Skip to main content
SpringerLink
Log in

Performance Investigation on Solar Air Heater with Optimized Parabolic Rib Geometry Based on Thermo-Hydraulic Performance

  • SOLAR ENERGY CONCENTRATORS
  • Published:
Applied Solar Energy Aims and scope Submit manuscript

Abstract

To make the solar air heater model more competitive in the commercial space heating and dryer market, it necessitates the need for improvement in its thermal efficiency. This paper evaluates the possibility of enhancing the thermo-hydraulic efficiency of a solar energy-based air heater by modifying the geometry into an artificial roughed parabolic rib-shaped collector. The thermal performance of a modified geometry was analyzed using a 3D CFD model using thermal simulation software, SolidWorks Flow Simulation. The parabolic roughness profile parameters (roughness height (e) and pitch (P) are optimized by providing simulation runs for various values of e = 0.5 mm, e = 1 mm, e = 1.5 mm, e = 2 mm and pitch P = 15 mm and P = 20 mm. Performance optimization of the solar air heater is achieved at e = 1 mm and P = 15 mm at Reynolds number 3900. An experimental investigation of the proposed CFD model was also done to compare the actual results with the CFD results. Various experimental investigations done by relating heat transfer and friction factor have been reported for the comparative study of the thermal performance of various solar air heater ducts. At roughness height e = 1 mm, the optimum rib performance is observed. The experiment results are in line with the simulation results, with a minor deviation of 6.35%.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.
Fig. 6.
Fig. 7.

REFERENCES

  1. Qasem, N.A.A., Arnous, M.N., and Zubair, S.M., A comprehensive thermal-hydraulic assessment of solar flat-plate air heaters, Energy Convers. Manage., 2020, vol. 215, p. 112922. https://doi.org/10.1016/J.ENCONMAN.2020.112922

    Article  Google Scholar 

  2. Prem Kumar, T., Naveen, C., and Premalatha, M., Performance analysis of 2 in 1 parabolic trough collector for both hot water and hot air production for domestic household applications, Appl. Sol. Energy, 2019, vol. 55, no. 6, pp. 397–403. https://doi.org/10.3103/S0003701X19060069/TABLES/3

    Article  Google Scholar 

  3. Rao K, D.V.S.K., Premalatha, M., and Naveen, C., Analysis of different combinations of meteorological parameters in predicting the horizontal global solar radiation with ANN approach: A case study, Renewable Sustainable Energy Rev., 2018, vol. 91, pp. 248–258. https://doi.org/10.1016/J.RSER.2018.03.096

    Article  Google Scholar 

  4. Anil Kumar, S., Sridhar, D.K., and Vinod Kumar, G., Heat transfer analysis of solar air heating system for different tilt angles, Appl. Sol. Energy, 2018, vol. 54, no. 1, pp. 17–22. https://doi.org/10.3103/S0003701X18010085

    Article  Google Scholar 

  5. Abbasov, E.S., Umurzakova, M.A., and Boltoboeva, M.P., Efficiency of solar air heaters, Appl. Sol. Energy, 2016, vol. 52, no. 2, pp. 97–99. https://doi.org/10.3103/S0003701X1602002X

    Article  Google Scholar 

  6. Tyagi, R.K., Ranjan, R., and Kishore, K., Performance studies on flat plate solar air heater subjected to various flow patterns, Appl. Sol. Energy, 2014, vol. 50, no. 2, pp. 98–102. https://doi.org/10.3103/S0003701X14020133

    Article  Google Scholar 

  7. Omojaro, A.P. and Aldabbagh, L.B.Y., Experimental performance of single and double pass solar air heater with fins and steel wire mesh as absorber, Appl. Energy, 2010, vol. 87, no. 12, pp. 3759–3765. https://doi.org/10.1016/J.APENERGY.2010.06.020

    Article  Google Scholar 

  8. Saxena, A., Agarwal, N., and Srivastava, G., Design and performance of a solar air heater with long term heat storage, Int. J. Heat Mass Transfer, 2013, vol. 60, no. 1, pp. 8–16. https://doi.org/10.1016/J.IJHEATMASSTRANSFER.2012.12.044

    Article  Google Scholar 

  9. Orozbaev, M.T., On determining the thermotechnical characteristics of the flat-plate solar air heating collectors, Appl. Sol. Energy, 2007, vol. 43, no. 1, pp. 56–57. https://doi.org/10.3103/S0003701X07010197

    Article  Google Scholar 

  10. Klychev, S.I., Abdurakhmanov, A.A., Bakhramov, S.A., and Turaeva, U.P., Efficiency of solar heat power plants with selective receivers, Appl. Sol. Energy, 2011, vol. 46, no. 4, pp. 271–274. https://doi.org/10.3103/S0003701X10040079

    Article  Google Scholar 

  11. Al-Mamun, M., et al., Analyses and comparison of solar air heater with various rib roughness using computational fluid dynamics (CFD), IOP Conf. Ser.: Mater. Sci. Eng., 2018, vol. 330, no. 1, p. 012061. https://doi.org/10.1088/1757-899X/330/1/012061

  12. Ghritlahre, H.K., Sahu, P.K., and Chand, S., Thermal performance and heat transfer analysis of arc shaped roughened solar air heater—An experimental study, Sol. Energy, 2020, vol. 199, pp. 173–182. https://doi.org/10.1016/J.SOLENER.2020.01.068

    Article  Google Scholar 

  13. Hans, V.S., Saini, R.P., and Saini, J.S., Performance of artificially roughened solar air heaters—A review, Renewable Sustainable Energy Rev., 2009, vol. 13, no. 8, pp. 1854–1869. https://doi.org/10.1016/J.RSER.2009.01.030

    Article  Google Scholar 

  14. Yadav, A.S. and Bhagoria, J.L., A CFD (computational fluid dynamics) based heat transfer and fluid flow analysis of a solar air heater provided with circular transverse wire rib roughness on the absorber plate, Energy, 2013, vol. 55, pp. 1127–1142. https://doi.org/10.1016/J.ENERGY.2013.03.066

    Article  Google Scholar 

  15. Arunkumar, H.S., Vasudeva Karanth, K., and Kumar, S., Review on the design modifications of a solar air heater for improvement in the thermal performance, Sustainable Energy Technol. Assess., 2020, vol. 39, p. 100685. https://doi.org/10.1016/J.SETA.2020.100685

    Article  Google Scholar 

  16. Singh, A.P., Varun, and Siddhartha, Effect of artificial roughness on heat transfer and friction characteristics having multiple arc shaped roughness element on the absorber plate, Sol. Energy, 2014, vol. 105, pp. 479–493. https://doi.org/10.1016/J.SOLENER.2014.04.007

    Article  Google Scholar 

  17. Kumar, A., Saini, R.P., and Saini, J.S., A review of thermohydraulic performance of artificially roughened solar air heaters, Renewable Sustainable Energy Rev., 2014, vol. 37, pp. 100–122. https://doi.org/10.1016/J.RSER.2014.04.063

    Article  Google Scholar 

  18. Prasad, B.N., Behura, A.K., and Prasad, L., Fluid flow and heat transfer analysis for heat transfer enhancement in three sided artificially roughened solar air heater, Sol. Energy, 2014, vol. 105, pp. 27–35. https://doi.org/10.1016/J.SOLENER.2014.03.027

    Article  Google Scholar 

  19. Alam, T., Saini, R.P., and Saini, J.S., Effect of circularity of perforation holes in V-shaped blockages on heat transfer and friction characteristics of rectangular solar air heater duct, Energy Convers. Manage., 2014, vol. 86, pp. 952–963. https://doi.org/10.1016/J.ENCONMAN.2014.06.050

    Article  Google Scholar 

  20. Bekele, A., Mishra, M., and Dutta, S., Performance characteristics of solar air heater with surface mounted obstacles, Energy Convers. Manage., 2014, vol. 85, pp. 603–611. https://doi.org/10.1016/J.ENCONMAN.2014.04.079

    Article  Google Scholar 

  21. Wang, D., Liu, J., Liu, Y., Wang, Y., Li, B., and Liu, J., Evaluation of the performance of an improved solar air heater with ‘S’ shaped ribs with gap, Sol. Energy, 2020, vol. 195, pp. 89–101. https://doi.org/10.1016/J.SOLENER.2019.11.034

    Article  Google Scholar 

  22. Shetty, S.P., Paineni, A., Kande, M., Madhwesh, N., Yagnesh Sharma, N., and Vasudeva Karanth, K., Experimental investigations on a cross flow solar air heater having perforated circular absorber plate for thermal performance augmentation, Sol. Energy, 2020, vol. 197, pp. 254–265. https://doi.org/10.1016/J.SOLENER.2020.01.005

    Article  Google Scholar 

  23. Luan, N.T. and Phu, N.M., Thermohydraulic correlations and exergy analysis of a solar air heater duct with inclined baffles, Case Studies Therm. Eng., 2020, vol. 21, p. 100672. https://doi.org/10.1016/J.CSITE.2020.100672

    Article  Google Scholar 

  24. Rajendran, D.R., Ganapathy Sundaram, E., Jawahar, P., Sivakumar, V., Mahian, O., and Bellos, E., Review on influencing parameters in the performance of concentrated solar power collector based on materials, heat transfer fluids and design, J. Therm. Anal. Calorim., 2019, vol. 140, no. 1, pp. 33–51. https://doi.org/10.1007/S10973-019-08759-8

    Article  Google Scholar 

  25. Daliran, A. and Ajabshirchi, Y., Theoretical and experimental research on effect of fins attachment on operating parameters and thermal efficiency of solar air collector, Inf. Process. Agric., 2018, vol. 5, no. 4, pp. 411–421. https://doi.org/10.1016/J.INPA.2018.07.004

    Article  Google Scholar 

  26. Verma, S.K. and Prasad, B.N., Investigation for the optimal thermohydraulic performance of artificially roughened solar air heaters, Renewable Energy, 2000, vol. 20, no. 1, pp. 19–36. https://doi.org/10.1016/S0960-1481(99)00081-6

    Article  Google Scholar 

  27. Thakur, D.S., Khan, M.K., and Pathak, M., Performance evaluation of solar air heater with novel hyperbolic rib geometry, Renewable Energy, 2017, vol. 105, pp. 786–797. https://doi.org/10.1016/J.RENENE.2016.12.092

    Article  Google Scholar 

Download references

ACKNOWLEDGMENTS

The authors would like to thank National Institute of Technology, Tiruchirappalli for their infrastructure and family members for their moral support.

Funding

There is no major funding requirement for the research work and the experimental expenses have been taken care by the self-finance.

Author information

Authors and Affiliations

  1. Department of Electrical and Electronics Engineering, SRMIST, Chennai, India

    C. Naveen

  2. Department of Energy and Environment, National Institute of Technology, Tiruchirappalli, India

    T. S. Selvakumar & M. Premalatha

  3. Department of Mechanical Engineering, PSG Institute of Technology and Applied Research, Coimbatore, India

    T. Prem Kumar

  4. Department of Bio Technology, Kalasalingam Academy of Research and Education, Srivillitputhur, India

    K. Vasumathi

Authors
  1. C. Naveen
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. T. S. Selvakumar
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. T. Prem Kumar
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. M. Premalatha
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. K. Vasumathi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to T. Prem Kumar.

Ethics declarations

The authors declare that they have no conflicts of interest.

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Naveen, C., Selvakumar, T.S., Kumar, T.P. et al. Performance Investigation on Solar Air Heater with Optimized Parabolic Rib Geometry Based on Thermo-Hydraulic Performance. Appl. Sol. Energy 58, 559–566 (2022). https://doi.org/10.3103/S0003701X22040120

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S0003701X22040120

Keywords:

Search

Navigation