TMS 2016 145th Annual Meeting & Exhibition, Annual Meeting Supplemental Proceedings

Edited Proceedings

1. Front Matter

   Pages 1-1

   PDF

2. Additive Forming of Components — Tailoring Specific Material Properties in Low Volume Production

   1. Anisotropic Mechanical Properties in a Big-Sized Ti-6Al-4V Plate Fabricated by Electron Beam Melting

      • Pan Wang, Mui Ling Sharon Nai, Xipeng Tan, Wai Jack Sin, Shu Beng Tor, Jun Wei

      Pages 5-12

   2. Characterization of Microstructure and Mechanical Properties of Direct Metal Laser Sintered 15–5 PH1 Stainless Steel Powders and Components

      • Jing Zhang, Yi Zhang, Xingye Guo, Weng Hoh Lee, Bin Hu, Zhe Lu et al.

      Pages 13-19

3. Materials Research in Reduced Gravity

   1. Effect of Thermal Drift on the Initial Transient Behavior in Directional Solidification of a Bulk Transparent Model Alloy

      • F. L. Mota, N. Bergeon, D. Tourret, A. Karma, R. Trivedi, B. Billia

      Pages 23-30

   2. Rapid Quench in an Electrostatic Levitator

      • Michael P. SanSoucie, Jan R. Rogers, Douglas M. Matson

      Pages 31-34

   3. Simulation of shrinkage-induced macrosegregation in a multicomponent alloy during reduced-gravity solidification

      • Ali Saud, Charles-André Gandin, Michel Bellet, Thomas Volkmann, Dieter Herlach

      Pages 35-42

   4. In Situ Investigation of the Effects of Gravity Level Variations on the Directional Solidification Microstructures During Parabolic Flights

      • L. Abou-Khalil, G. Salloum-Abou-Jaoude, G. Reinhart, C. Pickmann, G. Zimmermann, Y. Houltz et al.

      Pages 43-50

   5. Microstructural Evolution in Undercooled Al–8wt%Fe Melts

      • J. Valloton, A. A. Bogno, J. Chen, R. Lengsdorf, H. Henein, D. M. Herlach et al.

      Pages 51-57

4. Metal and Polymer Matrix Composites II

   1. Degradation Study of High Melt Strength Polypropylene/Clay Nanocomposites in Environmental and Accelerated Conditions

      • Luiz Gustavo Hiroki Komatsu, Duclerc Fernandes Parra, Washington Luiz Oliani, Ademar Benevolo Lugao, Vijaya Kumar Rangari

      Pages 61-67

   2. Nanotube Sheet — Graphite Hybrid Nanocomposite for Damage Detection

      • Jiukun Li, Sirish Namilae

      Pages 69-76

   3. Effect of Nano-Particle Addition on Grain Structure Evolution of Friction Stir Processed Al 6061 During Post-Weld Annealing

      • Guo Junfeng, Lee Bing Yang, Du Zhenglin, Bi Guijun, Tan Ming Jen, Wei Jun

      Pages 77-84

   4. Enhanced Ductility with Significant Increase in Strength of As-Cast CNTs/AZ91D Nanocomposites

      • Rongyu Feng, Lin Zhu, Wenzhen Li

      Pages 85-92

   5. The Synthesis and Processing Self-Healing Structural Al/Mg Lamellar Composite Materials

      • Yasser Fouad, Bakr Mohamed Rabeeh

      Pages 93-100

   6. Filler Surface Nature, Bead, Solution Viscosity and Fibre Diameter of Electrospun Particle-Reinforced Polylactide

      • S. O. Adeosun, E. I. Akpan, O. P. Gbenebor, A. A. Peter, S. A. Olaleye

      Pages 101-108

   7. Evaluation of Intermetallic Reaction Layer Formation Within Steel Encapsulated Metal Matrix Composites

      • Sean Fudger, Eric Klier, Prashant Karandikar, Chaoying Ni

      Pages 109-117

   8. Effect of Load and Grit Size on High Stress Abrasive Wear of Al-Mg-Si Hybrid Composites

      • Kaushik N Ch, Narasimha Rao R

      Pages 119-125

   9. The Corrosion of 30% Mo-ZrO2 Cermet in Molten Slag of CaO-MgO-Al2O3

      • Xiaopeng Li, Ziming Wang, Yang Yang, Yanling Guo, Jieyu Zhang, Wende Dan

      Pages 127-133

   10. Study on Mechanical Property of Porous Titanium by Adding Powder Carbon

       • Guibao Qiu, Hao Cui, Tengfei Lu, Yilong Liao, Yang Yang

       Pages 135-142

   11. Fabrication of Gamma-Irradiated Polypropylene and AgNPs Nanocomposite Films and Their Antimicrobial Activity

       • Isabelle Oliveira Berenguer, Washington Luiz Oliani, Duclerc Fernandes Parra, Luiz Gustavo Hiroki Komatsu, Vinicius Juvino dos Santos, Nilton Lincopan et al.

       Pages 143-150