Abstract
Recently, ground improvement has become much more feasible. Chemical stabilization is a quick and affordable approach to enhancing soil characteristics. An important avenue of research is discovering alternative materials for use in soil enhancement. Pulverized fuel ash (PFA), which is a waste byproduct of coal power plants, has been shown to reduce the environmental risks and costs involved in construction. In this study, a series of unconfined compressive tests were performed for various mixtures of cement, PFA, and sand; the tests considered both the curing period and the optimum moisture content (OMC). In addition, multiple variable linear regression was used to analyze laboratory data in order to obtain an empirical relationship that can be used to predict the unconfined compressive strength (UCS) of a PFA–cement–sand mixture. The accuracy of the model was verified using statistical indices. The first objective of this study was to assess the effects of PFA content on the UCS of the mixture. The second was to investigate the impact of the OMC on the UCS. The focal point of this study was its derivation of a relationship that can be used to estimate the UCS on the basis of existing variables. The results indicated that PFA can strengthen sand in terms of the UCS and that excessive PFA in a mixture may adversely affect the UCS of a medium. Therefore, a mixture must have an optimum proportion of compounds. The OMC plays a vital role in enhancing UCS. The UCS of different mixtures can be predicted with an acceptable level of accuracy by using the relationship derived in this study.
Similar content being viewed by others
References
Bergen SD, Bolton SM, Fridley JL (2001) Design principles for ecological engineering. Ecol Eng 18:201–210
Terashi M, Juran I (2000) Ground improvement—state of the art. GeoEng 2000. Technomic, Lancaster, pp 461–519
Castro J, Sagaseta C (2011) Deformation and consolidation around encased stone columns. Geotext Geomembr 29:268–276
Gue SS, Tan YC (20005) Chapter 23: failures of ground improvement works in soft ground. In: Indraratna B, Chu J, (eds) Ground improvement—case histories. Elsevier, Amsterdam, pp 665–680
Ea Basha, Hashim R, Mahmud HB, Muntohar aS (2005) Stabilization of residual soil with rice husk ash and cement. Constr Build Mater 19:448–453
Larsson S (2005) State of practice report—execution, monitoring and quality control. In: Proceedings of the international conference on deep mixing, best practice and recent advances. Stockholm, pp 732–786
Vories KC, Throgmorton D (2000) Proceedings of the use and disposal of coal combustion by-products at coal mines: a technical interactive forum at the US Department of Energy, National Energy Technology Laboratory, Morgantown: US Department of Interior, Office of Surface Mining
Prabakar J, Dendorkar N, Morchhale R (2004) Influence of fly ash on strength behavior of typical soils. Constr Build Mater 18(4):263–267
Guleria SP (2011) Unconfined compressive strength of fly ash-lime-gypsum composite mixed with treated tire chips. J Mater Civ Eng 23(8):1255
Pone JDN, Hein Kaa, Stracher GB, Annegarn HJ, Finkleman RB, Blake DR et al (2007) The spontaneous combustion of coal and its by-products in the Witbank and Sasolburg coalfields of South Africa. Int J Coal Geol 72:124–140
Tick HO (2010) Carbon capture and storage potential in coal-fired plant in Malaysia—a review. Renew Sustain Energy Rev 14(9):2697–2709
Okyay US, Dias D (2010) Use of lime and cement treated soils as pile supported load transfer platform. Eng Geol 114:34–44
Kim B, Prezzi M, Salgado R (2005) Geotechnical properties of fly and bottom ash mixtures for use in highway embankments. J Geotech Geoenviron Eng 131:914–924
Huang Y, Bird RN, Heidrich O (2007) A review of the use of recycled solid waste materials in asphalt pavements. Resour Conserv Recycl 52:58–73
Naik TR, Singh SS, Hossain MM (1995) Abrasion resistance of high-strength concrete made with class C fly ash. ACI Mater J 92:649–659
Siddique R (2003) Effect of fine aggregate replacement with Class F fly ash on the mechanical properties of concrete. Cem Concr Res 33:539–547
Janz M, Johansson SE. The function of different binding agents in deep stabilization. Report 9. Swedish Deep Stabilization Research Center, Linkoping: SGI. Linkoping, Sweden2002
ASTM C (2008) Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. Annual Book of ASTM Standards: American Society for Testing and Materials, West Conshohocken, pp 1–4
Cokca E, Çokça E (2001) Use of class C Fly ashes for the stabilization of an expansive soil. J Geotech Geoenviron Eng 127:568–573
Nalbantoğlu Z, Nalbantoğlu Z (2004) Effectiveness of class C fly ash as an expansive soil stabilizer. Constr Build Mater 18:377–381
Zhang M, Javadi A, Min X (2006) Triaxial tests of sand reinforced with 3D inclusions. Geotext Geomembr 24:201–209
Bakharev T (2005) Geopolymeric materials prepared using class F fly ash and elevated temperature curing. Cem Concr Res 35:1224–1232
Xie Z, Xi Y (2001) Hardening mechanisms of an alkaline-activated class F fly ash. Cem Concr Res 31:1245–1249
Bouzoubaa N, Lachemi M (2001) Self-compacting concrete incorporating high volumes of class F fly ash: preliminary results. Cem Concr Res 31:413–420
LaRosa JL, Kwan S, Grutzeck MW (1992) Zeolite formation in class F fly ash blended cement pastes. J Am Ceram Soc 75:1574–1580
Sezer A, Inan G, Yilmaz H, Ramyar K (2006) Utilization of a very high lime fly ash for improvement of Izmir clay. Build Environ 41(2):150–155
Poon CS, Boost M (1996) The stabilization of sewage sludge by pulverized fuel ash and related materials. Environ Int 22:705–710
Asavapisit S, Chotklang D (2004) Solidification of electroplating sludge using alkali-activated pulverized fuel ash as cementitious binder. Cem Concr Res 34:349–353
Goodarzi F (2006) Characteristics and composition of fly ash from Canadian coal-fired power plants. Fuel 85:1418–1427
Fraay ALA, Bijen JM, de Haan YM (1989) The reaction of fly ash in concrete a critical examination. Cem Concr Res 19(2):235–246
Yoon YW, Cheon SH, Kang DS (2004) Bearing capacity and settlement of tire-reinforced sands. Geotext Geomembr 22:439–453
Jo AN, Hafez MA, Norbaya S (2011) Study of bearing capacity of lime–cement columns with pulverized fuel ash for soil stabilization using laboratory model. Electr J Geotech Eng 16:1595–1605
Demir I, Hughes RE, DeMaris PJ (2001) Formation and use of coal combustion residues from three types of power plants burning Illinois coals. Fuel 80:1659–1673
ASTM (2004). Standard practice for characterizing fly ash for use in soil stabilization. D5239
Wayne G, Iwabuchi J, Shaffie R (1989) Influence of cementation on liquefaction of sands. J Geotech Eng 115(8):1102–1117
Kolias S, Kasselouri-Rigopoulou V, Karahalios A (2005) Stabilisation of clayey soils with high calcium fly ash and cement. Cem Concr Compos 27(2):301–313
Stevens J (1982) Unified soil classification system. Civ Eng ASCE 52(12):61–62
Devore JL (2011) Probability and statistics for engineering and the sciences. Thomson Brooks/Cole, Belmont
Chatterjee S, Hadi AS (2006) Regression analysis by example. Wiley, New York, p 607
Openshaw S (1992) Utilization of coal fly ash. M.Sc Thesis, Florida University, p 36
Snelson DG, Kinuthia JM, Davies PA, Chang SR (2009) Sustainable construction: composite use of tyres and ash in concrete. Waste Manag 29:360–367
Larsen T (1985) Use of fly ash in structural concrete. In: Florida in seminar proceedings: fly ash in highway construction, Demonstration Project No. 59, November 1985, U.S. Department of Transportation and Federal Highway Administration, NTIS: PB86186079XSP.1985
Camilleri J, Sammut M, Montesin FE (2006) Utilization of pulverized fuel ash in Malta. Waste Manag 26:853–860
Theodorsson E (1988) BASIC computer program to summarize data using nonparametric and parametric statistics including Anderson–Darling test for normality. Comput Methods Progr Biomed 26(2):207–213
Kamps U (1995) A concept of generalized order statistics. J Stat Plan Inference 48(1):1–23
Vining G, Kowalski S (2010) Statistical methods for engineers. Duxbury Press, Pacific Grove
Acknowledgments
The authors are very grateful for the valuable comments and suggestions of the reviewers. The authors express their sincere thanks for the funding support they received from HIR-MOHE University of Malaya under Grant No. UM.C/HIR/MOHE/ENG/34. This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT & Future Planning (No. NRF-2013R1A1A1060052). They also express their warm gratitude to the IEOS at the University of Malaya for their help in providing facilities.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Motamedi, S., Song, KI. & Hashim, R. Prediction of unconfined compressive strength of pulverized fuel ash–cement–sand mixture. Mater Struct 48, 1061–1073 (2015). https://doi.org/10.1617/s11527-013-0215-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1617/s11527-013-0215-1