Selection of optimal parameters of the electronic probe of a scanning electron microscope in measurement of the geometric parameters of objects by means of a defocusing probe
Purchase on Springer.com
$39.95 / €34.95 / £29.95*
Rent the article at a discountRent now
* Final gross prices may vary according to local VAT.
Estimation of the procedural error of measurements of the geometric parameters of objects by a method involving defocusing of the electron probe of a scanning electron microscope is carried out. The procedural error is caused by the dependence of the results of measurements on the parameters of the probe. It is shown that this error may be reduced by selecting optimal parameters of the probe at which the actual measurement conditions correspond in the best way possible to the requirements of the computational model.
- David C. Joy, Monte Carlo Modeling for Electron Microscopy and Microanalysis, Oxford University Press, Oxford (1995).
- Ch. P. Volk et al., “Problems in the measurement of the geometric characteristics of the electron probe of a scanning electron microscope,” in: Linear Measurements in the Micrometric and Nanometric Ranges in Microelectronics and Nanotechnology: Proc. IOFAN [in Russian], Nauka, Moscow (2006), pp. 77–120.
- M. N. Fillipov et al., “SEM probe defocusing method of measurement of linear sizes of nanorelief elements,” Proc. SPIE, 7521, 7621161-9 (2010).
- M. A. Danilova et al., “A test object with a line width less than 10 nm for scanning electron microscopy,” Izmer. Tekhn., No. 8, 20–23 (2008); Measur. Techn., 51, No. 8, 839–843 (2008). CrossRef
- Yu. A. Novikov et al., “Test objects with right-angled and trapezoidal profiles of the relief elements,” Proc. SPIE, 7042, 704208-1–704208-12 (2008).
- Selection of optimal parameters of the electronic probe of a scanning electron microscope in measurement of the geometric parameters of objects by means of a defocusing probe
Volume 55, Issue 8 , pp 908-913
- Cover Date
- Print ISSN
- Online ISSN
- Springer US
- Additional Links
- scanning electron microscope
- defocusing method
- Industry Sectors
- Author Affiliations
- 1. Research Center for the Study of the Properties of Surfaces and Vacuum (NITsPV), Moscow, Russia
- 2. Prokhorov General Physics Institute, Russian Academy of Sciences (IOF RAN), Moscow, Russia
- 3. Kurnakov Institute of General and Inorganic Chemistry, Russian Academy of Sciences (IONKh RAN), Moscow, Russia