Skip to main content
Log in

Time-dependent evolution of strand transfer length in pretensioned prestressed concrete members

  • Published:
Mechanics of Time-Dependent Materials Aims and scope Submit manuscript

Abstract

For design purposes, it is generally considered that prestressing strand transfer length does not change with time. However, some experimental studies on the effect of time on transfer lengths show contradictory results. In this paper, an experimental research to study transfer length changes over time is presented. A test procedure based on the ECADA testing technique to measure prestressing strand force variation over time in pretensioned prestressed concrete specimens has been set up. With this test method, an experimental program that varies concrete strength, specimen cross section, age of release, prestress transfer method, and embedment length has been carried out. Both the initial and long-term transfer lengths of 13-mm prestressing steel strands have been measured. The test results show that transfer length variation exists for some prestressing load conditions, resulting in increased transfer length over time. The applied test method based on prestressing strand force measurements has shown more reliable results than procedures based on measuring free end slips and longitudinal strains of concrete. An additional factor for transfer length models is proposed in order to include the time-dependent evolution of strand transfer length in pretensioned prestressed concrete members.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14

Similar content being viewed by others

References

  • ACI: ACI 318-11 Building code requirements for reinforced concrete. ACI Committee 318. American Concrete Institute, Farmington Hills, MI (2011)

  • AENOR: UNE 36094:1997 Alambres y cordones de acero para armaduras de hormigón pretensado. Asociación Española de Normalización: Madrid (1997)

  • Balevicius, R.: An average stress strain approach to creep analysis of RC uncracked elements. Mech. Time-Depend. Mater. 14, 69–89 (2010)

    Article  Google Scholar 

  • Barnes, R.W., Grove, J.W., Burns, N.H.: Experimental assessment of factors affecting transfer length. ACI Struct. J. 100(6), 740–748 (2003)

    Google Scholar 

  • Base, G.D.: Some tests on the effect of time on transmission length in pretensioned concrete. Mag. Concr. Res. 4, 73–82 (1957)

    Article  Google Scholar 

  • Base, G.D.: An investigation of transmission length in pretensioned concrete. Cement and Concrete Association, Research Report n 5 (1958)

  • Bruce, R.N., Russell, H.G., Roller, J.J., Martin, B.T.: Feasibility evaluation of utilizing high-strength concrete in design and construction of highway bridge structures. Louisiana Transportation Research Center. Report n\(^{\rm{o}}\) FHWA/LA-94-282. Baton Rouge, LA (1994)

  • Buckner, C.D.: A review of strand development length for pretensioned concrete members. PCI J. 40(2), 84–105 (1995)

    Google Scholar 

  • CEN: European standard EN 197-1:2000: Cement. Part 1: Compositions, specifications and conformity criteria for common cements. Comité Européen de Normalisation, Brussels (2000)

  • Cousins, Th.E., Johnston, D.W., Zia, P.: Transfer length of epoxy-coated prestressing strand. ACI Mater. J. 87(3), 193–203 (1990)

    Google Scholar 

  • Deatherage, J.H., Burdette, E., Chew, Ch.K.: Development length and lateral spacing requirements of prestressing strand for prestressed concrete bridge girders. PCI J. 39(1), 70–83 (1994)

    Google Scholar 

  • den Uijl, J.A.: Bond modelling of prestressing strand. In: Bond and Development of Reinforcement (SP 180-7), pp. 145–169. ACI International, Farmington Hills (1998)

    Google Scholar 

  • Dorsten, V., Hunt, F.F., Preston, H.K.: Epoxy coated seven-wire strand for prestressed concrete. PCI J. 29(4), 100–109 (1984)

    Google Scholar 

  • Evans, R.H.: Research and developments in pre-stressing. Proc., Inst. Civ. Eng. 35, 231–261 (1951)

    Google Scholar 

  • Evans, R.H., Robinson, W.R.: Bond stresses in prestressed concrete from X-ray photographs. Proc., Inst. Civ. Eng. 6(14), 212–235 (1955)

    Article  Google Scholar 

  • FIB: Model Code 2010 (First complete draft). FIB Bulletin n55. International federation for structural concrete. Lausanne (2010)

  • Floyd, R.W., Howland, M.B., Hale, W.M.: Evaluation of strand bond equations for prestressed members cast with self-consolidating concrete. Eng. Struct. 33, 2879–2887 (2011)

    Article  Google Scholar 

  • Girgis, A.F., Tuan, Ch.Y.: Bond strength and transfer length of pretensioned bridge girders cast with self-consolidating concrete. PCI J. 50(6), 72–87 (2005)

    Google Scholar 

  • Grace, N.F.: Transfer length of CFRP/CFCC strands for double-T girders. PCI J. 45(5), 110–126 (2000)

    Google Scholar 

  • Guyon, Y.: Béton Précontrainte. Étude Théorique et Experiméntale. Eyrolles, Paris (1953)

    Google Scholar 

  • Holmberg, A., Lindgren, S.: Anchorage and prestress transmission. National Swedish Building Research, Document D1/1970 (1970)

  • Issa, M.A., Sen, R., Amer, A.: Comparative study of transfer length in fiberglass and steel pretensioned concrete members. PCI J. 38(6), 52–63 (1993)

    Google Scholar 

  • Kaar, P.H., LaFraugh, R.W., Mass, M.A.: Influence of concrete strength on strand transfer length. PCI J. 8(5), 47–67 (1963)

    Google Scholar 

  • Kahn, L.F., Dill, J.C., Reutlinger, C.G.: Transfer and development length of 15-mm strand in high performance concrete girders. J. Struct. Eng. 128(7), 913–921 (2002)

    Article  Google Scholar 

  • Kose, M.M., Burkett, W.R.: Formulation of new development length equation for 0.6 in prestressing strand. PCI J. 50(5), 96–105 (2005)

    Google Scholar 

  • Krishnamurthy, D.: Influencia del procedimiento de destesado sobre las tensiones en las zonas de anclaje y sobre la longitud de transmisión, en elementos de hormigón pretensado con armaduras pretesas. Traslation of paper published in The Indian Concrete Journal 44(3). Hormigón y Acero June, 49–65 (1970)

  • Lane, S.N.: A new development length equation for pretensioned strands in bridge beams and piles. Federal Highway Administration. Research FHWA-RD-98-116, Mclean, VA (1998)

  • Larson, K.H., Peterman, R.J., Esmaeily, A.: Bond characteristics of self-consolidating concrete for prestressed bridge girders. PCI J. 52(4), 44–57 (2007)

    Google Scholar 

  • Logan, D.R.: Acceptance criteria for bond quality of strand for pretensioned prestressed concrete applications. PCI J. 42(2), 52–90 (1997)

    Google Scholar 

  • Lu, Z., Boothby, Th.E., Bakis, Ch.E., Nanni, A.: Transfer and development lengths of FRP prestressing tendons. PCI J. 45(2), 84–95 (2000)

    Google Scholar 

  • Mahmoud, Z.I., Rizkalla, S.H., Zaghloul, E.R.: Transfer and development lengths of carbon fiber reinforcement polymers prestressing reinforcing. ACI Struct. J. 96(4), 594–602 (1999)

    Google Scholar 

  • Martí-Vargas, J.R., Serna-Ros, P., Fernández-Prada, M.A., Miguel-Sosa, P.F., Arbeláez, C.A.: Test method for determination of the transmission and anchorage lengths in prestressed reinforcement. Mag. Concr. Res. 58(1), 21–29 (2006a)

    Article  Google Scholar 

  • Martí-Vargas, J.R., Arbeláez, C.A., Serna-Ros, P., Fernández-Prada, M.A., Miguel-Sosa, P.F.: Transfer and development lengths of concentrically prestressed concrete. PCI J. 51(5), 74–85 (2006b)

    Google Scholar 

  • Martí-Vargas, J.R., Serna-Ros, P., Arbeláez, C.A., Rigueira-Victor, J.W.: Bond behaviour of self-compacting concrete in transmission and anchorage. Mater. Constr. 56(284), 27–42 (2006c)

    Google Scholar 

  • Martí-Vargas, J.R., Arbeláez, C.A., Serna-Ros, P., Navarro-Gregori, J., Pallarés-Rubio, L.: Analytical model for transfer length prediction of 13 mm prestressing strand. Struct. Eng. Mech. 26(2), 211–229 (2007a)

    Article  Google Scholar 

  • Martí-Vargas, J.R., Arbeláez, C.A., Serna-Ros, P., Castro-Bugallo, C.: Reliability of transfer length estimation from strand end slip. ACI Struct. J. 104(4), 487–494 (2007b)

    Google Scholar 

  • Martí-Vargas, J.R., Serna, P., Navarro-Gregori, J., Bonet, J.L.: Effects of concrete composition on transmission length of prestressing strands. Constr. Build. Mater. 27, 350–356 (2012a)

    Article  Google Scholar 

  • Martí-Vargas, J.R., Serna, P., Navarro-Gregori, J., Pallarés, L.: Bond of 13 mm prestressing steel strands in pretensioned concrete members. Eng. Struct. 41, 403–412 (2012b)

    Article  Google Scholar 

  • Martí-Vargas, J.R., Caro, L.A., Serna, P.: Experimental technique for measuring the long-term transfer length in prestressed concrete. Strain. doi:10.1111/str.12019 (2012c)

    Google Scholar 

  • Marshall, G.: End anchorage and bond stress in prestressed concrete. Mag. Concr. Res. 1, 123–127 (1949)

    Article  Google Scholar 

  • Mayfield, B., Davies, G., Kong, F.K.: Some tests on the transmission length and ultimate strength of pretensioned concrete beams incorporating Dyform strand. Mag. Concr. Res. 22(73), 219–226 (1970)

    Article  Google Scholar 

  • Mitchell, D., Cook, W.D., Khan, A.A., Tham, Th.: Influence of high strength concrete on transfer and development length of pretensioning strand. PCI J. 38(3), 52–66 (1993)

    Google Scholar 

  • Nanni, A., Utsunomiya, T., Yonekura, H., Tanigaki, M.: Transmission of prestressing force to concrete by bonded fiber reinforced plastic tendons. ACI Struct. J. 89(3), 335–344 (1992)

    Google Scholar 

  • Oh, B.H., Kim, E.S.: Realistic evaluation of transfer lengths in pretensioned, prestressed concrete members. ACI Struct. J. 97(6), 821–830 (2000)

    Google Scholar 

  • Peterman, R.J.: The effects of as-cast depth and concrete fluidity on strand bond. PCI J. 52(3), 72–101 (2007)

    Google Scholar 

  • Pozolo, A.M., Andrawes, B.: Transfer length in prestressed self-consolidating concrete box and I-girders. ACI Struct. J. 108(3), 341–349 (2011)

    Google Scholar 

  • Ramirez, J.A., Russell, B.W.: Transfer, development, and splice length for strand/reinforcement in High-Strength Concrete. NCHRP Report 603. National Cooperative Highway Research Program (2008)

  • Russell, B.W., Burns, N.H.: Measured transfer lengths of 0.5 and 0.6 in strands in pretensioned concrete. PCI J. 41(5), 44–65 (1996)

    Google Scholar 

  • RILEM: RPC6 Specification for the test to determine the bond properties of prestressing tendons. Réunion Internationale des Laboratoires et Experts des Matériaux, Systèmes de Constructions et Ouvrages, Bagneux., France (1979)

  • Roller, J.J., Martin, B.T., Russell, H.G., Bruce, R.N.: Performance of prestressed high strength concrete bridge girders. PCI J. 38(3), 34–45 (1993)

    Google Scholar 

  • Shahawy, M., Issa, M., Batchelor, B.: Strand transfer lengths in full scale AASHTO prestressed concrete girders. PCI J. 37(3), 84–96 (1992)

    Google Scholar 

  • Shing, P.B., Frangopol, D.M., McMullen, M.L., Hutter, W., Cooke, D.E., Leonard, M.A.: Strand development and transfer length tests on high performance concrete box girders. PCI J. 45(5), 96–109 (2000)

    Google Scholar 

  • Soudki, K., Green, M., Clapp, F.: Transfer length of carbon fiber rods in precast pretensioned concrete beams. PCI J. 42(5), 78–87 (1997)

    Google Scholar 

  • Staton, B.W., Do, N.H., Ruiz, E.D., Hale, W.M.: Transfer lengths of prestressed beams cast with self-consolidating concrete. PCI J. 54(2), 64–83 (2009)

    Google Scholar 

  • Swamy, R.N., Anand, K.L.: Losses in transmission length and prestress in high alumina cement concrete. Proc., Inst. Civ. Eng. 59, 293–307 (1975)

    Article  Google Scholar 

  • Tabatabai, H., Dickson, Th.: The history of the prestressing strand development length equation. PCI J. 38(5), 64–75 (1993)

    Google Scholar 

  • Tadros, M.K., Baishya, M.C.: Discussion of a review of strand development length for pretensioned concrete members. PCI J. 41(2), 112–127 (1996)

    Google Scholar 

  • Trent, J.: Transfer length, development length, flexural strength, and prestress loss evaluation in pretensioned self-consolidating concrete members. MS Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA (2007)

  • Weerasekera, I.: Transfer and Flexural Bond in Pretensioned Prestressed Concrete. UMI Dissertation Services, University of Calgary (1991). Dissertation, ISBN 0-315-71095-5

    Google Scholar 

  • William, G.W., Shoukry, S.N., Riad, M.Y.: Development of early age shrinkage stresses in reinforced concrete bridge decks. Mech. Time-Depend. Mater. 12, 343–356 (2008)

    Article  Google Scholar 

  • Zia, P., Mostafa, T.: Development length of prestressing strands. PCI J. 22(5), 54–65 (1977)

    Google Scholar 

  • Zou, P.X.V.: Long-term properties and transfer length of fiber-reinforced polymers. J. Compos. Constr. 7(1), 10–19 (2003)

    Article  Google Scholar 

Download references

Acknowledgements

Funding for this experimental research work has been provided by the Spanish Ministry of Education and Science and ERDF (Projects BIA2006-05521 and BIA2009-12722). Tests have been conducted at the Institute of Concrete Science and Technology (ICITECH), at the Universitat Politècnica de València (Spain).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to J. R. Martí-Vargas.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Caro, L.A., Martí-Vargas, J.R. & Serna, P. Time-dependent evolution of strand transfer length in pretensioned prestressed concrete members. Mech Time-Depend Mater 17, 501–527 (2013). https://doi.org/10.1007/s11043-012-9200-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11043-012-9200-2

Keywords

Navigation