Skip to main content
SpringerLink
Log in

One-Pot Synthesis of Polymer-Aluminosilicate Coating Materials from Heterogeneous Polymer Blends

  • COMPOSITES
  • Published:
Polymer Science, Series A Aims and scope Submit manuscript

Abstract

The possibility of using one-pot melt blending for the synthesis of polymer-aluminosilicate nanocomposites from heterogeneous polymer blends is studied. The polyolefin composition containing recycled polyethylene and designed for the anticorrosion protection of pipelines is used as a polymer matrix. The advisability of using one-pot blending procedure for the synthesis of composites from polymers processed by extrusion is substantiated. Formation of the intercalated structure of the nanocomposite in the system under consideration is verified experimentally. The nanostructure of an organoclay in the composites obtained by the conventional method (polymer blending with organoclay) and the one-pot procedure (polymer blending with natural clay and organomodifier) is found to be almost the same. It is shown that the physicomechanical characteristics of the nanocomposites synthesized by different methods are also similar. Resistance of organoclay structure formed in the polymer composite against sodium chloride aqueous solution is investigated by X-ray diffraction. It is revealed that the structure of the nanocomposites obtained by different methods remains almost unchanged during their swelling in water and subsequent drying which provides evidence that modification of the clay during blending with the polymer matrix is complete and the composite does not contain nonmodified clay swelling in water.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.

Similar content being viewed by others

REFERENCES

  1. S. Fu, Z. Sun, P. Huang, Y. Li, and N. Hu, Nano Mater. Sci. 1 (1), 2 (2019).

    Google Scholar 

  2. S. Clifton, B. H. S. Thimmappa, R. Selvam, and B. Shivamurthy, Compos. Commun. 17, 72 (2020).

    Article  Google Scholar 

  3. H. Salam, Y. Dong, and I. Davies, in Fillers and Reinforcements for Advanced Nanocomposites (Elsevier, 2015), p. 101.

    Google Scholar 

  4. F. Ali, H. Ullah, Z. Ali, F. Rahim, F. Khan, and Z. U. Rehman, Curr. Nanomater. 1 (2), 83 (2016).

    Article  CAS  Google Scholar 

  5. C. F. Dai, P. R. Li, and J. M. Yeh, Eur. Polym. J. 44 (8), 2439 (2008).

    Article  CAS  Google Scholar 

  6. F. Malin, B. Znoj, U. Šegedin, S. Skale, J. Golob, and P. Venturini, Prog. Org. Coat. 76 (10), 1471 (2013).

    Article  CAS  Google Scholar 

  7. R. Moya, A. Rodriguez-Zúñiga, J. Vega-Baudrit, and V. Alvarez, Int. J. Adhes. Adhes. 59, 62 (2015).

    Article  CAS  Google Scholar 

  8. Y. X. Guo, J. H. Liu, W. P. Gates, and C. H. Zhou, Clays Clay Miner. 68 (6), 601 (2020).

    Article  CAS  Google Scholar 

  9. B. Chen, J. R. Evans, H. C. Greenwell, P. Boulet, P. V. Coveney, A. A. Bowden, and A. Whiting, Chem. Soc. Rev. 37 (3), 568 (2008).

    Article  Google Scholar 

  10. P. Panupakorn, E. Chaichana, P. Praserthdam, and B. Jongsomjit, J. Nanomater. 2013, Art. ID 154874 (2013).

  11. F. Yang, M. Manitiu, R. Kriegel, and R. M. Kannan, Polymer 55 (16), 3915 (2014).

    Article  CAS  Google Scholar 

  12. O. Zabihi, M. Ahmadi, S. Nikafshar, K. C. Preyeswary, and M. Naebe, Composites, Part B 135, 1 (2018).

    Article  CAS  Google Scholar 

  13. V. V. Kurenkov, V. A. Gerasin, Yu. M. Korolev, A. A. Piryazev, D. I. Mendeleev, and S. V. D’yachuk, Plast. Massy, Nos. 7−8, 53 (2015).

  14. L. Wu, Y. Wang, L. Yang, Q. Wang, and C. Xu, Adv. Mater. Sci. Eng. 2019, Art. ID 2989254 (2019).

  15. F. Gholinezhad, M. R. Moghbeli, A. Aghaei, and A. Allahverdi, J. Dispersion Sci. Technol. 42 (3), 416 (2021).

    CAS  Google Scholar 

  16. S. I. S. Shahabadi and H. Garmabi, eXPRESS Polym. Lett. 6 (8), 657 (2012).

    Article  CAS  Google Scholar 

  17. S. Intasa-Ard, K. Imwiset, S. Bureekaew, and M. Ogawa, Dalton Trans. 47, 2896 (2018).

    Article  CAS  Google Scholar 

  18. E. M. Khar’kova, D. I. Mendeleev, I. S. Levin, S. E. Sorokin, and V. A. Gerasin, Appl. Clay Sci. 195, Art. ID 105734 (2020).

  19. M. Alexandre, G. Beyer, C. Henrist, R. Cloots, A. Rulmont, R. Jerome, and P. Dubois, Macromol. Rapid Commun. 22 (8), 643 (2001).

    Article  CAS  Google Scholar 

  20. Y. Tang, Y. Hu, B. Li, L. Liu, Z. Wang, Z. Chen, and W. Fan, J. Polym. Sci., Part A: Polym. Chem. 42 (23), 6163 (2004).

    Article  CAS  Google Scholar 

  21. B. F. Ports and R. A. Weiss, Ind. Eng. Chem. Res. 49 (23), 11896 (2010).

    Article  CAS  Google Scholar 

  22. V. A. Gerasin, M. A. Guseva, P. D. Komarov, V. V. Kurenkov, M. E. Minyaev, and I. E. Nifant’ev, Polym. Sci., Ser. A 62 (6), 691 (2020).

    Article  CAS  Google Scholar 

  23. Y. H. Niu and Z. G. Wang, Macromolecules 39 (12), 4175 (2006).

    Article  CAS  Google Scholar 

Download references

ACKNOWLEDGMENTS

We are grateful to S.V. D’yachuk (OOO Russkii polimer) for supplying us with the material for studies and valuable discussion.

Funding

This work was performed within the framework of the State Assignment for the Topchiev Institute of Petrochemical Synthesis, Russian Academy of Sciences using equipment of the Shared Research Center Analytical Center of Deep Oil Processing and Petrochemistry, Topchiev Institute of Petrochemical Synthesis, Russian Academy of Sciences.

Author information

Authors and Affiliations

  1. Topchiev Institute of Petrochemical Synthesis, Russian Academy of Sciences, 119991, Moscow, Russia

    V. V. Kurenkov, M. A. Guseva, I. S. Levin & V. A. Gerasin

Authors
  1. V. V. Kurenkov
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. M. A. Guseva
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. I. S. Levin
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. V. A. Gerasin
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to V. A. Gerasin.

Ethics declarations

The authors declare that they have no conflicts of interest.

Additional information

Translated by T. Soboleva

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kurenkov, V.V., Guseva, M.A., Levin, I.S. et al. One-Pot Synthesis of Polymer-Aluminosilicate Coating Materials from Heterogeneous Polymer Blends. Polym. Sci. Ser. A 64, 318–325 (2022). https://doi.org/10.1134/S0965545X22700109

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S0965545X22700109

Search

Navigation