Abstract
A simple and reliable approach for fabricating circular nanofluidic channels in polydimethylsiloxane (PDMS) microfluidic systems is described, which uses core–sheath nanofibers as sacrificial molds. The core–sheath structures consist of an electrospun polyvinylpyrrolidone (PVP) core and a sputtered aluminum sheath. The rupture of the sheath during master template releasing allows easy removal of the nanofibers to form the nanochannels. Straight nanochannels with the diameter as small as 390 nm are demonstrated. This technology is advantageous over existing nanochannel fabrication approaches in reduced risks of fluidic leakage and channel blocking, simpler fabrication process, lower cost and easier dimension control. This work provides a solid technical basis that enables development of various on-chip analytical devices for investigation of the unique transport phenomena at nanoscale.
This is a preview of subscription content, log in via an institution to check access.
References
Bellan LM, Strychalski EA, Craighead HG (2008) Nanochannels fabricated in polydimethylsiloxane using sacrificial electrospun polyethylene oxide nanofibers. J Vac Sci Technol B 26(5):1728–1731
Chen X, Xu S, Yao N, Shi Y (2010) 1.6 V nanogenerator for mechanical energy harvesting using PZT nanofibers. Nano Lett 10:2133–2137
Cho YH, Lee SW, Fujii T, Kim BJ (2008) Fabrication of silicon dioxide nanochannel arrays without nanolithography for manipulation of DNA molecule. Microelectron Eng 85:1275–1277
Cho YH, Park J, Park H, Cheng X, Kim BJ, Han A (2010) Fabrication of high-aspect-ratio polymer nanochannels using a novel Si nanoimprint mold and solvent-assisted sealing. Microfluid Nanofluid 9:163–170
Chu K, Kim S, Chung H, Oh J, Seong T, An BH, Kim YK, Park JH, Do YR, Kim W (2010) Fabrication of monolithic polymer nanofluidic channels using nanowires as sacrificial templates. Nanotechnology 21:425302
Foquet M, Korlach J, Zipfel WR, Webb WW, Craighead HG (2004) Focal volume confinement by submicrometer-sized fluidic channels. Anal Chem 76(6):1618–1626
Gong W, Xue J, Zhuang Q, Wu X, Xu S (2010) Fabrication of nanochannels with water-dissolvable nanowires. Nanotechnology 21:195302
Guder F, Yang Y, Krger M, Stevens GB, Zacharias M (2010) Atomic layer deposition on phase-shift lithography generated photoresist patterns for 1D nanochannel fabrication. Appl Mater Interfaces 2(12):3473–3478
Huang Z, Zhang Y, Kotaki M, Ramakrishna S (2003) A review on polymer nanofibers by electrospinning and their applications in nanocomposites. Compos Sci Technol 63(15):2223–2253
Huh D, Mills KL, Zhu X, Burns MA, Thouless MD, Takayama S (2007) Tunable elastomeric nanochannels for nanofluidic manipulation. Nat Mater 6(6):424–428
Jo K, Schramm TM, Schwartz DC (2009) A single-molecule barcoding system using nanoslits for DNA analysis: nanocoding. Methods Mol Biol 544:29–42
Lee C, Yang EH, Myung NV, George T (2003) A nanochannel fabrication technique without nanolithography. Nano Lett 3(10):1339–1340
Li D, Wang Y, Xia Y (2003) Electrospinning of polymeric and ceramic nanofibers as uniaxially aligned arrays. Nano Lett 3:1167–1171
Liang X, Morton KJ, Austin RH, Chou SY (2007) Single sub-20 nm wide, centimeter-long nanofluidic channel fabricated by novel nanoimprint mold fabrication and direct imprinting. Nano Lett 7(12):3774–3780
Lin PK, Fu CC, Chen YL, Chen YR, Wei PK, Kuan CH, Fann WS (2007) Static conformation and dynamics of single DNA molecules confined in nanoslits. Phys Rev E 76((1 Pt 1)):011806
Mao P, Han J (2009) Massively-parallel ultra-high-aspect-ratio nanochannels as mesoporous membranes. Lab Chip 9(4):586–591
Nichols KP, Eijkel JC, Gardeniers HJ (2008) Nanochannels in SU-8 with floor and ceiling metal electrodes and integrated microchannels. Lab Chip 8(1):173–175
Roy P, Dey T, Lee K, Kim D, Fabry B, Schmuki P (2010) Size-selective separation of macromolecules by nanochannel titania membrane with self-cleaning (declogging) ability. J Am Chem Soc 132(23):7893–7895
Tas NR, Mela P, Kramer T, Berenschot JW, van den Berg A (2003) Capillarity induced negative pressure of water plugs in nanochannels. Nano Lett 3(11):1537–1540
Wang MH, Jing N, Su C, Kameoka J, Chou CK, Hung MC, Chang KA (2006) Electrospinning of silica nanochannels for single molecule detection. Appl Phys Lett 88:033106
Wnek GE, Carr ME, Simpson DG, Bowlin GL (2003) Electrospinning of nanofiber fibrinogen structures. Nano Lett 3(2):213–216
Xu S, Shi Y, Kim SG (2006) Fabrication and mechanical property of nano piezoelectric fibres. Nanotechnology 17:4497–4501
Zhang L, Gu FX, Tong LM, Yin XF (2008) Simple and cost-effective fabrication of two-dimensional plastic nanochannels from silica nanowire templates. Microfluid Nanofluid 5:727–732
Acknowledgments
The authors acknowledge the Center for Emergent Materials at the Ohio State University, an NSF MRSEC (Award Number DMR-0820414), and OSU Institute for Materials Research for providing partial funding for this research.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xu, S., Zhao, Y. Monolithic fabrication of nanochannels using core–sheath nanofibers as sacrificial mold. Microfluid Nanofluid 11, 359–365 (2011). https://doi.org/10.1007/s10404-011-0801-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10404-011-0801-x