The presence of gas hydrates in sediments affects the interaction between hydrate and sediment particles, which is associated with the most fundamental aspect of the mechanical behavior of hydrate-bearing sediments (HBS). The discrete element models of HBS with pore-filling, cementing, and load-bearing hydrates are proposed. In addition, homogeneous and heterogeneous distribution modes of hydrates are considered for the three hydrate morphologies. A series of triaxial compression test simulations are carried out to investigate the influences of hydrate morphology and hydrate distribution heterogeneity on the mechanical properties of hydrate-bearing sediments. The simulation results reveal that hydrate morphology can significantly while hydrate distribution heterogeneity can slightly affect the macro and micromechanical properties. Heterogeneous HBS shows a larger shear strength than homogeneous HBS. The cementing type of HBS exhibits the largest mid-strain modulus among the three hydrate morphologies. Sediment-sediment contacts contribute the most, while hydrate-hydrate contacts contribute the least to the shear strength regardless of hydrate morphology and hydrate distribution heterogeneity. It is also found that the cracks that occurred in HBS specimens depend on hydrate morphology and distribution heterogeneity. These findings are helpful to establish an accurate constitutive model for the HBS with a complex distribution of hydrates.
AbstractSection Article Highlights-
Hydrate morphology significantly affects the mechanical properties of hydrate-bearing sediments.
-
Heterogeneous hydrate-bearing sediments exhibit a larger shear strength than homogeneous ones.
-
Sediment-sediment contacts primarily contribute to the shear strength of hydratebearing sediments.
References
Brugada J, Cheng Y, Soga K, Santamarina J (2010) Discrete element modelling of geomechanical behaviour of methane hydrate soils with pore-filling hydrate distribution. Granular Matter 12:517–525
Chaouachi M, Falenty A, Sell K, Enzmann F, Kersten M, Haberthür D, Kuhs WF (2015) Microstructural evolution of gas hydrates in sedimentary matrices observed with synchrotron X-ray computed tomographic microscopy. Geochem Geophys Geosyst 16:1711–1722
Cheng Y, Nakata Y, Bolton MD (2003) Discrete element simulation of crushable soil. Geotechnique 53:633–641
Cheng Y, Yu Y, Xu X, Soga K (2015) Shape effect of elongated soil particles on Discrete Element Modelling of methane hydrate soil sediments Geomechanics from Micro to Macro. CRC Press, Boca Raton
Ciantia MO, Arroyo M, O’Sullivan C, Gens A (2019) Micromechanical inspection of incremental behaviour of crushable soils. Acta Geotech 14:1337–1356
Cohen E, Klar A (2019) A cohesionless micromechanical model for gas hydrate-bearing sediments. Granular Matter 21:36
da Cruz F, Emam S, Prochnow M, Roux JN, Chevoir F (2005) Rheophysics of dense granular materials: Discrete simulation of plane shear flows. Phys Rev E 72:021309
Dai S, Santamarina JC, Waite WF, Kneafsey TJ (2012) Hydrate morphology: Physical properties of sands with patchy hydrate saturation. J Geophys Res Solid Earth 117
de Frias Lopez R, Silfwerbrand J, Jelagin D, Birgisson B (2016) Force transmission and soil fabric of binary granular mixtures. Géotechnique 66:578–583
Goldenberg C, Goldhirsch I (2005) Friction enhances elasticity in granular solids. Nature 435:188–191
He J, Li X, Chen Z, Li Q, Zhang Y, Wang Y, You C (2020) Study on methane hydrate distributions in laboratory samples by electrical resistance characteristics during hydrate formation. J Natural Gas Sci Eng 80:103385
Hyodo M, Li Y, Yoneda J, Nakata Y, Yoshimoto N, Nishimura A, Song Y (2013a) Mechanical behavior of gas-saturated methane hydrate-bearing sediments. J Geophys Res Solid Earth 118:5185–5194
Hyodo M, Yoneda J, Yoshimoto N, Nakata Y (2013b) Mechanical and dissociation properties of methane hydrate-bearing sand in deep seabed. Soils Found 53:299–314
Itasca (2015) Particle Flow Code: User's Manual, Version 5.0. Itasca Consulting Group, Minneapolis, USA
Jiang M, Liu J, Shen Z (2019) DEM simulation of grain-coating type methane hydrate bearing sediments along various stress paths. Eng Geol 261:105280
Jiang M, Peng D, Ooi JY (2017) DEM investigation of mechanical behavior and strain localization of methane hydrate bearing sediments with different temperatures and water pressures. Eng Geol 223:92–109
Jiang M, Sun R, Arroyo M, Du W (2021) Salinity effects on the mechanical behaviour of methane hydrate bearing sediments: A DEM investigation. Comput Geotech 133:104067
Jung JW, Santamarina JC, Soga K (2012) Stress‐strain response of hydrate‐bearing sands: Numerical study using discrete element method simulations. J Geophys Res Solid Earth 117
Ke W, Svartaas TM, Chen D (2019) A review of gas hydrate nucleation theories and growth models. J Natural Gas Sci Eng 61:169–196
Lei L, Seol Y, Choi J-H, Kneafsey TJ (2019) Pore habit of methane hydrate and its evolution in sediment matrix-Laboratory visualization with phase-contrast micro-CT. Mar Pet Geol 104:451–467
Li J, Ye J, Qin X, Qiu H, Wu N, Lu H, Xie W, Lu J, Peng F, Xu Z, Lu C, Kuang Z, Wei J, Liang Q, Lu H, Kou B (2018) The first offshore natural gas hydrate production test in South China Sea. China Geology 1:5–16
Liu T, Liu X, Zhu T (2020) Joint analysis of P-wave velocity and resistivity for morphology identification and quantification of gas hydrate. Mar Pet Geol 112:104036
Makogon YF (2010) Natural gas hydrates–A promising source of energy. J Natural Gas Sci Eng 2:49–59
Masui A, Haneda H, Ogata Y, Aoki K (2005) Effects of methane hydrate formation on shear strength of synthetic methane hydrate sediments, The Fifteenth International Offshore and Polar Engineering Conference. International Society of Offshore and Polar Engineers, Seoul, Korea, pp. 364–369.
Matsumoto R, Tomaru H, Lu H (2004) Detection and evaluation of gas hydrates in the eastern Nankai Trough by geochemical and geophysical methods. Resour Geol 54:53–67
Minh N, Cheng Y, Thornton C (2014) Strong force networks in granular mixtures. Granular Matter 16:69–78
Sánchez M, Gai X, Santamarina JC (2017) A constitutive mechanical model for gas hydrate bearing sediments incorporating inelastic mechanisms. Comput Geotech 84:28–46
Shen Z, Jiang M (2016) DEM simulation of bonded granular material. Part II: extension to grain-coating type methane hydrate bearing sand. Comput Geotech 75:225–243
Sloan ED (2003) Fundamental principles and applications of natural gas hydrates. Nature 426:353
Thornton C (2000) Numerical simulations of deviatoric shear deformation of granular media. Géotechnique 50:43–53
Timco GW, Weeks WF (2010) A review of the engineering properties of sea ice. Cold Reg Sci Technol 60:107–129
Vinod JHyodo M, Indraratna B, Kajiyama S (2014) Shear behaviour of methane hydrate bearing sand: DEM simulations. In: International symposium on geomechanics from micro to Macro, IS-Cambridge, pp 355–359
Wu P, Li Y, Liu W, Sun X, Kong X, Song Y (2020) Cementation failure behavior of consolidated gas hydrate-bearing sand. J Geophys Res Solid Earth
Yamamoto K, Terao Y, Fujii T, Ikawa T, Seki M, Matsuzawa M, Kanno T (2014) Operational overview of the first offshore production test of methane hydrates in the Eastern Nankai Trough, Offshore Technology Conference. OTC, Houston, Texas, USA, p 11
Yang L, Zhao J, Liu W, Li Y, Yang M, Song Y (2015) Microstructure observations of natural gas hydrate occurrence in porous media using microfocus X-ray computed tomography. Energy Fuels 29:4835–4841
Yu Y, Cheng YP, Xu X, Soga K (2016) Discrete element modelling of methane hydrate soil sediments using elongated soil particles. Comput Geotech 80:397–409
Yuan Q, Sun C-Y, Yang X, Ma P-C, Ma Z-W, Liu B, Ma Q-L, Yang L-Y, Chen G-J (2012) Recovery of methane from hydrate reservoir with gaseous carbon dioxide using a three-dimensional middle-size reactor. Energy 40:47–58
Yun TS, Santamarina JC, Ruppel C (2007) Mechanical properties of sand, silt, and clay containing tetrahydrofuran hydrate. J Geophys Res Solid Earth 112
Acknowledgements
The authors are grateful for the financial support from the Guangdong Major Project of Basic and Applied Basic Research (Grant No. 2020B0301030003) and the China Geological Survey (Grant DD20190234). The authors also thank the anonymous reviewers for their valuable suggestions that improved the quality of this paper.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ding, Y., Qian, A. & Lu, H. Influences of hydrate morphology and hydrate distribution heterogeneity on the mechanical properties of hydrate-bearing sediments using the discrete element method. Geomech. Geophys. Geo-energ. Geo-resour. 8, 106 (2022). https://doi.org/10.1007/s40948-022-00410-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40948-022-00410-5