Abstract
A noncontact/nondestructive air-coupled acoustic technique to be potentially used in mechanical property determination of bilayer tablets is presented. In the reported experiments, a bilayer tablet is vibrated via an acoustic field of an air-coupled transducer in a frequency range sufficiently high to excite several vibrational modes (harmonics) of the tablet. The tablet vibrational transient responses at a number of measurement points on the tablet are acquired by a laser vibrometer in a noncontact manner. An iterative computational procedure based on the finite element method is utilized to extract the Young’s modulus, the Poisson’s ratio, and the mass density values of each layer material of a bilayer tablet from a subset of the measured resonance frequencies. For verification purposes, a contact ultrasonic technique based on the time-of-flight data of the longitudinal (pressure) and transverse (shear) acoustic waves in each layer of a bilayer tablet is also utilized. The extracted mechanical properties from the air-coupled acoustic data agree well with those determined from the contact ultrasonic measurements. The mechanical properties of solid oral dosage forms have been shown to impact its mechanical integrity, disintegration profile and the release rate of the drug in the digestive tract, thus potentially affecting its therapeutic response. The presented nondestructive technique provides greater insight into the mechanical properties of the bilayer tablets and has the potential to identify quality and performance problems related to the mechanical properties of the bilayer tablets early on the production process and, consequently, reduce associated cost and material waste.
Similar content being viewed by others
References
Nangia A, Molloy T, Fahie BJ, Chopra SK. Novel regulated release system based on geometric configuration. Proc Int Sym Control Release of Bioactive Mater. 1995;22:294–5.
Chidambaram N, Porter W, Flood K, Qiu Y. Formulation and characterization of new layered diffusional matrices for zero-order sustained release. J Control Release. 1998;52:149–58.
Conte U, Maggi L, Columbo P, La Manna A. Multi-layered hydrophilic matrices as constant release devices (Geomatrix Systems). J Control Release. 1993;26:39–47.
Abdul S, Poddar SS. A flexible technology for modified release of drugs: multi layered tablets. J Control Release. 2004;97:393–405.
Wang CC, Tejwani MR, Roach WJ, Kay JL, Yoo J, Surprenant HL, et al. Development of near zero-order release dosage forms using three-dimensional printing (3-DP (TM)) technology. Drug Dev Ind Phar. 2006;32:367–76.
Wong PSL, Gupta SK, Stewart BE. Osmotically controlled tablets. In: Rathbone MJ, Hadgraft J, Roberts MS, editors. Modified-release drug delivery technology. London: Informa Healthcare; 2002. p. 101–14.
Zerbe HG, Krumme M. Smartrix sytem: design characteristics and release properties of a novel erosion-controlled oral delivery system. In: Rathbone MJ, Hadgraft J, Roberts MS, editors. Modified-release drug delivery technology. London: Informa Healthcare; 2002. p. 59–76.
Ozeki Y, Ando M, Watanabe Y, Danjo K. Evaluation of novel one-step dry-coated tablets as a platform for delayed-release tablets. J Control Release. 2004;95:51–60.
Charman SA, Charman WN. Oral modified-release delivery systems. In: Rathbone MJ, Hadgraft J, Roberts MS, editors. Modified-release drug delivery technology. London: Informa Healthcare; 2002. p. 1–19.
Mashadi AB, Newton JM. The characterization of the mechanical properties of microcrystalline cellulose: a fracture mechanics approach. J Pharm Pharmacol. 1987;39:961–5.
York P, Bassam F, Rowe RC, Roberts RJ. Fracture mechanics of microcrystalline cellulose powders. Int J Pharm. 1990;66:143–8.
Hancock BC, Clas SD, Christensen K. Micro-scale measurement of the mechanical properties of compressed pharmaceutical powders. 1: The elasticity and fracture behaviour of microcrystalline cellulose. Int J Pharm. 2000;209:27–35.
Podczeck F, Drake KR, Newton JM, Haririan I. The strength of bi-layered tablet. Eur J Pharm Sci. 2006;29:361–6.
U.S. Food and Drug Administration (FDA), New Release (P05-10, dated March 4, 2005) entitled U.S. marshals seize lots of GlaxoSmithKline’s Paxil CR and avandamet tablets because of continuing good manufacturing practice violations, http://www.fda.gov/bbs/topics/news/2005/NEW01162.html, (accessed 12/01/08).
Inman SJ, Briscoe BJ, Pitt KG. Topographic characterization of cellulose bi-layered tablets interfaces. Chem Eng Res Des. 2007;85:1005–12.
Hiestand ENE, Wells JE, Peot CB, Ochs JF. The physical process of tabletting. J Pharm Sci. 1977;66:510–8.
Hussain AS, Watts C, Afnan AM, Wu H. Foreword. J Proc Anal Tech. 2004;1:3–4.
Whitaker M, Baker GR, Westrup J, Goulding PA, Rudd DR, Belchamber RM, et al. Application of acoustic emission to the monitoring and end point determination of a high shear granulation process. Int J Pharm. 2000;205:79–91.
Serris E, Camby-Perier L, Thomas G, Desfontaines M, Fantozzi G. Acoustic emission of pharmaceutical powders during compaction. Powder Tech. 2002;128:296–9.
Varghese I, Cetinkaya C. Non-contact photo-acoustic defect detection in drug tablets. J Pharm Sci. 2007;96:2125–33.
Akseli I, Cetinkaya C. Drug tablet thickness estimations using air-coupled acoustics. Int J Pharm. 2008;351:165–73.
Akseli I, Cetinkaya C. Air-coupled non-contact mechanical property determination of drug tablets. Int J Pharm. 2008;359:25–34.
Akseli I, Mani GN, Cetinkaya C. Non-destructive acoustic defect detection in drug tablets. Int J Pharm. 2008;360:65–76.
Akseli I, Libordi C, Cetinkaya C. Real-time acoustic elastic property monitoring of compacts during compaction. J Pharm Innov. 2008;3:134–40.
Reich G. Near-infrared spectroscopy and imaging: basic principles and pharmaceutical applications. Adv Drug Deliver Rev. 2005;57:1109–43.
Lai CK, Zahari A, Miller B, Katstra WE, Cima MJ, Cooney CL. Nondestructive and on-line monitoring of tablets using light-induced fluorescence technology. AAPS PharmSciTech. 2004;5:1–10.
Zeitler JA, Shen YC, Baker C, Taday PF, Pepper M, Rades T. Analysis of coating structures and interfaces in solid oral dosage forms by three dimensional terahertz pulsed imaging. J Pharm Sci. 2007;96:330–40.
Mouget Y, Gosselin P, Tourigny M, Bechard S. Three-dimensional analyses of tablet content and film coating uniformity by laser-induced breakdown spectroscopy (LIBS). American Lab. 2003;2:20–2.
Wikstrom H, Romero-Torres S, Wongweragiat S, Williams JAS, Grant ER, Taylor LS. On-line content uniformity determination of tablets using low-resolution Raman spectroscopy. App Spectr. 2006;60:672–81.
Weller PJ. Cellulose, microcrystalline and lactose. In: Rowe RC, Sheskey PJ, Weller PJ, editors. Handbook of pharmaceutical excipients. 4th ed. Washington, DC: American Pharmaceutical Association, London: Pharmaceutical Press; 2003. p. 108–11.
Hancock BC, Colvin JT, Mullarney PM, Zinchuk AV. The relative densities of pharmaceutical powders, blends, dry granulations, and immediate-release tablets. Pharm Tech. 2003;27:64–80.
ABAQUS Theory Manual (2007). Version 6.7, Dassault Systèmes SIMULIA Corporation, pp. 2.4.1-1–2.4.1-7.
Roberts RJ, Rowe RC, York P. The Poisson’s ratio of microcrystalline cellulose. Int J Pharm. 1994;105:177–80.
Podczeck F. Particle–particle adhesion in pharmaceutical powder handling. London: Imperial College Press; 1998.
Nyström C, Malmquist K, Mazur J. Measurement of axial and radial tensile strength of tablets and their relation to capping. Acta Pharm Suec. 1978;15:226–32.
Mullarney PM, Hancock BC. Mechanical property anisotropy of pharmaceutical excipient compacts. Int J Pharm. 2006;314:9–14.
ACKNOWLEDGMENTS
The authors thank Drs. Dominic A. Ventura and Douglas Becker for stimulating discussions and feedback, and acknowledge the Consortium for the Advancement of Manufacturing of Pharmaceuticals (CAMP) and OYSTAR Manesty Ltd (UK) for their partial funding for this investigation. The sample tablets used in the current study were provided by OYSTAR Manesty. The interferometric equipment employed was acquired through a grant from the National Science Foundation (Nanoscale Exploratory Research Program, Award ID 0210242).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Akseli, I., Dey, D. & Cetinkaya, C. Mechanical Property Characterization of Bilayered Tablets using Nondestructive Air-Coupled Acoustics. AAPS PharmSciTech 11, 90–102 (2010). https://doi.org/10.1208/s12249-009-9352-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1208/s12249-009-9352-9