Abstract
This paper presents the structural design and optimization process of a morphing wing trailing edge (TE) flap. The flap consists of flexible upper and lower skins and various connections that constrains the relative motion between the upper and lower skins, and is actuated by an eccentric beam to which several discs of variable radii and setting angles with respect to the beam is rigidly attached. The focus of this work is to find the optimal parameters for the eccentric beam and the connections so that the upper and lower skins bend to the desired shapes and their deformation process is continuous. To achieve this goal, a computer design tool that makes synthetic use of MATLAB, Python and ABAQUS is developed. Specifically, the shape of the eccentric beam, the number, locations, shapes and orientations of the discs, and the number and locations of the connections are calculated according to the target shapes of the morphing flap in MATLAB. These parameters are passed to a Python script that automatically generates the finite element (FE) model of the morphing TE flap assembly for ABAQUS. The FE model is then simulated in ABAQUS and the needed results are extracted by the Python script and passed back to the main MATLAB code, in which a particle swarm optimization is used to find the set of parameters that lead to the optimal bent shape of the upper and lower skins. The results showed that the proposed design process is robust and able to achieve the desired morphed continuously shape of the TE flap.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Li G (2017) Design and optimization of camber continuously morphing wing mechanism with multiple joints. PhD thesis, Harbin Institute of Technology
Huang J, Ge W (2010) Advanced and key techniques in the adaptive wing. Aero Weapon 2010(2):8–12
Di Matteo N, Guo S, Ahmed S, Li D (2010) Design and analysis of a morphing flap structure for high lift wing. In: 51st AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference 2010, Orlando, Florida, pp 12–21
Ricci S, Scotti A, Terraneo M (2006) Design, manufacturing and preliminary test results of an adaptive wing camber model. In: 48th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and material conference 2006, Newport, Rhode Island, pp 1–12
Voracek D, Pendleton E, Reichenbach E, Griffin K, Welch L (2003) The active aeroelastic wing phase I flight research through January 2003. In: NASA/TM 2003, NASA, Edwards, California, pp 14–22
Kuzmina S, Amiryants G, Schweiger J, Cooper J, Amprikidis M, Sensberg O (2002) Review and outlook on active and passive aeroelastic design concepts for future aircraft. In: ICAS Congress 2002, pp 1–10
Bae JS, Seigler TM, Inman DJ, Lee I (2004) Aerodynamic and aeroelastic considerations of a variable-span morphing wing. In: 45th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference 2004, Palm Springs, California, pp 1–9
Di Matteo N, Guo S, Li D (2011) Morphing trailing edge flap for high lift wing. In: 52nd AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference 2011, Denver, Colorado, pp 4–17
Perera M, Guo S (2009) Optimal design of an aeroelastic wing structure with seamless control surface. Inst Mech Eng Proc 5(8):1141–1150
Perera M, Guo S (2009) Optimal design of a seamless aeroelastic wing structure. In: 50th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics & materials conference 2009, Palm Springs, California, pp 10–18
Vos R, Hodigere-Siddaramaiah V, Cooper J (2007) Aeroelastic flight control for subscale UAVs. In: 48th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference 2007, Honolulu, Hawaii, pp 1–12
Gilbert WW (1981) Mission adaptive wing system for tactical aircraft. J Aircr 18(7):597–602
Monner HP (2001) Realization of an optimized wing camber by using form variable flap structures. Aerosp Sci Technol 5(7):445–455
Moored KW, Bart-Smith H (2007) The analysis of tensegrity structures for the design of a morphing wing. J Appl Mech 74(4):668–676
Kudva JN, Martin CA, Scherer LB, Jardine AP, McGowan AR, Lake RC, Sendeckyj G, Sanders B (1999) Overview of the DARPA/AFRL/NASA smart wing program. SPIE Proc 21(3):57–66
Cho JDB, Wang DP, Martin CA, Kudva JN, West MN (2004) Development of high-rate, adaptive trailing edge control surface for the smart wing phase 2 wind tunnel model. J Intell Mater Syst Struct 15(4):279–291
Musgrove RG (1981) Eccentric actuator. United States Patent 4,286,761
Musgrove RG (1976) Apparatus for producing pivotal movement. United States Patent 3,944,170
Ghandi F, Anusonti-Inthra P (2008) Skin design studies for variable camber morphing airfoils. Smart Mater Struct 17(1):1–8
Lind R, Abdulrahim M, Boothe K, Ifju P (2008) Morphing for flight control of micro air vehicles. In: 12nd European micro air vehicle conference 2008, pp 1–11
Morishima R, Guo S, Di Matteo N, Ahmed S (2009) A composite wing structure with morphing leading edge and flap. In: 17th ICCE conference 2009, Hawaii, US, pp 13–22
Austin F, Nostrand WCV, Rossi MJ (1993) Shape control of structures with semi-definite stiffness matrices for adaptive wings. Smart Struct Mater 1917(1):419–425
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ding, S., Zhou, X. Structural design and optimization of a morphing wing trailing edge flap. AS 1, 109–119 (2018). https://doi.org/10.1007/s42401-018-0008-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42401-018-0008-x