Abstract
In this paper, we describe the structural health monitoring of several structures, with different geometry, materials and behaviors, using optical fiber sensors. Those studies aimed to demonstrate the feasibility of such technologies in structural health monitoring, with all the advantages inherent to the optical fiber technology.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
P. Antunes, H. Lima, N. Alberto, L. Bilro, P. Pinto, A. Costa, et al., “Optical sensors based on fiber Bragg gratings for structural health monitoring,” in New Developments in Sensing Technology for Structural Health Monitoring. S. C. Mukhopadhyay Ed. Heidelberg: Springer-Verlag, 2011, pp. 253–295.
P. Antunes, H. Lima, J. Monteiro, and P. S. André, “Elastic constant measurement for standard and photosensitive single mode optical fibers,” Microwave and Optical Technology Letters, vol. 50, no. 9, pp. 2467–2469, 2008.
P. C. Chang, A. Flatau, and S. C. Liu, “Review paper: health monitoring of civil infrastructure,” Structural Health Monitoring, vol. 2, no. 3, pp. 257–267, 2003.
A. D. Grosso, K. Bergmeister, D. Inaudi, and U. Santa, “Monitoring of bridges and concrete structures with fiber optic sensors in Europe,” in International Association for Bridge and Structural Engineering (IABSE) Conference, Seoul, Korea, August, pp. 15–22, 2001.
J. M. Ko and Y. Q. Ni, “Technology developments in structural health monitoring of large-scale bridges,” Engineering Structures, vol. 27, no. 12, pp. 1715–1725, 2005.
C. Williamson and L. Fixter, “State of the art review: structural health monitoring,” QinetiQ, QinetiQ/S&DU/T&P/E&M/TR0601122, 2006.
D. Adams, Health monitoring of structural materials and components: methods with applications. Chichester: John Wiley & Sons Inc., 2007.
H. Wenzel and P. Furtner, “SHM at the civil infrastructure: applications, recent progress and future demands,” 2010 (available from: http://www.brimos.com/Brimos/HTML/FRAMESET/Frameset_Downloads.htm).
P. F. C. Antunes, H. F. T. Lima, N. J. Alberto, H. Rodrigues, P. M. F. Pinto, J. L. Pinto, et al., “Optical fiber accelerometer system for structural dynamic monitoring,” IEEE Sensors Journal, vol. 9, no. 11, pp. 1347–1354, 2009.
M. Majumder, T. K. Gangopadhyay, A. K. Chakraborty, K. Dasgupta, and D. K. Bhattacharya, “Fiber Bragg gratings in structural health monitoring-present status and applications,” Sensors and Actuators A: Physical, vol. 147, no. 1, pp. 150–164, 2008.
A. Othonos and K. Kalli, Fiber Bragg Gratings: fundamentals and applications in telecommunications and sensing. Boston: Artech House, 1999.
P. Antunes, F. Domingues, M. Granada, and P. André, “Mechanical properties of optical fibers,” in Selected Topics on Optical Fiber Technology. M. Yasin, S. Harun, and H. Arof Ed. Rijeka, Croatia: InTech, 2011 (available from: http://www.intechopen.com/books/selected-topics-on-optical-fiber-technology/mechanical-properties-ofoptical-fibers).
K. S. C. Kuang, S. T. Quek, C. G. Koh, W. J. Cantwell, and P. J. Scully, “Plastic optical fiber sensors for structural health monitoring: a review of recent progress,” Journal of Sensors, vol. 2009, pp. 312053-1–312053-13, 2009.
A. Vallan, M. L. Casalicchio, A. Penna, and G. Perrone, “An intensity based fiber accelerometer,” in 2012 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Graz, Austria, May 13–16, pp. 1078–1082, 2012.
P. Antunes, H. Lima, H. Varum, and P. André, “Optical fiber sensors for static and dynamic health monitoring of civil engineering infrastructures: Abode wall case study,” Measurement, vol. 45, no. 7, pp. 1695–1705, 2012.
A. Mita and I. Yokoi, “Fiber Bragg grating accelerometer for structural health monitoring,” presented at Fifth International Conference on Motion and Vibration Control (MOVIC 2000), Sydney, Australia, Dec. 4–8, 2000.
P. F. C. Antunes, C. A. Marques, H. Varum, and P. S. Andre, “Biaxial optical accelerometer and high-angle inclinometer with temperature and cross-axis insensitivity,” IEEE Sensors Journal, vol. 12, no. 7, pp. 2399–2406, 2012.
P. S. André, H. Varum, P. Antunes, L. Ferreira, and M. G. Sousa, “Monitoring of the concrete curing process using plastic optical fibers,” Measurement, vol. 45, no. 3, pp. 556–560, 2012.
H. C. Pereira, “Caracterização do comportamento estrutural de construções em adobe,” Civil engineering, Universidade de Aveiro, Aveiro, Portugal, MSc, 2008.
P. Antunes, H. Rodrigues, J. Melo, H. Varum, and P. André, “Dynamic monitoring of an elevated water reservoir with an optical biaxial accelerometer,” presented at OSA Sensors 2012, Monterey, USA, Jun. 24–28, 2012.
P. Antunes, R. Travanca, H. Varum, and P. André, “Dynamic monitoring and numerical modelling of communication towers with FBG based accelerometers,” Journal of Constructional Steel Research, vol. 74, pp. 58–62, 2012.
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is published with open access at Springerlink.com
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License (https://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Antunes, P., Rodrigues, H., Travanca, R. et al. Structural health monitoring of different geometry structures with optical fiber sensors. Photonic Sens 2, 357–365 (2012). https://doi.org/10.1007/s13320-012-0094-z
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13320-012-0094-z