Abstract
Abrasive wear of individual grits in diamond dressing tools during the dressing of abrasive wheels is studied. The wear rate is assessed analytically allowing for mechanical-statistical and temperature characteristics of the grit operation in dressing with rollers and sticks, as well as for the temperature-induced variations of the diamond hardness. A relationship is established between wear of individual grits and that of the diamond-containing layer as a whole.
Similar content being viewed by others
References
Grigoryev, O.N., Mil’man, Yu.V., Trefilov, V.I., et al., A Study of Diamond Fracture Mechanism in Abrasive Machining Operations, Sint. Almazy, 1972, issue 2, pp. 9–11, issue 4, pp. 5–10.
Tkhagapsoev, Kh.V. and Khanachev, B.S., On Wear of Diamond in Dressing Abrasive Wheels, Sverkhtverdye Materialy, 1987, no. 2, pp. 30–35 [J. Superhard Mater., 1987, no. 2].
Tkhagapsoev, Kh.G., Khapachev, B.S., Gukyamukhov, P.M., et al., Diamond Wear Mechanism in Dressing Tools, Almazy i Sverkhtverdye Materialy, 1979, issue 1, pp. 9–11.
Tkhagapsoev, Kh.G., Khapachev, B.S., Khapachev, Yu.P., et al., Wear Mechanism of Diamond Dressing Tools, Almazy i Sverkhtverdye Materialy, 1982, issue 3, pp. 3–6.
Sheiko, M.N., Matskevich, V.P., Nemets, V.M., and Skok, V.N., Evolution of Working Surface of Diamond Sticks in Dressing, in Suchasni protsesy mekhanichnoi obrobky instrumentamy z NTM ta yakist detalei mashin. Zb. nauk. prats’ (Modern Machining Processes Using Tools of Superhard Materials, and Surface Quality of Engineering Components. Collected Research Papers), Kiev: INM NAN Ukrainy, 2006, pp. 118–125.
Cherepanov, G.P., Mekhanika Khrupkogo Razrusheniya (Brittle Fracture Mechanics), Moscow: Nauka, 1974.
Tkhagapsoev, Kh.G., Shkhanukov, M.Kh., Khanachev, B.S. and Abregov, M.Kh., Determination of Contact Temperature in Diamond Dressing of Abrasive Wheels, Sverkhtverdye Materialy, 1983, no. 4, pp. 44–48 [J. Superhard Mater., 1983, no. 4].
Mechnik, V.A., Improving Efiiciency of Diamond Disk Sawing of Stone Through Minimization of Thermal Stresses in Diamond Grits on the Tool Working Surface, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Bakul Institute for Superhard Materials, Academy of Sciences of Ukrainian SSR, Kiev, 1991.
Andreikiv, A.E., Panasyuk, A.E., and Chernets, M.V., On the Theory of Wear of Materials under Dry Friction Conditions, Fiziko-Khimicheskaya Mekhanika Materialov, 1981, no. 2, pp. 51–57.
Sagarda, A.A., On the Analysis of Wear and Expenditure of Energy in Abrasive Machining of Metals, Sverkhtverdye Materialy, 1987, no. 1, pp. 51–54 [J. Superhard Mater., 1987, no. 1].
Bakul, V.N., Loshak, M.G., and Mal’nev, V.I., Diamond Microhardness and Its Temperature Dependence, Sinteticheskie Almazy, 1978, issue 1, pp. 7–11.
Polupan, B.I. and Baikalov, A.K., Cutting Forces in Diamond Point Dressing of Abrasive Wheels, Sinteticheskie Almazy, 1978, issue 3, pp. 58–61.
Sheiko, M.N., On the Distribution of Parameters of Cuts in Periphery Grinding. Tool Factor and Machining Conditions. Part 1, Sverkhtverdye Materialy, 1993, no. 3, pp. 55–64, 70. [J. Superhard Mater., 1993, no. 3].
Sheiko, M.N., On the Distribution of Parameters of Cuts in Periphery Grinding. Tool Factor and Machining Conditions. Part 1, Sverkhtverdye Materialy, 1993, no. 5, pp. 51–61 [J. Superhard Mater., 1993, no. 5].
Sheiko, M.N., On Calculation of Instantaneous Grit Temperature in Diamond Dressing Tool During Its Operation, in Sovremennye protsessy mekhanicheskoi obrabotki i kachestvo poverkhnostei detalei mashin. Sb. Nauchn. Tr. (Modern Machining Processes and Surface Quality of Engineering Components. Collected Research Papers), Kiev: NAN Ukrainy, Institut Sverkhtverdykh Materialov, 1998, pp. 172–175.
Sheiko, M.N., On Calculation of Instantaneous Temperature on a Diamond Grit in Dressing Tool during Its Operation, Sverkhtverdye Materialy, 2007, no. 5, pp. 57–64 [J. Superhard Mater., 2007, no. 5]
Sheiko, M.M., Performance Characteristics of a Single Grit and Entire Tool in Periphery Grinding in the Context of Mechanical—Statistical Concept of the Process. Part 2. Specific Work of Producing Individual Cuts, Visn. ZhDTU, 2003, no. 3(27), pp. 66–69.
Sheiko, M.N. and Khimach, O.V., Diamond Point Dressing from the Standpoint of Mechanical-Statistical Concepts of Diamond Abrasive Machining. Part 1. Reduction to the Machining Scheme with Continuous Infeed, Sverkhtverdye Materialy, 2004, no. 1, pp. 36–45 [J. Superhard Mater., 2004, no. 1].
Sheiko, M.N. and Khimach, O.V., Diamond Point Dressing from the Standpoint of Mechanical-Statistical Concepts of Diamond Abrasive Machining. Part 2. Some Theoretical Aspects of Operation of a Tool with a Heterogeneous Abrasive Surface, Sverkhtverdye Materialy, 2004, no. 2, pp. 47–52 [J. Superhard Mater., 2004, no. 2].
Author information
Authors and Affiliations
Additional information
Original Russian Text © M.N. Sheiko, 2007, published in Sverkhtverdye Materialy, 2007, Vol. 29, No. 6, pp. 58–64.
About this article
Cite this article
Sheiko, M.N. Abrasive wear of individual grits in diamond rollers and sticks and its relation to the overall tool wear in dressing operations. J. Superhard Mater. 29, 369–374 (2007). https://doi.org/10.3103/S106345760706007X
Received:
Issue Date:
DOI: https://doi.org/10.3103/S106345760706007X