Summary
An analysis of experimental data on the relationship between the density and thickness of strips rolled from iron, nickel, aluminum, titanium, and stainlesssteel powders in rolling mills with different roller diameters was performed. It was shown that the dependence of the density on the thickness of strips is determined by the method used for varying the strip thickness.
It was found that the density of strips heavily depends on the strip width. A method for calculating the density of rolled strips which takes into account all the geometric and physicomechanical parameters of the process and which yields results that are in good agreement with experimental data was proposed.
Similar content being viewed by others
Literature cited
G. A. Vinogradov and Yu. N. Semenov, Rolling of Metal Powders [in Russian], Metallurgizdat, Moscow (1960).
A. N. Nikolaev, “Steel strips produced by using the method of powder rolling,” Trudy GPI,14, No. 2 (1958).
A. N. Nikolaev, “Force applied to the rollers and the trapping angle in rolling iron powder,” Trudy GPI,14, No. 2 (1958).
G. I. Aksenov, V. G. Khromov, A. N. Nikolaev, and Yu. N. Semenov, “Rolling of titanium powder into thin strips according to the GPI method.” Titanium and Its Alloys [in Russian], Izd. AN SSSR, No. 3 (1960).
G. Naeser and F. Zirm, Stahl u. Eisen, No. 22, 70 (1950).
G. A. Vinogradov and I. M. Fedorchenko, Poroshkovaya Metallurgiya, No. 1, 61 (1961).
D. Worna and R. Perks, Powder Metallurgy, No. 3, London (1959).
I. M. Pavlov, Theory of Rolling [in Russian], Metallurgizdat, Moscow (1950).
G. I. Aksenov, “Rolling of strips from metal powders,” Trudy VNITOM (1954).
P. Evans and G. Smith, Powder Metallurgy, No. 3, London (1959).
G. A. Vinogradov and L. I. Komarova, Poroshkovaya Metallurgiya, No. 1, 27 (1962).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Vinogradov, G.A. Application of the method of reference points for calculating the density of strips rolled from powders. Powder Metall Met Ceram 1, 275–282 (1962). https://doi.org/10.1007/BF00774434
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00774434