Abstract
The structure and mechanical properties of 09G2S steel are studied during uniaxial tension tests in the temperature range from room temperature to 1200°C. The temperatures above which the strength properties of the steel decrease are determined. Austenite grain growth is shown to be very weak in the temperature range from room temperature to 1000°C.
Similar content being viewed by others
REFERENCES
Grades of Steels and Alloys, Ed. by A. S. Zubchenko (Mashinostroenie, Moscow, 2003).
C.-C. Yang and C.-L. Liu, “Improvement of the mechanical properties of 1022 carbon steel coil by using the Taguchi method to optimize spheroidized annealing conditions,” Materials 9, 693 (2016).
G. P. Fetisov and F. A. Garifullin, Materials Science and Technology of Metals (Oniks, Moscow, 2007).
L. S. Livshits and A. N. Khakimov, Metal Science of Welding and Heat Treatment of Welded Joints (Mashinostroenie, Moscow, 1989).
Yu. N. Saraev, V. P. Bezborodov, S. V. Gladkovskii, and N. I. Golikov, “Investigation of the properties of the welded joints of manganese steel formed by low-frequency pulse-arc welding,” Deform. Razrushenie Mater., No. 4, 36–41 (2016).
Yu. V. Poletaev and V. Yu. Poletaev, “Single-pass electric arc welding under a thin slag layer of thick-sheet steel 09G2S structures,” Vestn. Don. Gos. Tekh. Univ. 18 (1), 50–58 (2018).
S. A. Faramazov, Equipment of Oil Refineries and Its Operation: Textbook for Colleges (Khimiya, Moscow, 1984).
P. D. Odesskii and I. I. Vedyakov, Steel in Building Metallic Structures (Metallurgizdat, Moscow, 2018).
S. A. Nikulin, S. O. Rogachev, S. G. Vasil’ev, V. A. Belov, V. Yu. Turilina, and Yu. A. Nikolaev, “Influence of high temperatures on the mechanical properties of 22K steel,” Deform. Razrushenie Mater., No. 5, 22–26 (2020).
V. Loktionov, I. Lyubashevskaya, O. Sosnin, and E. Terent’ev, “Short-term strength properties and features of high-temperature deformation of VVER reactor pressure vessel steel 15Kh2NMFA-A within the temperature range 20–1200°C,” Nucl. Eng. Des. 352, 110188 (2019).
S. S. Gorelik, S. V. Dobatkin, and L. M. Kaputkina, Recrystallization of Metals and Alloys (MISiS, Moscow, 2005).
V. D. Loktionov, O. V. Sosnin, and I. V. Lyubashevskaya, “Strength properties and idiosyncrasies of the deformational behavior of 15Kh2NMFA-A steel at temperatures 20–1100°C,” At. Energ. 99 (3), 665–669 (2005).
ACKNOWLEDGMENTS
We thank A. Sedykh for her assistance in conducting the metallographic studies.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by K. Shakhlevich
Rights and permissions
About this article
Cite this article
Nikulin, S.A., Rogachev, S.O., Vasil’ev, S.G. et al. Effect of High Temperatures on the Mechanical Properties of 09G2S Steel. Russ. Metall. 2021, 492–495 (2021). https://doi.org/10.1134/S003602952104025X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S003602952104025X