Accurate Computation of Electric Field Enhancement Factors for Metallic Nanoparticles Using the Discrete Dipole Approximation
- First Online:
- Cite this article as:
- DePrince, A.E. & Hinde, R.J. Nanoscale Res Lett (2010) 5: 592. doi:10.1007/s11671-009-9511-7
- 2.7k Downloads
We model the response of nanoscale Ag prolate spheroids to an external uniform static electric field using simulations based on the discrete dipole approximation, in which the spheroid is represented as a collection of polarizable subunits. We compare the results of simulations that employ subunit polarizabilities derived from the Clausius–Mossotti relation with those of simulations that employ polarizabilities that include a local environmental correction for subunits near the spheroid’s surface [Rahmani et al. Opt Lett 27: 2118 (2002)]. The simulations that employ corrected polarizabilities give predictions in very good agreement with exact results obtained by solving Laplace’s equation. In contrast, simulations that employ uncorrected Clausius–Mossotti polarizabilities substantially underestimate the extent of the electric field “hot spot” near the spheroid’s sharp tip, and give predictions for the field enhancement factor near the tip that are 30 to 50% too small.
KeywordsMetallic nanoparticlesOptical propertiesSimulation
The electrical and optical properties of noble metal nanoparticles have attracted considerable scientific interest for many decades. Over a century ago, for example, Mie —building on even earlier work by Lorenz  and possibly others—attributed the colors of colloidal suspensions of Au nanoparticles  to the nanoparticles’ visible-wavelength optical scattering properties. Interest in the optical properties of noble metal nanoparticles has risen dramatically in recent years with the recognition that these properties, if understood in sufficient detail, can be harnessed to create nanoscale photonic devices and sensors.
The discrete dipole approximation [4, 5] (also called the coupled dipole approximation) is one of several numerical methods that have been developed to simulate the response of a small particle to an incident electromagnetic (EM) field. In simulations based on the discrete dipole approximation (DDA), a nanoparticle is modeled as a regular (typically cubic) lattice of polarizable subunits. The incident EM field induces dipole moments in each subunit; these dipole moments in turn generate local fields that further polarize nearby subunits. Once the subunits’ induced dipole moments are mutually self-consistent, the electromagnetic and optical properties of the dipole lattice are taken to mimic those of the real nanoparticle. The assumption that only dipolar interactions among subunits and between the subunits and the external field need be considered, an assumption that is implicit in DDA-based simulations, is generally thought to be a reasonable one provided that the subunits are small enough so that the electric field is nearly constant across an individual subunit; this assumption is frequently tested by comparing the results obtained from simulations at two or more levels of discretization.
where ρ is the number density of the polarizable subunits and ε is the nanoparticle’s dielectric constant; this relation is exact for an infinite cubic lattice of subunits in a zero-frequency external electric field . For finite (nonzero) frequency external EM fields, a radiative reaction  correction to the zero-frequency polarizability tensor defined by Eq. 1 ensures that the optical theorem holds for the dipole lattice . Other finite frequency corrections to the static polarizability given by Eq. 1 can be derived from an analysis of the dispersion relation for electromagnetic waves propagating along a lattice of polarizable points .
Real nanoparticles, of course, have surfaces, and hence cannot be represented as infinite lattices; consequently, the use of polarizabilities defined by Eq. 1 in DDA-based simulations of nanoparticles represents an additional approximation , one which persists even when the subunits are very small, which is not remediated by radiative reaction corrections or other finite frequency corrections, and which seems to be especially severe for materials whose dielectric constant has a large imaginary component . Recent work [9, 10] suggests that the use of subunit polarizabilities that properly account for the anisotropic local environment of DDA subunits near surfaces can increase substantially the accuracy with which highly averaged far-field quantities, such as absorption and scattering cross-sections, can be computed using DDA-based methods. In this letter, we employ these corrected polarizabilities in DDA-based simulations of nanoscale Ag prolate spheroids in homogeneous static electric fields; we find that the new polarizabilities, which include a local environmental correction (LEC) to the CM polarizabilities, also substantially improve the description of spatially resolved near-field quantities, such as localized electric field enhancement factors, computed in these simulations.
where ε0 is the absolute permittivity of free space.
The quantity in square brackets in this equation is the on-axis electric field enhancement factor, which we henceforth denote as F. It has the value Ftip = (1 + s)/[1 + sLz(0)] at the spheroid’s tip (x, y, z) = (0, 0, c), and approaches F = 1 as z → ∞. Large Ftip values can be achieved when the quantity 1 + sLz (0), which is controlled by the spheroid’s aspect ratio c/a and dielectric constant, is small in magnitude.
We now turn to our DDA-based simulations. The technical aspects of these simulations have been extensively reviewed [5, 13]; we therefore report only those computational details that are specific to the simulations presented here. We model a spheroid as a collection of N contiguous cubic subunits, with edges of length d, centered at the positions (xyz) = (nxdnydnzd); here, (nxnynz) is an integer triple that satisfies where nmax is an integer that determines the discretization level of the spheroid. The edge length d is chosen so that the volume enclosed by the collection of cubic subunits is equal to the spheroid volume. The linear algebraic equations that determine the dipole moments mj of the individual subunits (here j is an index that distinguishes individual subunits) are solved using the complex-arithmetic implementation of the gmres algorithm described by Frayssé et al. ; we terminate the algorithm and record the dipole moments mj once the normwise backward error drops below 10−6. We obtain the wavelength-dependent dielectric function of Ag via linear interpolation of the data points compiled by Lynch and Hunter ; as our main goal in the present work is not to provide results for comparison with experiment, but to compare the accuracy of the results obtained in simulations with and without the local environmental correction to the polarizabilities, we neglect finite-size corrections to the dielectric constant that arise from electronic scattering from the spheroid surface . Henceforth, we set εm = 1 (corresponding to vacuum as the medium surrounding the spheroid) and E0 = 1 au; all of the results we report are scaled by 1/E0, so the numerical value of E0 is ultimately irrelevant.
First, we examine the polarization P induced in a metallic nanoparticle by a uniform static external electric field. We consider a prolate spheroid with a = 10 nm, c = 40 nm, and dielectric constant ε = 12.26 + 0.84i (corresponding to an excitation wavelength of λ ≈ 570 nm). For this aspect ratio and dielectric constant, the quantity 1 + sLz (0) is purely imaginary and small in magnitude: 1 + sLz (0) ≈ 0.0633i. We use the DDA to simulate this spheroid at several levels of discretization, ranging from N = 6041 subunits (d = 1.405 nm) to N = 24679 subunits (d = 0.879 nm). We divide the dipole moment mj of each subunit by the subunit volume d3 to obtain the polarization Pj for each subunit; we then divide the magnitude of this vector by the magnitude of the exact polarization vector defined in Eq. 7 to obtain a dimensionless relative polarizationfor each subunit. This quantity has the valuewhen the magnitude of a subunit’s dipole moment mj is consistent with the exact uniform polarization given by Eq. 7.
To gain more insight into the relative performance of DDA-based simulations employing CM and LEC polarizabilities, we use the simulations to compute the electric field enhancement factor in the vicinity of the spheroid’s sharp tip, and compare these enhancement factors to reference results obtained by numerically differentiating the exact electrical potential Φout defined in Eq. 3. To partially mitigate the discretization effects that are inherent in DDA-based simulations, we rotationally average the field enhancement factor obtained from these simulations by computing it on ten evenly spaced dihedral planes containing the space-fixed z axis and then averaging the enhancement factors obtained for each dihedral plane.
In summary, we have modeled the response of a nanoscale Ag prolate spheroid to an external electric field using DDA-based simulations that employ subunit polarizabilities that either include or omit a local environmental correction. We invoke the electrostatic approximation, in which the incident field is assumed to be spatially uniform and static, but the spheroid’s dielectric constants is taken from the wavelength-dependent dielectric function of bulk Ag; this allows us to compare the predictions of the DDA-based simulations to exact results obtained by solving Laplace’s equation for prolate spheroids in a uniform static external field. We have chosen a dielectric constant for the spheroid that maximizes the electric field enhancement factor at the spheroid’s sharp tip. The predictions of DDA-based simulations that employ LEC polarizabilities are much closer to the exact results than are those of DDA-based simulations that employ CM polarizabilities; simulations using CM polarizabilities yield a near-field hot spot that is too small and field enhancement factors that are too low. We therefore conclude that DDA-based simulations of metallic nanoparticles that employ uncorrected CM polarizabilities may give inaccurate predictions of the particle’s spatially resolved near-field properties, even at locations some distance away from the particle’s surface.
This work was supported by grants from the University of Tennessee Honors Program (A.E.D.) and the US Department of Energy (R.J.H.). R.J.H. thanks L. Blocker, L. Dixon, and E. Read (University of Tennessee Libraries) for bibliographic assistance.
This article is distributed under the terms of the Creative Commons Attribution Noncommercial License which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.