Abstract
The “black pad” phenomenon of Ni-P electroless plating has been one of the serious electronics failures in the market although this plating is known to be a useful barrier coating against oxidation. To understand the mechanism of this phenomenon, the weak interfaces of Ni-P plating soldered with leaded and lead-free solders have been analyzed with the aid of transmission-electron microscopy. Two causes of degradation are described in this paper. One is the initial degraded Ni-P plating covered with gold thin plating. In this case, the surface of the Ni-P plating was locally corroded to form a sparse amorphous oxide structure beneath the gold plating. The other is the extreme interface reaction between the Ni-P plating and solders. Based on the findings, it was concluded that the quality of the Au/Ni-P plating and the process conditions of soldering are to be carefully controlled.
Similar content being viewed by others
References
D.R. Frear and P.T. Vianco, Metall. Mater. Trans. A, 25A(7) (1994), pp. 1509–1523.
P.L. Liu and J.K. Shang, Metall. Mater. Trans. A, 31A(11) (2000), pp. 2867–2875.
C.E. Ho et al., J. Electron. Mater., 31(6) (2002), pp. 584–590.
J.W. Jang, P.G. Kim, and K.N. Tu, J. Appl. Phys., 85(12) (1999), pp. 8456–8463.
Y. Chonam et al., Mater. Trans. 43(8) (2002), pp. 1840–1846.
C.W. Hwang et al., J. Mater. Res., 18(11) (2003), pp. 2540–2543.
C.W. Hwang et al., J.Electron.Mater. 33(10) (2004), pp. 1200–1209.
C.E. Ho et al., J. Electron. Mater. 35(5) (2006), pp. 1017–1024.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Suganuma, K., Kim, KS. The root causes of the “Black pad” phenomenon and avoidance tactics. JOM 60, 61–65 (2008). https://doi.org/10.1007/s11837-008-0074-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-008-0074-3