Bulletin of Materials Science

, Volume 25, Issue 6, pp 513–515

Improved zinc oxide film for gas sensor applications

  • S. Roy
  • S. Basu

DOI: 10.1007/BF02710540

Cite this article as:
Roy, S. & Basu, S. Bull Mater Sci (2002) 25: 513. doi:10.1007/BF02710540


Zinc oxide (ZnO) is a versatile material for different commercial applications such as transparent electrodes, piezoelectric devices, varistors, SAW devices etc because of its high piezoelectric coupling, greater stability of its hexagonal phase and its pyroelectric property. In fact, ZnO is a potential material for gas sensor applications. Good quality ZnO films were deposited on glass and quartz substrates by a novel CVD technique using zinc acetate as the starting solution. X-ray diffraction confirmed the crystallinity of the zinc oxide film and SEM study revealed uniform deposition of fine grains. Undoped ZnO films were used for detection of dimethylamine (DMA) and H2 at different temperatures by recording the change in resistivity of the film in presence of the test gases. The response was faster and the sensitivity was higher compared to the earlier reported ZnO based sensors developed in our laboratory. The main objective of this work was to study the selectivity of the ZnO film for a particular gas in presence of the others. The operating temperature was found to play a key role in the selectivity of such sensors.


Zinc oxide filmdimethylaminegas sensor

Copyright information

© Indian Academy of Sciences 2002

Authors and Affiliations

  • S. Roy
    • 1
  • S. Basu
    • 1
  1. 1.Materials Science CentreIndian Institute of TechnologyKharagpurIndia