Abstract
The influence of the fraction of the powdered waxy material to be compacted and the holding time under load on the residual stresses and the elastic response of the compacts is studied. The elastic response is experimentally found to be minimal in the compacts with a porosity of 7–12% at residual stresses less than 0.02 MPa in the compacted material.
Similar content being viewed by others
REFERENCES
Investment Casting, Ed. by V. A. Ozerov, 4th ed. (Mashinostroenie, Moscow, 1994).
S. G. Zhilin, O. N. Komarov, A. A. Sosnin, and V. V. Predein, “Formation of castings of an increased dimensional accuracy using combined foundry patterns made from aluminothermal and waxy mixtures,” Zagot. Proizv. Mashinostr, No. 11, 6–11 (2016).
N. R. Prokopchuk, N. D. Gorshcharik, A. Yu. Klyuev, N. G. Kozlov, E. I. Rozhkova, and I. A. Latyshevich, “Possibility of using modified rosin in model compositions for precision casting,” Trudy BGTU, No. 4, 106–118 (2012).
S. G. Zhilin, O. N. Komarov, A. A. Sosnin, and G. L. Panchenko, “Method of manufacturing investment pattern,” RF Patent 2632051, 2017.
S. G. Zhilin, I. G. Sapchenko, and O. N. Komarov, “Elastic response of compacts during the deformation of heterogeneous powder materials,” Vestn. ChGPU, Ser. Mekh. Predel. Sost., No. 4, 163–168 (2015).
S. G. Zhilin, O. N. Komarov, and A. A. Sosnin, “Modeling of metal forming processes by estimating the stress-strain state of compacts of polymer model compositions using the finite element method,” Vestn. PNIPU. Mashinoctr. Materialoved. 19 (2), 48–66 (2017).
Modeling of Powder Die Compaction, Ed. by P. R. Brewin, O. Coube, P. Doremus, and J. H. Tweed (Springer, London, 2008).
V. M. Gorokhov, O. V. Mikhailov, M. B. Stern, and A. F. Il’yushchenko, “Influence of the scheme of warm pressing on the distribution of the final properties of powder products of complex shape,” Nauk. Notatki, No. 29, 59–64 (2010).
T. V. Rozhkova, V. N. Kuskov, and N. I. Smolin, “Investigation of the influence of interparticle contacts on the process of preliminary pressing of powder material,” Agroprod. Politika Rossii, No. 11 (71), 140–144 (2017).
G. A. Pribytkov, V. V. Korzhova, and E. N. Korosteleva, “Strength properties and fracture characteristics of Al–Cr and Al–Cr–Si composites formed by hot compaction of powder mixtures,” Deform. Razrushenie Mater., No. 8, 13–20 (2013).
V. V. Rybin, Severe Plastic Deformation and Fracture of Metals (Metallurgiya, Moscow, 1986).
D. Gruber, H. Harmut, and A. Mikhelich, “Finite element calculation of the state of stress in refractory injectors during pressing,” Ogeup. Tekh. Keram., No. 4, 5, 66–69 (2013).
T. A. Gruznova, V. I. Krivolapov, and I. I. Mikryukov, “Method of pressing plastic and viscoelastic materials in a hydropress mold and a hydropress for their pressing,” RF Patent 2042524, 1995.
A. A. Burenin, “Elastic response of a medium during development, stop, and repeated viscoplastic flow, including instantaneous unloading,” Vestn. Nizheg. Univ., No. 4, 5, 2043–2044 (2011).
V. N. Tsemenko, D. V. Fuk, and S. V. Ganin, “Determination of rheological characteristics and modeling of the extrusion of powder and porous materials. Part 1. Powder body,” Nauch.-Tekh. Ved. SPbGPU 243 (2), 124–133 (2016).
G. A. Libenson, V. Yu. Lopatin, and G. V. Komarnitskii, Powder Metallurgy Processes. Vol. 2. Molding and Sintering (MISiS, Moscow, 2002).
ACKNOWLEDGMENTS
We thank D.A. Potyanikhin for his participation in the work.
Funding
The work was carried out in terms of state assignment no. 075-00414-19-00 to the Khabarovsk Federal Research Center, Far East Branch, Russian Academy of Sciences.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by K. Shakhlevich
Rights and permissions
About this article
Cite this article
Zhilin, S.G., Bogdanova, N.A., Komarov, O.N. et al. Decrease in the Elastic Response in Compacting a Paraffin–Stearin Powder Composition. Russ. Metall. 2021, 459–463 (2021). https://doi.org/10.1134/S0036029521040376
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029521040376