Skip to main content
Log in

Base drag effects on maximum lift-to-drag ratio airfoils at moderate supersonic speeds

  • Contributed Papers
  • Published:
Journal of Optimization Theory and Applications Aims and scope Submit manuscript

Abstract

Maximum lift-to-drag ratio airfoils at moderate supersonic speeds are determined using Ackeret's linear theory for the forebody pressure coefficient and Chapman's experimental results for the base pressure coefficient. Two cases are investigated for both laminar flow and turbulent flow: (i) given length and thickness and (ii) given length and enclosed area.

For case (i), it is shown that the maximum lift-to-drag ratio airfoil is identical with the minimum drag airfoil. Furthermore, for turbulent flow and given Mach number and Reynolds number, two critical values of the thickness ratio exist, τ1 and τ2. For τ≤τ1, the optimum airfoil is a diamond shape with a closed trailing edge and exhibits maximum thickness at midchord; for τ1≤τ≤τ2, the optimum airfoil is a diamond shape with a blunt trailing edge and exhibits maximum thickness between midchord and the trailing edge; finally, for τ≥τ2, the optimum airfoil is a wedge and exhibits maximum thickness at the trailing edge.

For case (ii), it is shown that the maximum lift-to-drag ratio is identical with the minimum drag airfoil. Furthermore, for turbulent flow and given Mach number and Reynolds number, a critical value (A/l 2)1 of the enclosed area ratio exists. ForA/l 2≤(A/l 2)1, the optimum airfoil is biconvex with a closed trailing edge and exhibits maximum thickness at midchord; forA/l 2≥(A/l 2)1, the optimum airfoil is biconvex with a blunt trailing edge and exhibits maximum thickness between midchord and the trailing edge.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Pritchard, R.E.,Optimum Airfoils at Moderate Supersonic Speeds, Part 6, Base Drag Effects on the Maximum Lift-to-Drag Ratio for Given Thickness, Rice University, Aero-Astronautics Report No. 46, 1968.

  2. Pritchard, R.E.,Optimum Airfoils at Moderate Supersonic Speeds, Part 7, Base Drag Effects on the Maximum Lift-to-Drag Ratio for Given Enclosed Area, Rice University, Aero-Astronautics Report No. 47, 1968.

  3. Miele, A., andDamoulakis, J.N.,Maximum Lift-to-Drag Ratio Airfoils at Moderate Supersonic Speeds, AIAA Journal (in publication).

  4. Chapman, D.R., Wimbrow, W.R., andKester, R.H.,Experimental Investigation of Base Pressure on Blunt-Trailing-Edge Wings at Supersonic Velocities, NACA, TN No. 2611, 1952.

  5. Miele, A., Editor,Theory of Optimum Aerodynamic Shapes, Academic Press, New York, 1965.

    Google Scholar 

  6. Miele, A.,On the Minimization of the Product of the Powers of Several Integrals, Journal of Optimization Theory and Applications, Vol. 1, No. 1, 1967.

  7. Pritchard, R.E.,Optimum Airfoils at Moderate Supersonic Speeds, Part 5, Minimum Drag, Including Base Drag, Rice University, Aero-Astronautics Report No. 45, 1968.

  8. Chapman, D.R.,Airfoil Profiles for Minimum Pressure Drag at Supersonic Velocities—General Analysis with Application to Linearized Supersonic Flow, NACA, Report No. 1063, 1952.

  9. Chapman, D.R.,Airfoil Profiles for Minimum Pressure Drag at Supersonic Velocities—Application of Shock-Expansion Theory, Including Consideration of Hypersonic Range, NACA, TN No. 2787, 1952.

Download references

Author information

Authors and Affiliations

Authors

Additional information

Communicated by A. Miele

This research, supported by the Office of Scientific Research, Office of Aerospace Research, United States Air Force, Grant No. AF-AFOSR-828-67, is a condensed version of the investigations described in Refs. 1–2. The author would like to thank Dr. Angelo Miele for suggesting the problem and helpful discussions.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Pritchard, R.E. Base drag effects on maximum lift-to-drag ratio airfoils at moderate supersonic speeds. J Optim Theory Appl 3, 115–136 (1969). https://doi.org/10.1007/BF00932462

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF00932462

Keywords

Navigation