Abstract
The theoretical basis of the nondestructive determination of the modulus of elasticity and tensile strength of oriented glass-reinforced plastics in the direction of the principal axes of anisotropy from the resin content and porosity of the finished product is examined. The results of an experimental verification are presented.
Similar content being viewed by others
Literature cited
M. Z. Medvedev, L. P. Bobrikov, and A. G. Kalnach, Mekhan. Polim., No. 6, 972 (1966).
L. P. Bobrikov and M. Z. Medvedev, Mekhan. Polim., No. 3, 547 (1968).
M. Z. Medvedev, L. P. Bobrikov, and A. G. Kalnach, Mekhan. Polim., No. 3, 557 (1967).
G. A. Van Fo Fy and G. N. Savin, Mekhan. Polim., No. 1, 151 (1965).
A. L. Rabinovich, Author's abstract of doctoral dissertation, Moscow (1965).
A. M. Skudra, Doctoral dissertation, Riga (1967).
Yu. M. Tarnopol'skii and A. M. Skudra, Structural Strength and Deformation of Glass-Reinforced Plastics [in Russian], Riga (1966).
R. Hashin and B. Rosen, J. Appl. Mech. Ser. E, Trans. ASME,31, No. 2 (1964).
R. Hill, Mekhanika, No. 5, 127 (1964).
S. V. Serensen and G. P. Zaitsev, Mekhan. Polim., No. 2, 93 (1965).
H. T. Corten, Mechanics of Failure of Reinforced Plastics [Russian translation], Moscow (1967).
N. G. Egorov and S. L. Roginskii, Plast. Massy, No. 7, 49 (1965).
V. B. Tikhomirov and V. E. Gusev, Tekst. Prom., No. 4, 39 (1965).
P. I. Zubov, L. A. Sukhareva, M. R. Kiselev, and L. E. Kalinina, Mekhan. Polim., No. 6, 808 (1966).
E. I. Stepanychev, Mekhan. Polim., No. 3, 469 (1966).
V. S. Gumenyuk, V. V. Lushchik, and S. V. Urbanskii, Mekhan. Polim., No. 1, 99 (1967).
Soviet Standard GOST 4649-55.
Soviet Standard GOST 4648-56.
Soviet Standard GOST 9550-60.
Additional information
Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, Vol. 5, No. 2, pp. 332–341, March–April, 1969.
Rights and permissions
About this article
Cite this article
Medvedev, M.Z., Bobrikov, L.P. Calculation of the moduli of elasticity and tensile strength of oriented glass-reinforced plastics on the basis of a nondestructive determination of their composition and structural parameters. Polymer Mechanics 5, 273–280 (1969). https://doi.org/10.1007/BF00854769
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00854769