Nanostructured Biomaterials with Controlled Properties Synthesis and Characterization
- First Online:
- Cite this article as:
- Teodor, E., Liţescu, S., Petcu, C. et al. Nanoscale Res Lett (2009) 4: 544. doi:10.1007/s11671-009-9278-x
- 2.1k Views
Magnetic nanoparticles were obtained using an adjusted Massart method and were covered in a layer-by-layer technique with hydrogel-type biocompatible shells, from chitosan and hyaluronic acid. The synthesized nanocomposites were characterized using dynamic light scattering, transmission electron microscopy, and Fourier transformed infrared spectroscopy. Biocompatibility of magnetic nanostructures was determined by MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) cell proliferation assay, swelling tests, and degradation tests. In addition, interaction of hydrogel-magnetic nanoparticles with microorganisms was studied. The possibility of precise nanoparticles size control, as long as the availability of bio-compatible covering, makes them suitable for biomedical applications.
KeywordsMagnetic nanoparticlesHydrogelsLayer-by-layer techniqueBiocompatibility
The association of magnetic nanoparticles with hydrogel type biopolymeric shells confers to composite material bio-compatibility and the capacity to retain and deliver bioactive substances. This is supported by the fact that hydrogel-magnetic nanoparticles could be controlled by a magnetic field in order to facilitate their penetration in target tissues. It is possible to obtain in this way “smart” nanostructured biomaterials, which could support different biotechnological and biomedical applications. Moreover, it should be underlined that by this way the main goal of nanoparticles employment is attained in therapeutics, namely to improve drug solubility and bioavailability , due to the fact that there is a need to develop suitable drug delivery systems that distribute the bioactive molecule only to the site of action, without affecting healthy organs and tissues .
The main aim of the present work was to synthesize magnetic nanoparticles (NP), with enhanced biocompatibility obtained by hydrogel biomaterial covering of nanoparticles, which preserve the nanometric dimensions, and moreover are nontoxic and noninteractive with pathogen bacteria. The developed nanocomposite material could be used for medical or biotechnological purposes.
Materials and Methods
Water-dispersible magnetic nanoparticles (MP) were obtained according to previous studies, using an adjusted Massart method . Briefly, the magnetic nanoparticles were precipitated from an aqueous mixture of Fe2+ and Fe3+ salts (1:2 molar ratio), and treated with NH4OH at 75 °C. Subsequent to precipitation the magnetic nanoparticles were encapsulated in bio-polymer shells.
Two different biopolymeric materials were tested, namely chitosan (Chit) from crab shells (Sigma) and hyaluronic acid (HA) (extract from bovine vitreous, own extraction method) . Two covering procedures were performed, namely (i) layer-by-layer coating—using 2% chitosan solution and 1% hyaluronic acid solution—and (ii) hybrid polymer coating. The hybrid polymer consisted of Chit–HA hydrogels obtained by physical mixing of 2% chitosan solution and 1% HA solution. Different ratios of chitosan solution and hyaluronic acid solution were employed in covering magnetic nanoparticles. Size distribution and characterization of bare and encapsulated magnetic nanoparticles were acquired using dynamic light scattering (DLS) technique, at room temperature using Malvern instrument (Nicomp 270, laser source, λ 632.8 nm) operating in the range 1 nm–1 μm.
The morphology of the particles was investigated with transmission electron microscopy (TEM) and confocal microscopy, using a Philips EM 208, and a confocal spectral laser scanning microscope (LEICA TCS SP).
The structure of hydrogel coated magnetic nanoparticles was characterized by Fourier transform infrared spectroscopy (FT-IR) technique using a Bruker Tensor 27 device.
The swelling tests and degradation tests were performed, for both bare and covered nanoparticles.
where %S is swelling ratio, mw is the weight of samples after swelling test performing (buffer immersion), and mi is initial weight.
where %D represent degradation ratio, m0 is the original weight after equilibration time of swelling in PBS, and mt is the weight at time t.
Cytotoxicity of nanostructures was determined by MTT cell proliferation assay , a quantitative, convenient method to evaluate a cell population’s response to external factors. The key component is (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide) or MTT. Mitochondrial dehydrogenases of viable cells cleave the tetrazolium ring, yielding purple formazan crystals which are insoluble in aqueous solutions. The resulting purple solution is spectrophotometrically measured. An increase or decrease in cell number results in a concomitant change in the amount of formazan produced, indicating the degree of cytotoxicity caused by the test material.
MTT test was done on Vero cells (kidney epithelial cells from African green monkey). These were seeded into 24-well plates at a density of 5 × 104cells/well and were cultured for 24 h in Dulbecco’s modified Eagles medium/10% FBS (DMEM). After 24 h, the medium was replaced with different samples obtained from hydrogel-magnetic nanoparticles (conc. 2–12 ng/cell).
After 2 days exposure of cells to nanoparticles the cells were washed with phosphate buffer and 500 μL MTT solution (0.5 mg/mL) was added in each well. The cells were incubated for 3 h at 37 °C and the formazan crystals formed in living cells were solubilized in isopropanol. The absorbance was measured at 570 nm with a Jasco UV–Vis spectrometer. The viability of the treated cultures was expressed as a percentage of the control, untreated cells.
The study of hydrogel-magnetic nanoparticles interactions with microorganisms was performed on Gram-positive (methicillin resistant Staphylococcus aureusListeria monocytogenes), Gram-negative bacteria (Escherichia coliSalmonella enteritidisPseudomonas aeruginosa), and yeast (Candida albicans). The testing of the antimicrobial and antifungal activity was investigated by a qualitative screening of the susceptibility spectrum of different microbial strains to the tested samples by adapted variants of the diffusion method .
Results and Discussion
Magnetic nanoparticles were obtained by co-precipitation of iron oxides. NP from solutions of iron II and III were covered with successive layers of different chitosan and hyaluronic acid ratios, both in a layer-by-layer (l-b-l) technique and in a hybrid polymer covering technique, resulting in different variants of hydrogel-magnetic nanoparticles.
Composition and characteristics of some synthesized hydrogel-magnetic nanoparticles
Diameter media (nm)
Zeta potential (mV)
Dispersion of magnetic nanoparticles (MP)
20 mL MP + 10 mL 2% Chit
+10 mL 1% HA
+10 mL 2% Chit
20 mL MP + 1.5 mL 2% Chit
+5 mL 1% HA
+1.5 mL 2% Chit + INH
20 mL MP + 3 mL [mixed 1% HA and 2% Chit; 1:3 (v:v)]
20 mL MP + 3 mL 2% Chit
+3 mL 1% HA
+3 mL 2% Chit
20 mL MP + 1 mL 2% Chit
Size and Size Distribution of Covered NP
The hydrogel-magnetic nanoparticles were characterized by DLS and zetametry to determine the size, size distribution, and zeta potential (Table 1). As could be noticed from the values of the particles sizes (in swelled stage), the layer-by-layer covering technique with three successive layers of Chit/HA/Chit seemed to provide the most suitable nanoparticles dimensions (180–264 nm), ensuring a degree of covering of the NP and a compact structure. The zeta potential values alternating from negative to positive values proved that the NP covering is efficient and, moreover, the final nanostructures obtained are stable, taking into account that the values are higher than 30 mV.
Nanoparticles covered with one, or two layers of polymer, and those covered with mixed polymers finally presented too large dimensions detected by DLS measurements (Table 1).
Further studies were done only with samples suitable for applications in bio-medical area (especially for delivery systems).
Morphology of Covered NP
Structural Analysis FTIR of Covered NP
With the argument of appropriate size, good covering, and suitable end groups being able to bind an active principle, several tests of biocompatibility were performed on the obtained nanostructures, the first step being that of swelling behavior.
The study of the interaction of nanostructures with microorganisms (Gram-positive, Gram-negative bacteria and yeasts) was performed afterward. Using three different variants to determine the microbial behavior in 24 h, the same conclusion was drawn, namely the NPs and nanostructures do not stimulate the growth of microorganisms (data not shown).
Interest in nanosized drug delivery systems based on magnetic nanoparticles has increased in the past few years. Recent studies describe an approach in the formation of a novel hydrogel nanocomposite with superparamagnetic property based on magnetic nanoparticles suspension mixed with different polymers and cyclic oligosaccharide . Novel magnetic hybrid hydrogels were fabricated by the in situ embedding of magnetic iron oxide nanoparticles into the porous hydrogel networks; this magnetic hydrogel material was found to hold a potential application in magnetically assisted bioseparation .
We obtained hydrogel-magnetic nanoparticles with a magnetic core (Fe3O4) encapsulated in layer-by-layer chitosan–hyaluronic acid hydrogel. The designed nanostructures were characterized, proving to be suitable to cellular wall penetration due to their dimensions  (between 180–264 nm in swelled stage, and between 40–90 nm in dried stage), spherical shape, homogenous distribution, and swelling capacity.
FT-IR spectroscopy analysis gave evidence about the magnetic NP encapsulation in biopolymeric layers, the specific wave numbers for carboxyl-, hydroxyl-, and amino-groups signals from chitosan and hyaluronic acid being registered.
Performed biocompatibility tests proved that the hydrogel-magnetic nanoparticles resulting from our experiments are biocompatible and relatively inert to microorganisms, so they are suitable to be used for loading and delivery of active compounds.
This work was financially supported by the National Research and Development Agency of Romania, the Program of Excellence in Research (No. 129/2006 RELANSIN CEEX).