Abstract
Closed-form analytic solutions useful for the design of capillary flows in a variety of containers possessing interior corners were recently collected and reviewed. Low-g drop tower and aircraft experiments performed at NASA to date show excellent agreement between theory and experiment for perfectly wetting fluids. The analytical expressions are general in terms of contact angle, but do not account for variations in contact angle between the various surfaces within the system. Such conditions may be desirable for capillary containment or to compute the behavior of capillary corner flows in containers consisting of different materials with widely varying wetting characteristics. A simple coordinate rotation is employed to recast the governing system of equations for flows in containers with interior corners with differing contact angles on the faces of the corner. The result is that a large number of capillary driven corner flows may be predicted with only slightly modified geometric functions dependent on corner angle and the two (or more) contact angles of the system. A numerical solution is employed to verify the new problem formulation. The benchmarked computations support the use of the existing theoretical approach to geometries with variable wettability. Simple experiments may be performed to confirm the theoretical findings. Favorable agreement between such experiments and the present theory may argue well for the extension of the analytic results to predict fluid performance in future large length scale capillary fluid systems for spacecraft as well as for small scale capillary systems on Earth.
Similar content being viewed by others
12. References
Weislogel, M. M.: Some Analytical Tools for Fluids Management in Space: Isothermal Capillary Flows Along Interior Corners. Adv. Space Res., vol. 32, No. 2, pp. 163–170, (2003).
Jaekle, D. E. Jr.: Propellant Management Device Conceptual Design and Analysis: Vanes. AIAA-SAE-ASME-ASEE 27th Jt. Propl. Conf., AIAA-91-2172, Sacramento, CA, (June 1991).
Chato, D. J., and Martin T. A.: Vented Tank Resupply Experiment-flight test results, 33rd AIAA-ASME-SAE-ASEE Joint Propulsion Conference, AIAA-97-2815, July 6–9, Seattle, (1997).
Weislogel, M. M., and Collicott S. H.: Analysis of Tank PMD Rewetting Following Thrust Resettling with a Post-Analysis of the Vented Tank Resupply Experiment. NASA CR-2002-211974, (October, 2002).
Dong M., andChatzis I.: The Imbibition and Flow of a Wetting Liquid Along the Corners of a Square Capillary Tube. J. Colloid and Int. Sci., vol. 172, pp. 278–288 (1995).
Langbein, D., and Weislogel M. M.: Dynamics of Liquids in Edges and Corners (DYLCO): IML-2 Experiment for the BDPU. NASA TM 1998-207916 (1998).
Weislogel, M. M.: Capillary Flow in Containers of Polygonal Section. AIAA J., vol. 39, no. 12, pp. 2320–2326 (2001a).
Weislogel, M., Lichter, S.: Capillary Flow in Interior Corners. J. Fluid Mech., vol. 373, pp. 349–378 (Nov. 1998).
Romero, L. A., andYost, F. G.: Flow in an Open Channel Capillary. J. Fluid Mech., vol. 322, pp. 109–129 (1996).
Weislogel, M. M.: Capillary Flow in Interior Corners: the Infinite Column. Phys. of Fluids, vol. 13, no. 11, pp. 3101–3107 (2001).
Weislogel, M. M., andLichter, S.: A Spreading Drop in an Interior Corner: Theory and Experiment. Microgravity Sci. Technol., vol. IX, no. 3, pp. 175–184 (1996).
Weislogel, M. M., andCollicott, S.H.: Capillary Re-Wetting of Vaned Containers: Spacecraft Tank Rewetting Following Thrust Resettling, AIAA J., Vol 42, No. 12, pp. 2551–2607, Dec. 2004.
Weislogel, M.M.: Steady Capillary Flow Along Interior Corners. To appear as NASA technical memorandum, (2006).
Concus, P, andFinn, R.: On the Behavior of a Capillary Surface in a Wedge. Proc. Acad. Sci., vol 63, no. 2, pp. 292–299 (1969).
Concus, P., andFinn, R.: Capillary Surfaces in a Wedge-Differing Contact Angles. Microgravity sci. technol., vol. VII(2), pp. 152–155 (1994).
Weislogel, M. M.: Capillary Flow in an Interior Corner. NASA TM 107364 (1996).
Ayyaswamy, P.S., Catton, I., Edwards, D.K.: Capillary Flow in Triangular Groves. ASME J. of Applied Mech., vol. 41, pp. 332–336 (1974).
Ransohoff, T.C., Radke, C.J.: Laminar Flow of a Wetting Liquid along Corners of a Predominantly Gas-Occupied Noncircular Pore. J. Colloid and Int. Sci., vol. 121, No. 2, p 392 (Feb. 1988).
White, F.: Viscous Fluid Flow. McGraw Hill, New York, Ch. 3 (1974).
Nardin, C. L.: Capillary Driven Flows Along Differentially Wetted Interior Corners. To appear NASA technical memorandum, (2005).
de Lazzer, A., Langbein, D., Dreyer, M. &Rath, J.: Mean Curvature of Liquid Surfaces in Containers of Arbitrary Cross-Section. Microgravity Sci. Technol., vol. IX, no. 3, pp. 208–219 (1996).
Langbein, D.: Capillary Surfaces: Shape — Stability — Dynamics, in Particular Under Weightlessness, Springer Tracts in Modern Physics; vol. 178, Springer-Verlag 2002.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Weislogel, M.M., Nardin, C.L. Capillary driven flow along interior corners formed by planar walls of varying wettability. Microgravity Sci. Technol 17, 45–55 (2005). https://doi.org/10.1007/BF02872087
Received:
Revised:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02872087