Skip to main content
Log in

Approximate solutions to the Stefan problem with internal heat generation

Heat and Mass Transfer Aims and scope Submit manuscript

Abstract

Using a quasi-static approach valid for Stefan numbers less than one, we derive approximate equations governing the movement of a phase change front for materials which generate internal heat. These models are applied for both constant surface temperature and constant surface heat flux boundary conditions, in cylindrical, spherical, plane wall and semi-infinite geometries. Exact solutions with the constant surface temperature condition are obtained for the steady-state solidification thickness using the cylinder, sphere, and plane wall geometries which show that the thickness depends on the inverse square root of the internal heat generation. Under constant surface heat flux conditions, closed form equations can be obtained for the three geometries. In the case of the semi-infinite wall, we show that for constant temperature and constant heat flux out of the wall conditions, the solidification layer grows then remelts.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

Abbreviations

a, b, c :

temperature profile constants

c p :

specific heat

Δh f :

latent heat of fusion

k :

thermal conductivity

L :

half-width of plane wall

\(\dot{q}\) :

internal heat generation

Q:

nondimensional internal heat generation (constant temperature)

Q f :

nondimensional heat flux (semi-infinite wall)

\(\dot{Q}\) :

nondimensional internal heat generation (constant heat flux)

Q′′:

nondimensional heat flux

r :

radius variable

r 0 :

radius of cylinder or sphere

s :

distance to the phase change front (for cylinder, spherical and plane wall geometries)

\(\tilde{s}\) :

nondimensional distance to phase change front (semi-infinite wall)

St :

Stefan number

t :

time

\(\tilde{t}\) :

nondimensional time (semi-infinite wall)

T :

temperature

T 0 :

surface temperature

T m :

melting or fusion temperature

x :

distance variable

α:

thermal diffusivity

ρ:

density

τ:

Fourier number

ξ:

nondimensional distance to the phase change front

liq:

liquid phase

sol:

solid phase

References

  1. Rubenstein LI (1971) The Stefan problem. AMS Publishers, Providence

    Google Scholar 

  2. Burmeister LC (1993) Convective heat transfer. Wiley, New York, pp 81–88

    Google Scholar 

  3. Yao LS, Prusa J (1989) Melting and freezing. Adv Heat Transf 19:1–95

    MATH  Google Scholar 

  4. Viskanta R (1988) Heat transfer during melting and solidification of metals. J Heat Transf 110:1205–1219

    Article  Google Scholar 

  5. Huppert HE (1990) The fluid mechanics of solidification. J Fluid Mech 212:209–240

    Article  MathSciNet  Google Scholar 

  6. Worster MG (1991) Natural convection in a mushy layer. J Fluid Mech 224:335–359

    Article  MATH  Google Scholar 

  7. Chen WL, Ishii M, Grolmes MA (1976) Simple heat conduction model with phase change for reactor fuel pin. Nucl Sci Eng 60:452–460

    Google Scholar 

  8. El-Genk M, Cronenberg AW (1978) An assessment of fuel freezing and drainage phenomena in a reactor shield plug following a core disruptive accident. Nucl Eng Des 47:195–225

    Article  Google Scholar 

  9. Kikuchi Y, Shigemasa Y (1982) Liquid solidification in laminar tube flow with internal heat generation. Nucl Eng Des 75:73–80

    Article  Google Scholar 

  10. Chan SH, Cho DH, Kocamustafaogullari G (1983) Melting and solidification with internal radiative transfer—a generalized phase change model. Int J Heat Mass Transf 26:621–633

    Article  Google Scholar 

  11. Chan SH, Hsu KY (1984) Applications of a generalized phase change model for melting and solidification of materials with internal heat generation. In: Proceedings AIAA 19th thermophysics conference, Snowmass, CO

  12. Uglov AA, Sagdedinov OG (1992) Solution to the Stefan problem in the case of volume heat generation. Sov Tech Phys Lett 18:10–11

    Google Scholar 

  13. Lock GSH (1994) Latent heat transfer: an introduction to fundamentals. Oxford, New York, pp 84

    Google Scholar 

  14. Siahpush A (2002) Performance enhancement of solid/liquid phase-change thermal energy storage systems through the use of a high conductivity porous metal matrix. Ph.D. dissertation, University of Idaho

  15. Incropera FP, DeWitt DP (2002) Introduction to heat transfer, 4th edn. Wiley, New York, pp 100–110

    Google Scholar 

  16. Poulikakos D (1994) Conduction heat transfer. Prentice-Hall, Englewood Cliffs, p 224

    Google Scholar 

  17. Siahpush A, Crepeau JC (2004) Integral solutions of phase change with internal heat generation. In: Proceedings of the 12th international conference on nuclear engineering, paper 49412, Arlington, Virginia

  18. Jiji L, Gaye S (2006) Analysis of solidification and melting of PCM with energy generation. Appl Therm Eng 26:568–575

    Article  Google Scholar 

  19. Jiji L (2000) Heat conduction. Begell House, New York

    Google Scholar 

  20. Cheung FB, Chawla TC, Pederson DR (1984) The effects of heat generation and wall interaction on freezing and melting in a finite slab. Int J Heat Mass Transf 27:29–37

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to John Crepeau.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Crepeau, J., Siahpush, A. Approximate solutions to the Stefan problem with internal heat generation. Heat Mass Transfer 44, 787–794 (2008). https://doi.org/10.1007/s00231-007-0298-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00231-007-0298-8

Keywords

Navigation