, D. A. (1979): In situ stress measurements at Darlington GS. Ontario Hydro, Research Report No. 79-47-K, Toronto.
Montazar, P. M., Hustrulid, W. A. (1983): An investigation of fracture permeability in metamorphic rock around an underground opening. Office of Crystalline Repository Development (OCRD) Report No. BMI/OCRD-4(5) Battelle Memorial Institute, Columbus, Ohio.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jakubick, A.T., Franz, T. Vacuum testing of the permeability of the excavation damaged zone. Rock Mech Rock Engng 26, 165–182 (1993). https://doi.org/10.1007/BF01023621
Issue Date:
DOI: https://doi.org/10.1007/BF01023621