Skip to main content
Log in

Surface application of different concentrations of chitosan on recycled paper and its impact on packaging properties

  • Published:
Journal of Coatings Technology and Research Aims and scope Submit manuscript

Abstract

The present study explored chitosan, a biodegradable nontoxic biopolymer, at different dosages for surface treatment of recycled paper to improve various properties relevant to packaging. Chitosan, at all applied concentrations, improved important paper properties like surface, strength and barrier due to which the low strength paper can also be used as a packaging paper. The effects of surface treatment of chitosan solutions of different concentrations on paper were analyzed by measuring breaking length, burst index, tear index, double fold, stiffness, air permeance, water vapor transmission rate (WVTR), wax pick, tensile energy absorption (TEA), and stretch. After surface treatment by 1% solution of chitosan, the breaking length, double fold, TEA, and stretch in machine direction were increased by 53.8%, 243%, 93%, and 75%, respectively, whereas burst index was increased by 38.4% in comparison with the base paper. The WVTR was reduced from 706 to 496 g/m2/24 h, and air passage time was increased from 18 to 65 Gurley s after surface treatment by 1% chitosan solution on the base paper. The chitosan solution at all the concentrations showed antibacterial activity in plate assay therefore reducing the susceptibility of paper to microbial attack.

Graphical abstract

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. Marzbani, P, Azadfallah, M, Yousefzadeh, M, Najafi, F, Pourbabaee, AA, Koivula, H, Ritala, M, “Effect of Polyethylene Wax/Soy Protein-Based Dispersion Barrier Coating on the Physical, Mechanical, and Barrier Characteristics of Paperboards.” J. Coat. Technol. Res., 18 (1) 247–257 (2021)

    Article  CAS  Google Scholar 

  2. Kopacic, S, Walzl, A, Hirn, U, Zankel, A, Kniely, R, Leitner, E, Bauer, W, “Application of Industrially Produced Chitosan in the Surface Treatment of Fibre-Based Material: Effect of Drying Method and Number of Coating Layers on Mechanical and Barrier Properties.” Polymers, 10 (11) 1232 (2018)

    Article  Google Scholar 

  3. Rastogi, V, Samyn, P, “Bio-based Coatings for Paper Applications.” Coatings, 5 (4) 887–930 (2015)

    Article  CAS  Google Scholar 

  4. Kirwan, MJ, Strawbridge, JW, “Plastics in Food Packaging.” In: Coles, R, McDowell, D, Kirwan, MJ (eds.) Food Packaging Technology, pp. 174–240. Blackwell Publishing Ltd, London (2003)

    Google Scholar 

  5. Saroha, V, Khan, H, Raghuvanshi, S, Dutt, D, “Preparation and Characterization of PVOH/Kaolin and PVOH/Talc Coating Dispersion by One-Step Process.” J. Coat. Technol. Res., 19 1171–1186 (2022)

    Article  CAS  Google Scholar 

  6. Guozhong, XG, Qixiang Yang, C, Den, Y, “Mechanism of Paper Wet Strength Development by Polycarboxylic Acids with Different Molecular Weight and Glutaraldehyde/Poly (Vinyl Alcohol).” J. Appl. Polym. Sci., 101 (1) 277–284 (2006)

    Article  Google Scholar 

  7. Hult, EL, Ropponen, J, Poppius-Levlin, K, Ohra-Aho, T, Tamminen, T, “Enhancing the Barrier Properties of Paper Board by a Novel Lignin Coating.” Ind. Crops Prod., 50 694–700 (2013)

    Article  CAS  Google Scholar 

  8. Proshad, R, Kormoker, T, Islam, MS, Haque, MA, Rahman, MM, Mithu, MMR, “Toxic Effects of Plastic on Human Health and Environment: A Consequences of Health Risk Assessment in Bangladesh.” Int. J. Health, 6 (1) 1–5 (2018)

    Article  Google Scholar 

  9. Bhardwaj, S, Bhardwaj, NK, “Mixing of Oxidized Starch and Polyvinyl Alcohol for Surface Sizing of Paper.” Nord. Pulp Pap. Res. J., 34 (3) 343–353 (2019)

    Article  CAS  Google Scholar 

  10. Bhardwaj, S, Bhardwaj, NK, “Comparison of Polyvinyl Alcohol and Oxidised Starch as Surface Sizing Agents.” Appita J., 71 (4) 321–329 (2018)

    Google Scholar 

  11. Bhardwaj, S, Bhardwaj, NK, Negi, YS, “Cleaner Approach for Improving the Papermaking from Agro and Hardwood Blended Pulps Using Biopolymers.” J. Clean. Prod., 213 134–142 (2019)

    Article  CAS  Google Scholar 

  12. Sabazoodkhiz, R, Rahmaninia, M, Ramezani, O, “Interaction of Chitosan Biopolymer with Silica Nanoparticles as a Novel Retention/Drainage and Reinforcement Aid in Recycled Cellulosic Fibers.” Cellulose, 24 (8) 3433–3444 (2017)

    Article  CAS  Google Scholar 

  13. Balan, T, Guezennec, CÉ, Nicu, RA, Ciolacu, FL, Bobu, EL, “Improving Barrier and Strength Properties of Paper by Multi-layer Coating with Bio-based Additives.” Cellul. Chem. Technol., 49 (7–8) 607–615 (2015)

    CAS  Google Scholar 

  14. Miteluţ, AC, Tănase, EE, Popa, VI, Popa, ME, “Sustainable Alternative for Food Packaging: Chitosan Biopolymer: A Review.” Agro Life Sci. J., 4 52–61 (2015)

    Google Scholar 

  15. Bhardwaj, S, Bhardwaj, NK, Negi, YS, “Effect of Degree of Deacetylation of Chitosan on its Performance as Surface Application Chemical for Paper-Based Packaging.” Cellulose, 27 (9) 5337–5352 (2020)

    Article  CAS  Google Scholar 

  16. Bhardwaj, S, Bhardwaj, NK, Negi, YS, “Surface Coating of Chitosan of Different Degree of Acetylation on Non Surface Sized Writing and Printing Grade Paper.” Carbohydr. Polym., 269 117674 (2021)

    Article  CAS  Google Scholar 

  17. Lertsutthiwong, P, Nazhad, MM, Chandrkrachang, S, Stevens, WF, “Chitosan as a Surface Sizing Agent for Offset Printing Paper.” Appita J., 57 (4) 274–280 (2004)

    CAS  Google Scholar 

  18. Divsalar, E, Tajik, H, Moradi, M, Forough, M, Lotfi, M, Kuswandi, B, “Characterization of Cellulosic Paper Coated with Chitosan-Zinc Oxide Nanocomposite Containing Nisin and Its Application in Packaging of UF Cheese.” Int. J. Biol. Macromol., 109 1311–1318 (2018)

    Article  CAS  Google Scholar 

  19. Van den Broek, LA, Knoop, RJ, Kappen, FH, Boeriu, CG, “Chitosan Films and Blends for Packaging Material.” Carbohydr. Polym., 116 237–242 (2015)

    Article  Google Scholar 

  20. Vikele, L, Laka, M, Sable, I, Rozenberga, L, Grinfelds, U, Zoldners, J, Passas, R, Mauret, E, “Effect of Chitosan on Properties of Paper for Packaging.” Cellul. Chem. Technol., 51 (1–2) 67–73 (2017)

    CAS  Google Scholar 

  21. Basta, AH, Khwaldia, K, Aloui, H, El-Saied, H, “Enhancing the Performance of Carboxymethyl Cellulose by Chitosan in Producing Barrier Coated Paper Sheets.” Nord. Pulp Pap. Res. J., 30 (4) 617–625 (2015)

    Article  CAS  Google Scholar 

  22. Nassar, MA, El-Sakhawy, M, Madkour, HM, El-ziaty, AK, Mohamed, SA, “Novel Coating of Bagasse Paper Sheets by Gelatin and Chitosan.” Nord. Pulp Pap. Res. J., 29 (4) 741–746 (2014)

    Article  CAS  Google Scholar 

  23. Khwaldia, K, Basta, AH, Aloui, H, El-Saied, H, “Chitosan–Caseinate Bilayer Coatings for Paper Packaging Materials.” Carbohydr. Polym., 99 508–516 (2014)

    Article  CAS  Google Scholar 

  24. Kuusipalo, J, Kaunisto, M, Laine, A, Kellomaki, M, “Chitosan as a Coating Additive in Paper and Paperboard.” Tappi J., 4 (8) 17–21 (2005)

    CAS  Google Scholar 

  25. Zakaria, S, Chia, CH, Ahmad, WHW, Kaco, H, Chook, SW, Chan, CH, “Mechanical and Antibacterial Properties of Paper Coated with Chitosan.” Sains Malays., 44 905–911 (2015)

    Article  CAS  Google Scholar 

  26. Ashori, A, Raverty, WD, Harun, J, “Effect of Chitosan Addition on the Surface Properties of Kenaf (Hibiscus cannabinus) Paper.” Fibers Polym., 6 (2) 174–179 (2005)

    Article  CAS  Google Scholar 

  27. Kjellgren, H, Engström, G, “Influence of Base Paper on the Barrier Properties of Chitosan-Coated Papers.” Nord. Pulp Pap. Res. J., 21 (5) 685–689 (2006)

    Article  CAS  Google Scholar 

  28. Kjellgren, H, Gällstedt, M, Engström, G, Järnström, L, “Barrier and Surface Properties of Chitosan-Coated Greaseproof Paper.” Carbohydr. Polym., 65 (4) 453–460 (2006)

    Article  CAS  Google Scholar 

  29. Chen, Z, Li, C, Song, Z, Qian, X, “Wet Strength and Antibacterial Performance of Cellulosic Paper Induced by Maleic Anhydride-Acylated Chitosan.” BioResources, 9 (3) 4503–4509 (2014)

    Article  Google Scholar 

  30. Fernandez-Saiz, P, Lagaron, JM, Hernandez-Muñoz, P, Ocio, MJ, “Characterization of Antimicrobial Properties on the Growth of S. aureus of Novel Renewable Blends of Gliadins and Chitosan of Interest in Food Packaging and Coating Applications.” Int. J. Food Microbiol., 124 (1) 13–20 (2008)

    Article  CAS  Google Scholar 

  31. Lim, SH, Hudson, SM, “Synthesis and Antimicrobial Activity of a Water-Soluble Chitosan Derivative with a Fiber-Reactive Group.” Carbohydr. Res., 339 (2) 313–319 (2004)

    Article  CAS  Google Scholar 

  32. Ling, Y, Luo, Y, Luo, J, Wang, X, Sun, R, “Novel Antibacterial Paper Based on Quaternized Carboxymethyl Chitosan/Organic Montmorillonite/Ag NP Nanocomposites.” Ind. Crops Prod., 51 470–479 (2013)

    Article  CAS  Google Scholar 

  33. Zemljič, LF, Valh, JV, Kreže, T, “Preparation of Antimicrobial Paper Sheets Using Chitosan.” Cellul. Chem. Technol., 51 75–81 (2017)

    Google Scholar 

  34. Niroomand, F, Khosravani, A, Younesi, H, “Fabrication and Properties of Cellulose-Nanochitosan Biocomposite Film Using Ionic Liquid.” Cellulose, 23 (2) 1311–1324 (2016)

    Article  CAS  Google Scholar 

  35. De Britto, D, Assis, OB, “A Novel Method for Obtaining a Quaternary Salt of Chitosan.” Carbohydr. Polym., 69 (2) 305–310 (2007)

    Article  Google Scholar 

  36. Li, H, Du, Y, Wu, X, Zhan, H, “Effect of Molecular Weight and Degree of Substitution of Quaternary Chitosan on its Adsorption and Flocculation Properties for Potential Retention-Aids in Alkaline Papermaking.” Colloids Surf. A Physicochem. Eng. Asp., 242 (1–3) 1–8 (2004)

    Article  CAS  Google Scholar 

  37. Kamel, S, El-Sakhawy, M, Nada, AMA, “Mechanical Properties of the Paper Sheets Treated with Different Polymers.” Thermochim. Acta., 421 (1–2) 81–85 (2004)

    Article  CAS  Google Scholar 

  38. Reis, AB, Yoshida, CM, Reis, APC, Franco, TT, “Application of Chitosan Emulsion as a Coating on Kraft Paper.” Polym. Int., 60 (6) 963–969 (2011)

    Article  CAS  Google Scholar 

  39. Zhang, W, Xiao, H, Qian, L, “Enhanced Water Vapour Barrier and Grease Resistance of Paper Bilayer-Coated with Chitosan and Beeswax.” Carbohydr. Polym., 101 401–406 (2014)

    Article  CAS  Google Scholar 

Download references

Acknowledgments

The first author is thankful to Mr. R. Varadhan, Ex-Director of ACIRD, Yamuna Nagar for allowing the access to the facilities of ACIRD for pursuing Ph.D. research work.

Funding

This research did not obtain any fund from any funding agencies in the public, commercial or nonprofit sectors.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Nishi Kant Bhardwaj.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Bhardwaj, S., Kaur, P., Bhardwaj, N.K. et al. Surface application of different concentrations of chitosan on recycled paper and its impact on packaging properties. J Coat Technol Res 20, 1285–1298 (2023). https://doi.org/10.1007/s11998-022-00743-6

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11998-022-00743-6

Keywords

Navigation