Abstract
Three approaches to the problem of fatigue-resistant materials are reviewed and discussed. The macroparametric approach, which utilizes semiempirical equations to predict the effects of fracture stress, fracture ductility, and the cyclic strain-hardening exponent on fatigue, is useful for screening and selecting fatigue-resistant materials. The microstructural approach, which relates microstructure to the various stages of fatigue, is useful for designing new alloys and thermomechanical treatments to achieve fatigue resistance. The third approach utilizes fundamental deformation characteristics of materials to form a unifying rationale with which to describe fatigue behavior. Such concepts as slip-mode, stacking fault energy, and slip homogenization are discussed. Examples from the literature are cited to illustrate the degree of success which has been achieved with each approach. Some of the more promising future directions for developing fatigue resistance are also discussed.
Similar content being viewed by others
References
J. Morrow:Amer. Soc. Test. Mater., Spec. Tech. Publ. 378, 1965, p. 45.
C. E. Feltner and P. Beardmore:Amer. Soc. Test. Mater., Spec. Tech. Publ. 467, 1970, p. 77.
R. W. Landgraf:A mer. Soc. Test. Mater, Spec. Tech. Publ. 467, 1970, p. 3.
S. S. Manson:Exp. Mech., 1965, vol. 5, p. 193.
0. H. Basquin:Proc. ASTM, 1910, vol. 10, p. 625.
S. S. Manson:NACA Tech Notes, 1954, p. 2933.
L. F. Coffin:Trans. ASME, 1954, vol. 76, p. 931.
For a summary see J. C. Grosskreutz:Proc. of the Air Force Conf. on Fatigue and Fracture of Aircraft Structures and Materials, AFFDL TR-70-144 (Air Force Flight Dynamics Laboratory, Wright-Patterson AFB, Ohio) p. 47.
B. Tomkins:Phil. Mag., 1968, vol. 18, p. 1041.
J. M. Klafft:Amer. Soc. Test. Mater., Spec. Tech. Publ. 415, 1967, p. 483.
J. F. Throop and G. A. Miller:Amer. Soc. Test. Mater., Spec. Tech. Publ. 467, 1970, p. 154.
R. P. Wei, P. M. Talda, and Che-Yu Li:Amer. Soc. Test. Mater, Spec. Tech. Publ. 467, 1970, p. 460.
C. E. Feltner and R. W. Landgraf:Selecting Materials to Resist Low-Cycle Fatigue, Trans. ASME, Journal of Basic Engrg, 1971, vol. 93, p. 444.
C.E. Feltner and C. Laird:ActaMet., 1967, vol. 15, p. 1621.
D. V. Nelson, R. E. Ricklefs, and W. P. Evans:Amer. Soc. Test. Mater, Spec. Tech. Publ. 467, 1970, p. 228.
D. K. Benson:Amer. Soc. Test. Mater., Spec. Tech. Publ. 467, 1970, p. 228.
J. C. Grosskreutz:The Effect of Surface Films on Fatigue Crack Initiation, paper to be published in theProceedings of the Corrosion Fatigue Conference (NACEj, Storrs, Connecticut, June 1971.
D. H. Avery and W. A. Backofen:Fracture of Solids, p. 339, John Wiley, New York, 1963.
W. E. Duckworth:Metallurgia, 1964, vol. 9, p. 63.
J. C. Grosskreutz, G. G. Shaw, and D. K. Benson:The Effect of Inclusion Size and Distribution on Fatigue of 2024-T4 Aluminum, AFML-TR-69-121, Air Force Materials Laboratory, Wright-Patterson Air Force Base, Ohio, 1969.
C. M. Lyne and A. Kasak:Trans. ASM, 1968, vol. 61, p. 10.
J. Lankford and F. N. Kusenberger: Southwest Research Institute, San Antonio, Texas, unpublished research, 1971.
P. G. Forrest and A. E. Täte:J. Inst. Metals, 1964–65, vol. 93, p. 438.
C. Laird:Amer. Soc. Test. Mater, Spec. Tech. Publ. 415, 1967, p. 131.
D. Broek:Fracture 1969, p. 754, Chapman and Hall, Ltd., London, 1969.
B. Tomkins:Phil. Mag., 1971, vol. 23, p. 687.
D. Broek: Doctoral Thesis, Technical University, Delft, Netherlands, 1971.
R. M. Pelloux: inUltraflne-Grain Materials, p. 231, Syracuse Univ. Press, Syracuse, New York, 1970.
D. K. Benson, J. C. Grosskreutz, and G. G. Shaw:Mechanisms of Fatigue in Ti-6Al-4Vat Room Temperature and 600°F, Met. Trans., 1972 (in press).
J. J.Lucas and P.P. Konieczny:Afef. Trans., 1971, vol. 2, p. 911.
M. Ronay:Proc. of the A ir Force Conf on Fatigue and Fracture of A ircraft Structures and Materials, p. 99, AFFDL-TR-70-144, Air Force Flight Dynamics Laboratory, Wright-Patterson Air Force Base, Ohio, 1970.
A. J. McEvily, Jr. and R. C. Boettner:Acta Met, 1963, vol. 11, p. 725.
G. A. Miller, D. H. Avery, and W. A. Backofen:Trans. TMS-AIME, 1966, vol. 236, p. 1967.
A. J. McEvily, Jr. and T. L. Johnston:Int. J. Fract. Mech., 1967, vol. 3, p. 45.
F. G. Ostermann and W. H. Reimann:Amer. Soc. Test. Mater, Spec. Tech. Publ. 467, 1970, p. 169.
F. G. Ostermann:Met. Trans., 1971, vol. 2, p. 2897.
C. Laird and G. Thomas:Int. J. Fracture Mech., 1967, vol. 3, p. 81.
A. R. Krause and C. Laird:Mater. Sci. Eng., 1967-68, vol. 2, p. 331.
A. J. McEvily, Jr., J. B. Clark, E. C. Utley, and W. H. Herrnstein, III:Trans. TMS-AIME, 1963, vol. 227, p. 1093.
D. J. Duquette, M. Gell, and J. W. Piteo:Met. Trans., 1970, vol. 1, p. 3107.
G. Langford and M. Cohen:Trans. ASM, 1969, vol. 62, p. 623.
Author information
Authors and Affiliations
Additional information
J. C. GROSSKREUTZ, formerly with Midwest Research Institute, Kansas City, Mo.
Rights and permissions
About this article
Cite this article
Grosskreutz, J.C. strengthening and fracture in fatigue (approaches for achieving high fatigue strength). Metall Trans 3, 1255–1262 (1972). https://doi.org/10.1007/BF02642460
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02642460