Abstract
In this study, pyrrole monomer is polymerized on carbon nanofibres (CNFs) via electropolymerization. This is a new technique to produce a chemically bonded CNF–polypyrrole composite. Deposition of the polypyrrole (PPy) on the nanofibres was optimized by varying the degree of deposition and deposition speed. Optimization studies have proven that the high deposition amounts result in blocks of polymers, which can be overcome through tuning the degree of polymerization by means number of cycles of electropolymerization and the scan rate of the electropolymerization.
Similar content being viewed by others
References
Conway BE (1999) Electrochemical supercapacitors—scientific fundamentals and technological applications. Kluwer Academic/Plenum, New York
Frackowiack E, Béguin F (2001) Carbon materials for the electrochemical storage of energy in capacitors. Carbon 39(6):937–950
Kötz R, Carlen M (2000) Principles and applications of electrochemical capacitors. Electrochim Acta 45(15–16):2483–2498
Kim J-H, Sharma AK, Lee Y-S (2006) Synthesis of polypyrrole and carbon nano-fiber composite for the electrode of electrochemical capacitors. Materials Letters 60(13–14):1697–1701
Roth S, Carroll D (2004) One-dimensional metals: conjugated polymers, organic crystals, carbon nanotubes. Wiley-VCH, New York
Shi H (1996) Activated carbons and double layer capacitance. Electrochim Acta 41(10):1633–1639
Frackowiak E, Béguin F (2002) Electrochemical storage of energy in carbon nanotubes and nanostructured carbons. Carbon 40:1775–1787
Frackowiak E et al (2001) Nanotubular materials for supercapacitors. J Power Sour 97–98:822–825
Peña R (2002) Electrochemical synthesis of conducting polymers on carbon nanotube films and its effect on electrochemical capacitance 2002, Welch Summer Scholar Program, The University of Texas at Austin
Khomenkoa V, Frackowiak E, Béguin F (2005) Determination of the specific capacitance of conducting polymer/nanotubes composite electrodes using different cell configurations. Electrochim Acta 50(12):2499–2506
Dumanli AG, Erden A, Yürüm Y (2008) Production of CNTs and CNFs and utilization in the manufacture of super-capacitors, in German-Turkish symposium: development and technology of carbons, Istanbul
Mastragostino M, Arbizzani C, Soavi F (2002) Conducting polymers as electrode materials in supercapacitors. Solid State Ionics 148(3):493–498
Rudge A et al (1994) Conducting polymers as active materials in electrochemical capacitors. J Power Sour 47(1–2):89–107
Açık M, Barıştıran C, Sönmez G (2006) Highly surfaced polypyrrole nanonetworks and nanofibers. J Mater Sci 41(14):4678–4683
Dumanli AG, Yürüm Y (2011) Carbon nanotube and nanofiber growth on Zn-based catalysts. Fuller Nanotubes Carbon Nanostruct 19(3):155–165
Brunauer S, Emmett PH, Teller E (1938) Adsorption of gases in multimolecular layers. J Am Chem Soc 60(1):309–319
Acknowledgments
The authors would like to acknowledge The Scientific and Technological Research Council of Turkey (TUBITAK) supported the study through Project No: 104T552.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dumanlı, A.G., Erden, A. & Yürüm, Y. Development of supercapacitor active composites by electrochemical deposition of polypyrrole on carbon nanofibres. Polym. Bull. 68, 1395–1404 (2012). https://doi.org/10.1007/s00289-011-0649-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00289-011-0649-y