Contact current modulators with a doubled frequency output
Rent the article at a discountRent now
* Final gross prices may vary according to local VAT.Get Access
It is shown that the advantage of contact modulators with an output at a doubled frequency is considerably lower zero shift and drift (time and temperature) and opens up the practical possibility of utilizing not only the nanovolt but also the picovolt ranges of amplified voltages. Two circuits for constructing such modulators are considered. A highly sensitive amplifier of the modulator-demodulator type is described with modulation at doubled frequency, and areas of its application are indicated.
- V. M. Shlyandin, Principles of Automation [in Russian], Gosenergoizdat, Moscow, Leningrad (1958).
- B. A. Kalinchuk and O. A. Pichugin, Small-Signal Modulators [in Russian], Energiya, Leningrad (1980).
- M. A. Rozenblat, Magnetic Components of Automation and Computer Technology [in Russian], Nauka, Moscow (1966).
- Yu. V. Afanasiev, Fluxgate Devices [in Russian], Energiya, Leningrad (1986).
- G. Musmann and Y. Afanassiev, Fluxgate Magnetometers for Space Research, Books on Demand GmbH, Norderstedt (2010).
- M. S. Roitman, “A system for obtaining two equal quadrature voltage vectors,” Izmer. Tekhn., No. 3, 40 (1962).
- P. B. Dub, V. A. Nichoga, and A. K. Zakharkin, “Local active low-threshold induction sensors in electroprospecting work using the ZSB and ZSMT methods,” Geofiz. Appar., No. 102, 28–34 (1999).
- Contact current modulators with a doubled frequency output
Volume 55, Issue 8 , pp 949-954
- Cover Date
- Print ISSN
- Online ISSN
- Springer US
- Additional Links
- contact modulator
- amplification of weak constant or slowly varying signals
- Industry Sectors