Skip to main content
Log in

Tribological and mechanical properties of nanostructured solid lubricant W-Se-C coatings produced by laser deposition

  • Physico-Chemical Principles of Materials Development
  • Published:
Inorganic Materials: Applied Research Aims and scope

Abstract

The method of pulsed laser deposition was used to produce thin film coatings from tungsten diselenide and carbon. Pulsed laser deposition enables the formation of a nanocomposite structure, which contains nanocrystals of WSe2, amorphous carbon, and ball-shaped β-W nanoparticles with the WSe2 nanoshell. Friction, wear, and mechanical properties of the coatings depend on the carbon concentration. The increase in the carbon concentration resulted in the improvement of wear resistance and mechanical properties but noticeably deteriorated antifriction properties. The wear dynamics was investigated and it was established that nanostructure-based features of the coatings became apparent during friction on a hard underlayer of diamond-like carbon. A thin composite W-Se-C layer ensured prolonged friction with a low coefficient of friction and with very low wear. This tribological behavior may be attributed to the rotation of encapsulated nanoballs located in the contact region of the friction pair.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Holbery, J.D., Pflueger, E., Savan, A., Gerbig, Y., Luo, Q., Lewis, D.B., and Munz, W.-D., Alloying MoS2 with Al and Au: Structure and Tribological Performance, Surf. Coat. Technol., 2003, vols. 169–170, pp. 716–720.

    Article  Google Scholar 

  2. Savan, A., Simmonds, M.C., Huang, Y., Constable, C.P., Creasey, S., Gerbig, Y., Haefke, H., and Lewis, D.B., Effects of Temperature on the Chemistry and Tribology of Co-Sputtered MoSx-Ti Composite Thin Films, Thin Solid Films, 2005, svol. 489, pp. 137–144.

    Article  CAS  Google Scholar 

  3. Basnyat, P., Luster, B., Muratore, C., Voevodin, A.A., Haasch, R., Zakeri, R., Kohli, P., and Aouadi, S.M., Surface Texturing for Adaptive Solid Lubrication, Surf. Coat. Technol., 2008, vol. 203, pp. 73–79.

    Article  CAS  Google Scholar 

  4. Fominskii, V.Yu., Romanov, R.I., and Kiselev, G.A., Tribological Properties of Solid Lubricating Coatings Based on the Alloyed Tungsten Diselenide, Uprochnyayushchie Tekhnologii Pokrytiya, 2006, No. 10, pp. 38–44.

  5. Aouadi, S.M., Paudel, Y., Simonson, W.J., Ge, Q., Kohli, P., Muratore, C., and Voevodin, A.A., Tribological Investigation of Adaptive Mo2N/MoS2/Ag Coatings with High Sulfur Content, Surf. Coat. Technol., 2009, vol. 203, pp. 1304–1309.

    Article  CAS  Google Scholar 

  6. Noshiro, J., Watanabe, S., Sakurai, T., and Miyake, S., Friction Properties of Co-Sputtered Sulfide/DLC Solid Lubricating Films, Surf. Coat. Technol., 2006, vol. 200, pp. 5849–5854.

    Article  CAS  Google Scholar 

  7. Polcar, T., Evaristo, M., and Cavaleir, A., Comparative Study of the Tribological Behavior of Self-Lubricating W-Se-C and Mo-Se-C Sputtered Coatings, Wear, 2009, vol. 266, pp. 388–392.

    Article  CAS  Google Scholar 

  8. Polcar, T., Evaristo, M., Stueber, M., and Cavaleir, A., Mechanical and Tribological Properties of Sputtered Mo-Se-C Coatings, Wear, 2009, vol. 266, pp. 393–397.

    Article  CAS  Google Scholar 

  9. Koch, T., Evaristo, M., Pauschitz, A., and Roy, M., Nanoindentation and Nanoscratch Behavior of Reactive Sputtered Deposited W-S-C Film, Thin Solid Films, 2009, vol. 518, pp. 185–193.

    Article  CAS  Google Scholar 

  10. Tomala, A., Roy, M., and Franek, F., Nanotribology of Mo-Se-C Films, Philos. Mag., 2010, vol. 90, pp. 3827–3843.

    Article  CAS  Google Scholar 

  11. Holmberg, K., Ronkainen, H., Laukkanen, A., and Wallin, K., Friction and Wear of Coated Surfaces-Scales, Modeling and Simulation of Tribomechanisms, Surf. Coat. Technol., 2007, vol. 202, pp. 1034–1049.

    Article  CAS  Google Scholar 

  12. Muratore, C. and Voevodin, A.A., Control of Molybdenum Disulfide Basal Plane Orientation during Coating Growth in Pulsed Magnetron Sputtering Discharges, Thin Solid Films, 2009, vol. 517, pp. 5605–5610.

    Article  CAS  Google Scholar 

  13. Nevolin, V.N., Fominskii, V.Yu., Smirnov, A.L., and Koveshnikov, A.V., Peculiarities of Laser Torch Throwout and MoSx Film Formation at Pulsed Laser Deposition in Buffer Gas, Perspekt. Mater., 2001, No. 1, pp. 82–86.

  14. Hu, J.J., Bultman, J.E., Muratore, C., Phillips, B.S., Zabinski, J.S., and Voevodin, A.A., Tribological Properties of Pulsed Laser Deposited Mo-S-Te Composite Films at Moderate High Temperatures, Surf. Coat. Technol., 2009, vol. 203, pp. 2322–2327.

    Article  CAS  Google Scholar 

  15. Fominskii, V.Yu., Romanov, R.I., Gnedovets, A.G., and Nevolin, V.N., Formation of the Chemical Composition of Transition Metal Dichalcogenide Thin Films at Pulsed Laser Deposition, Techn. Phys., 2010, vol. 55, no. 10, pp. 1509–1516.

    Article  Google Scholar 

  16. Fominski, V.Yu., Romanov, R.I., Gusarov, A.V., and Celis, J.-P., Pulsed Laser Deposition of Antifriction Thin-Film MoSex Coatings at the Different Vacuum Conditions, Surf. Coat. Technol., 2007, vol. 201, pp. 7813–7821.

    Article  CAS  Google Scholar 

  17. Nevolin, V.N., Fominskii, V.Yu., Romanov, R.I., and Kiselev, G.A., Tribological Properties Diamond-Like Carbon Coatings Formed on Steel by Ion-Assisted Deposition from Pulsed Laser Plasma, Uprochnyayushchie Tekhnologii Pokrytiya, 2006, No. 6, pp. 34–40.

  18. Nevolin, V.N., Romanov, R.I., Smirnov, A.L., Smirnov, N.I., and Fominskii, V.Yu., Tribological Properties and Sinergetic Effect of Two-Layered WSex(Ni)/a-C Coating, Perspekt. Mater., 2003, No. 5, pp. 70–77.

  19. Fominski, V.Yu., Nevolin, V.N., Romanov, R.I., Titov, V.I., and Scharff, W., Tribological Properties of Pulsed Laser Deposited WSex(Ni)/DLC Coatings, Tribology Lett., 2004, vol. 17, pp. 289–294.

    Article  CAS  Google Scholar 

  20. Walck, S.D., Zabinski, J.S., Donley, M.S., and Bultman, J.E., Evolution of Surface Topography in Pulsed-Laser-Deposited Thin Films of MoS2, Surf. Coat. Technol., 1993, vol. 62, pp. 412–416.

    Article  CAS  Google Scholar 

  21. Voevodin, A.A., O’Neill J.P., and Zabinski J.S. Tribological Performance and Tribochemistry of Nanocrystalline WC/Amorphous Diamond-Like Carbon Composites, Thin Solid Films, 1999, vol. 342, pp. 194–200.

    Article  CAS  Google Scholar 

  22. Ferrari, A.C. and Robertson, J., Raman Spectroscopy of Amorphous, Nanostructured, Diamond-Like Carbon, and Nanodiamond, Phil. Trans. R. Soc. Lond. A, 2004, vol. 362, pp. 2477–2512.

    Article  CAS  Google Scholar 

  23. Evaristo, M., Polcar, T., and Cavaleiro, A., Synthesis and Properties of W-Se-C Coatings Deposited by PVD in Reactive and Non-Reactive Processes, Vacuum, 2009, vol. 83, pp. 1262–1265.

    Article  CAS  Google Scholar 

  24. Evaristo, M., Polcar, T., and Cavaleiro, A., Can W-Se-C Coatings Be Competitive to W-S-C Ones?, Plasma Process. Polym., 2009, vol. 6, pp. S92–S95.

    Article  CAS  Google Scholar 

  25. Zhu, X., Lauwerens, W., Cosemans, P., Van Stappen, M., Celis, J.P., Stals, L.M., and He, J., Different Tribological Behavior of MoS2 Coatings under Fretting and Pin-on-Disk Conditions, Surf. Coat. Technol., 2003, vol. 163-164, pp. 422–428.

    Article  CAS  Google Scholar 

  26. Voevodin, A.A., Jones, J.G., Back, T.C., Zabinski, J.S., Strel’nitzki, V.E., and Aksenov, I.I., Comparative Study of Wear-Resistant DLC and Fullerene-Like CNx Coatings Produced by Pulsed Laser and Filtered Cathodic Arc Depositions, Surf. Coat. Technol., 2005, vol. 197, pp. 116–125.

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to S. N. Grigoriev.

Additional information

Original Russian Text © S.N. Grigoriev, V.Yu. Fominskii, R.I. Romanov, V.N. Nevolin, 2012, published in Perspektivnye Materialy, 2012, No. 2, pp. 5–14.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Grigoriev, S.N., Fominskii, V.Y., Romanov, R.I. et al. Tribological and mechanical properties of nanostructured solid lubricant W-Se-C coatings produced by laser deposition. Inorg. Mater. Appl. Res. 3, 347–355 (2012). https://doi.org/10.1134/S207511331205005X

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S207511331205005X

Keywords

Navigation