Abstract
Carbon capture and storage will play a crucial role in industrial decarbonisation. However, the current literature presents a large variability in the techno-economic feasibility of CO2 capture technologies. Consequently, reliable pathways for carbon capture deployment in energy-intensive industries are still missing. This work provides a comprehensive review of the state-of-the-art CO2 capture technologies for decarbonisation of the iron and steel, cement, petroleum refining, and pulp and paper industries. Amine scrubbing was shown to be the least feasible option, resulting in the average avoided CO2 cost of between \(62.7\;\mathrm{C}\!\!\!\!{\scriptstyle{{}^=}\,} \cdot {\rm{t}}_{{\rm{C}}{{\rm{O}}_2}}^{\;\;\;\;\;\;\;\; - 1}\) for the pulp and paper and \(104.6\;\mathrm{C}\!\!\!\!{\scriptstyle{{}^=}\,} \cdot {\rm{t}}_{{\rm{C}}{{\rm{O}}_2}}^{\;\;\;\;\;\;\;\; - 1}\) for the iron and steel industry. Its average equivalent energy requirement varied between 2.7 (iron and steel) and \(5.1\;\;{\rm{M}}{{\rm{J}}_{{\rm{th}}}} \cdot {\rm{kg}}_{{\rm{C}}{{\rm{O}}_2}}^{\;\;\;\;\;\;\;\; - 1}\) (cement). Retrofits of emerging calcium looping were shown to improve the overall viability of CO2 capture for industrial decarbonisation. Calcium looping was shown to result in the average avoided CO2 cost of between 32.7 (iron and steel) and \(42.9\;\mathrm{C}\!\!\!\!{\scriptstyle{{}^=}\,} \cdot {\rm{t}}_{{\rm{C}}{{\rm{O}}_2}}^{\;\;\;\;\;\;\;\; - 1}\) (cement). Its average equivalent energy requirement varied between 2.0 (iron and steel) and \(3.7\;\;{\rm{M}}{{\rm{J}}_{{\rm{th}}}} \cdot {\rm{kg}}_{{\rm{C}}{{\rm{O}}_2}}^{\;\;\;\;\;\;\;\; - 1}\) (pulp and paper). Such performance demonstrated the superiority of calcium looping for industrial decarbonisation. Further work should focus on standardising the techno-economic assessment of technologies for industrial decarbonisation.
Article PDF
Similar content being viewed by others
References
Griffin P W, Hammond G P. Industrial energy use and carbon emissions reduction in the iron and steel sector: a UK perspective. Applied Energy, 2019, 249: 109–125
Rogelj J, Popp A, Calvin K V, Luderer G, Emmerling J, Gernaat D, Fujimori S, Strefler J, Hasegawa T, Marangoni G, et al. Scenarios towards limiting global mean temperature increase below 1.5 °C. Nature Climate Change, 2018, 8(4): 325–332
McGrail B P, Freeman C J, Brown C F, Sullivan E C, White S K, Reddy S, Garber R D, Tobin D, Gilmartin J J, Steffensen E J. Overcoming business model uncertainty in a carbon dioxide capture and sequestration project: case study at the Boise White Paper Mill. International Journal of Greenhouse Gas Control, 2012, 9: 91–102
IPCC. Summary for Policymakers. Climate Change 2014 Mitigation of Climate Change. Summary for Policymakers and Technical Summary, 2015
Gerres T, Chaves Ávila J P, Llamas P L, San Román T G. A review of cross-sector decarbonisation potentials in the European energy intensive industry. Journal of Cleaner Production, 2019, 210: 585–601
IEA. Industry Direct CO2 Emissions in the Sustainable Development Scenario, 2000–2030. Paris: IEA Publications, 2020
Bataille C. Low and Zero Emissions in the Steel and Cement Industries: Barriers, Technologies and Policies. Paris: Organisation for Economic Co-operation and Development, 2019: 2–42
Bataille C, Åhman M, Neuhoff K, Nilsson L J, Fischedick M, Lechtenböhmer S, Solano-Rodriquez B, Denis-Ryan A, Stiebert S, Waisman H, et al. A review of technology and policy deep decarbonization pathway options for making energy-intensive industry production consistent with the Paris Agreement. Journal of Cleaner Production, 2018, 187: 960–973
Yang F, Meerman J C, Faaij A P C. Carbon capture and biomass in industry: a techno-economic analysis and comparison of negative emission options. Renewable & Sustainable Energy Reviews, 2021, 144: 111028
Fennell P S, Florin N, Napp T, Hills T. CCS from Industrial Sources. Sustainable Technologies, Systems and Policies, 2012, 2012: 17
Koytsoumpa E I, Bergins C, Kakaras E. The CO2 economy: review of CO2 capture and reuse technologies. Journal of Supercritical Fluids, 2018, 132: 3–16
Kuramochi T, Ramírez A, Turkenburg W, Faaij A. Comparative assessment of CO2 capture technologies for carbon-intensive industrial processes. Progress in Energy and Combustion Science, 2012, 38(1): 87–112
Leeson D, Mac Dowell N, Shah N, Petit C, Fennell P S. A techno-economic analysis and systematic review of carbon capture and storage (CCS) applied to the iron and steel, cement, oil refining and pulp and paper industries, as well as other high purity sources. International Journal of Greenhouse Gas Control, 2017, 61: 71–84
Markewitz P, Kuckshinrichs W, Leitner W, Linssen J, Zapp P, Bongartz R, Schreiber A, Müller T E. Worldwide innovations in the development of carbon capture technologies and the utilization of CO2. Energy & Environmental Science, 2012, 5(6): 7281–7305
Napp T A, Gambhir A, Hills T P, Florin N, Fennell P. A review of the technologies, economics and policy instruments for decarbonising energy-intensive manufacturing industries. Renewable & Sustainable Energy Reviews, 2014, 30: 616–640
Rissman J, Bataille C, Masanet E, Aden N, Morrow W R III, Zhou N, Elliott N, Dell R, Heeren N, Huckestein B, et al. Technologies and policies to decarbonize global industry: review and assessment of mitigation drivers through 2070. Applied Energy, 2020, 266: 114848
Nurdiawati A, Urban F. Towards deep decarbonisation of energy-intensive industries: a review of current status, technologies and policies. Energies, 2021, 14(9): 2408
Hanak D P, Anthony E J, Manovic V. A review of developments in pilot-plant testing and modelling of calcium looping process for CO2 capture from power generation systems. Energy & Environmental Science, 2015, 8(8): 2199–2249
Tian S, Jiang J, Zhang Z, Manovic V. Inherent potential of steelmaking to contribute to decarbonisation targets via industrial carbon capture and storage. Nature Communications, 2018, 9(1): 1–8
De Lena E, Spinelli M, Gatti M, Scaccabarozzi R, Campanari S, Consonni S, Cinti G, Romano M C. Techno-economic analysis of calcium looping processes for low CO2 emission cement plants. International Journal of Greenhouse Gas Control, 2019, 82: 244–260
Santos M P S, Manovic V, Hanak D P. Unlocking the potential of pulp and paper industry to achieve carbon-negative emissions via calcium looping retrofit. Journal of Cleaner Production, 2021, 280: 124431
Yun S, Jang M G, Kim J K. Techno-economic assessment and comparison of absorption and membrane CO2 capture processes for iron and steel industry. Energy, 2021, 229: 120778
Ramírez-Santos Á A, Bozorg M, Addis B, Piccialli V, Castel C, Favre E. Optimization of multistage membrane gas separation processes. Example of application to CO2 capture from blast furnace gas. Journal of Membrane Science, 2018, 566: 346–366
Baker R W, Freeman B, Kniep J, Huang Y I, Merkel T C. CO2 capture from cement plants and steel mills using membranes. Industrial & Engineering Chemistry Research, 2018, 57(47): 15963–15970
Voldsund M, Gardarsdottir S O, De Lena E, Pérez-Calvo J F, Jamali A, Berstad D, Fu C, Romano M, Roussanaly S, Anantharaman R, et al. Comparison of technologies for CO2 capture from cement production—Part 1: Technical evaluation. Energies, 2019, 12(3): 559
Gardarsdottir S, De Lena E, Romano M, Roussanaly S, Voldsund M, Pérez-Calvo J F, Berstad D, Fu C, Anantharaman R, Sutter D, et al. Comparison of technologies for CO2 capture from cement production—Part 2: Cost analysis. Energies, 2019, 12(3): 542
Ferrari M C, Amelio A, Nardelli G M, Costi R. Assessment on the application of facilitated transport membranes in cement plants for CO2 capture. Energies, 2021, 14(16): 1–15
IRENA. Renewable Energy in Manufacturing—a Technology Roadmap for REmap 2030. Technical Report, 2014
Dean C C, Blamey J, Florin N H, Al-Jeboori M J, Fennell P S. The calcium looping cycle for CO2 capture from power generation, cement manufacture and hydrogen production. Chemical Engineering Research & Design, 2011, 89(6): 836–855
Hills T, Florin N, Fennell P S. Decarbonising the cement sector: a bottom-up model for optimising carbon capture application in the UK. Journal of Cleaner Production, 2016, 139: 1351–1361
Damen K, Troost M V, Faaij A, Turkenburg W. A comparison of electricity and hydrogen production systems with CO2 capture and storage. Part A: review and selection of promising conversion and capture technologies. Progress in Energy and Combustion Science, 2006, 32(2): 215–246
van Straelen J, Geuzebroek F, Goodchild N, Protopapas G, Mahony L. CO2 capture for refineries, a practical approach. Energy Procedia, 2009, 1(1): 179–185
Feron P H M, Hendriks C A. CO2 capture process principles and costs. Oil & Gas Science and Technology, 2005, 60(3): 451–459
Bottoms R. Process for separating acidic gases. US Patent, 1783901, 1930-12-02
Rao A B, Rubin E S. A technical, economic, and environmental assessment of amine-based CO2 capture technology for power plant greenhouse gas control. Environmental Science & Technology, 2002, 36(20): 4467–4475
Shao R, Stangeland A. Amines Used in CO2 Capture—Health and Environmental Impacts. Bellona Report, 2009
Xu G, Jin H, Yang Y, Xu Y, Lin H, Duan L. A comprehensive techno-economic analysis method for power generation systems with CO2 capture. International Journal of Energy Research, 2010, 34(4): 321–332
Nurrokhmah L, Mezher T, Abu-Zahra M R M. Evaluation of handling and reuse approaches for the waste generated from MEA-based CO2 capture with the consideration of regulations in the UAE. Environmental Science & Technology, 2013, 47(23): 13644–13651
Farla J C M, Hendriks C A, Blok K. Carbon dioxide recovery from industrial processes. Climatic Change, 1995, 29(4): 439–461
Wiley D E, Ho M T, Bustamante A. Assessment of opportunities for CO2 capture at iron and steel mills: an Australian perspective. Energy Procedia, 2011, 4: 2654–2661
Arasto A, Tsupari E, Kärki J, Pisilä E, Sorsamäki L. Post-combustion capture of CO2 at an integrated steel mill—Part I: technical concept analysis. International Journal of Greenhouse Gas Control, 2013, 16: 271–277
Tsupari E, Kärki J, Arasto A, Pisilä E. Post-combustion capture of CO2 at an integrated steel mill—Part II: economic feasibility. International Journal of Greenhouse Gas Control, 2013, 16: 278–286
Onarheim K, Santos S, Kangas P, Hankalin V. Performance and cost of CCS in the pulp and paper industry part 2: economic feasibility of amine-based post-combustion CO2 capture. International Journal of Greenhouse Gas Control, 2017, 66: 60–75
Nwaoha C, Tontiwachwuthikul P. Carbon dioxide capture from pulp mill using 2-amino-2-methyl-1-propanol and monoethanolamine blend: techno-economic assessment of advanced process configuration. Applied Energy, 2019, 250: 1202–1216
Han K, Ahn C K, Lee M S, Rhee C H, Kim J Y, Chun H D. Current status and challenges of the ammonia-based CO2 capture technologies toward commercialization. International Journal of Greenhouse Gas Control, 2013, 14: 270–281
Rodríguez N, Murillo R, Abanades J C. CO2 capture from cement plants using oxyfired precalcination and/or calcium looping. Environmental Science & Technology, 2012, 46(4): 2460–2466
Blamey J, Anthony E J, Wang J, Fennell P S. The calcium looping cycle for large-scale CO2 capture. Progress in Energy and Combustion Science, 2010, 36(2): 260–279
Anthony E J. Solid looping cycles: a new technology for coal conversion. Industrial & Engineering Chemistry Research, 2008, 47(6): 1747–1754
Morin J X, Béal C. Chapter 37: chemical looping combustion of refinery fuel gas with CO2 Capture. In: Carbon Dioxide Capture for Storage in Deep Geologic Formations, Volume 1. Amsterdam: Elsevier, 2005, 647–654
Adánez J, Abad A, Mendiara T, Gayán P, de Diego L F, García-Labiano F. Chemical looping combustion of solid fuels. Progress in Energy and Combustion Science, 2018, 65: 6–66
Vilches T B, Lind F, Rydén M, Thunman H. Experience of more than 1000 h of operation with oxygen carriers and solid biomass at large scale. Applied Energy, 2017, 190: 1174–1183
Fernández J R, Spallina V, Abanades J C. Advanced packed-bed Ca-Cu looping process for the CO2 capture from steel mill off-gases. Frontiers in Energy Research, 2020, 8(146): 1–13
de Diego L F, García-Labiano F, Gayán P, Celaya J, Palacios J M, Adánez J. Operation of a 10 kWth chemical-looping combustor during 200 h with a CuO-Al2O3 oxygen carrier. Fuel, 2007, 86(7–8): 1036–1045
Zafar Q, Mattisson T, Gevert B. Integrated hydrogen and power production with CO2 capture using chemical-looping reforming redox reactivity of particles of CuO, Mn2O3, NiO, and Fe2O3 using SiO2 as a support. Industrial & Engineering Chemistry Research, 2005, 44(10): 3485–3496
Zhao X, Zhou H, Sikarwar V S, Zhao M, Park A H A, Fennell P S, Shen L, Fan L S. Biomass-based chemical looping technologies: the good, the bad and the future. Energy & Environmental Science, 2017, 10(9): 1885–1910
Wang P, Means N, Shekhawat D, Berry D, Massoudi M. Chemical-looping combustion and gasification of coals and oxygen carrier development: a brief review. Energies, 2015, 8(10): 10605–10635
Darmawan A, Ajiwibowo M W, Yoshikawa K, Aziz M, Tokimatsu K. Energy-efficient recovery of black liquor through gasification and syngas chemical looping. Applied Energy, 2018, 219: 290–298
Darmawan A, Ajiwibowo M W, Biddinika M K, Tokimatsu K, Aziz M. Black liquor-based hydrogen and power co-production: combination of supercritical water gasification and syngas chemical looping. Applied Energy, 2019, 252: 113446
Mattisson T, Järdnäs A, Lyngfelt A. Reactivity of some metal oxides supported on alumina with alternating methane and oxygen-application for chemical-looping combustion. Energy & Fuels, 2003, 17(3): 643–651
Hossain M M, de Lasa H I. Chemical-looping combustion (CLC) for inherent CO2 separations—a review. Chemical Engineering Science, 2008, 63: 4433–4451
Shimizu T, Hirama T, Hosoda H, Kitano K, Inagaki M, Tejima K. A twin fluid-bed reactor for removal of CO2 from combustion processes. Chemical Engineering Research & Design, 1999, 77(1): 62–68
Hilz J, Helbig M, Haaf M, Daikeler A, Ströhle J, Epple B. Long-term pilot testing of the carbonate looping process in 1 MWth scale. Fuel, 2017, 210: 892–899
Rolfe A, Huang Y, Haaf M, Pita A, Rezvani S, Dave A, Hewitt N J. Technical and environmental study of calcium carbonate looping versus oxy-fuel options for low CO2 emission cement plants. International Journal of Greenhouse Gas Control, 2018, 75: 85–97
Ozcan D C, Macchi A, Lu D, Kierzkowska A, Ahn H, Müller C, Brandani S. Ca-Cu looping process for CO2 capture from a power plant and its comparison with Ca-looping, oxy-combustion and amine-based CO2 capture processes. International Journal of Greenhouse Gas Control, 2015, 43: 198–212
Cuenca M A, Anthony E J. Pressurized Fluidized Bed Combustion of Coal. 1st ed. Dordrecht: Springer, 1995
Arias B, Diego M E, Abanades J C, Lorenzo M, Diaz L, Martínez D, Alvarez J, Sánchez-Biezma A. Demonstration of steady state CO2 capture in a 1.7 MWth calcium looping pilot. International Journal of Greenhouse Gas Control, 2013, 18: 237–245
Erans M, Beisheim T, Manovic V, Jeremias M, Patchigolla K, Dieter H, Duan L, Anthony E J. Effect of SO2 and steam on CO2 capture performance of biomass-templated calcium aluminate pellets. Faraday Discussions, 2016, 192: 97–111
Grasa G S, Abanades J C. CO2 capture capacity of CaO in long series of carbonation/calcination cycles. Industrial & Engineering Chemistry Research, 2006, 45(26): 8846–8851
Borgwardt R H. Sintering of nascent calcium oxide. Chemical Engineering Science, 1989, 44: 53–60
Sun P, Grace J R, Lim C J, Anthony E J. The effect of CaO sintering on cyclic CO2 capture in energy systems. AIChE Journal. American Institute of Chemical Engineers, 2007, 53(9): 2432–2442
Perejón A, Romeo L M, Lara Y, Lisbona P, Martínez A, Valverde J M. The calcium-looping technology for CO2 capture: on the important roles of energy integration and sorbent behavior. Applied Energy, 2016, 162: 787–807
Baker E H. 87. The calcium oxide-carbon dioxide system in the pressure range 1–300 atmospheres. Journal of the Chemical Society, 1962, 0(0): 464–470
Lyon R K. Method and apparatus for unmixed combustion as an alternative to fire. US Patent, 5509362, 1996-04-23
Abanades J C, Murillo R, Fernandez J R, Grasa G, Martínez I. New CO2 capture process for hydrogen production combining Ca and Cu chemical loops. Environmental Science & Technology, 2010, 44(17): 6901–6904
Dieter H, Bidwe A R, Varela-Duelli G, Charitos A, Hawthorne C, Scheffknecht G. Development of the calcium looping CO2 capture technology from lab to pilot scale at IFK, University of Stuttgart. Fuel, 2014, 127: 23–37
Ströhle J, Junk M, Kremer J, Galloy A, Epple B. Carbonate looping experiments in a 1 MWth pilot plant and model validation. Fuel, 2014, 127: 13–22
Chang M H, Chen W C, Huang C M, Liu W H, Chou Y C, Chang W C, Chen W, Cheng J Y, Huang K E, Hsu H W. Design and experimental testing of a 1.9 MWth calcium looping pilot plant. Energy Procedia, 2014, 63: 2100–2108
Mayer K, Schanz E, Pröll T, Hofbauer H. Performance of an iron based oxygen carrier in a 120 kWth chemical looping combustion pilot plant. Fuel, 2018, 217: 561–569
Lyngfelt A, Linderholm C. Chemical-looping combustion of solid fuels—status and recent progress. Energy Procedia, 2017, 114: 371–386
Abdulally I, Beal C, Andrus H E, Epple B, Lyngfelt A, White B. Alstom’s chemical looping technology, program update. In 11th Annual Conference on Carbon Capture Utilization & Sequestration Pittsburgh. Pittsburgh, Pennsylvania, 2014
Yazdanpanah M, Guillou F, Bertholin S, Zhang A. Demonstration of chemical looping combustion (CLC) with petcoke feed for refining industry in a 3 MWth pilot plant. SSRN Electronic Journal, 2019, 33: 1–8
Croezen H, Korteland M. Technological Developments in Europe. A Long-Term View of CO2 Efficient Manufacturing in the European Region. Technical Report, 2010
IEA. Iron and Steel Technology Roadmap. Paris: IEA Publications, 2020
Ho M T, Allinson G W, Wiley D E. Comparison of MEA capture cost for low CO2 emissions sources in Australia. International Journal of Greenhouse Gas Control, 2011, 5(1): 49–60
WorldSteel Association. About steel. WorldSteel Website, 2021
Bender M, Roussiere T, Schelling H, Schuster S, Schwab E. Coupled production of steel and chemicals. Chemieingenieurtechnik (Weinheim), 2018, 90(11): 1782–1805
EUROFER: the European steel association. A Steel Roadmap for a Low Carbon Europe 2050. Technical Report, 2013
van der Stel J, Louwerse G, Sert D, Hirsch A, Eklund N, Pettersson M. Top gas recycling blast furnace developments for ‘green’ and sustainable ironmaking. Ironmaking & Steelmaking, 2013, 40(7): 483–489
Ho M T, Bustamante A, Wiley D E. Comparison of CO2 capture economics for iron and steel mills. International Journal of Greenhouse Gas Control, 2013, 19: 145–159
Dreillard M, Broutin P, Briot P, Huard T, Lettat A. Application of the DMXTM CO2 capture process in steel industry. Energy Procedia, 2017, 114: 2573–2589
Garðarsdóttir S Ó, Normann F, Skagestad R, Johnsson F. Investment costs and CO2 reduction potential of carbon capture from industrial plants—a Swedish case study. International Journal of Greenhouse Gas Control, 2018, 76: 111–124
Cormos A M, Dragan S, Petrescu L, Sandu V, Cormos C C. Techno-economic and environmental evaluations of decarbonized fossil-intensive industrial processes by reactive absorption & adsorption CO2 capture systems. Energies, 2020, 13(5): 1268
Tian S, Jiang J, Yan F, Li K, Chen X, Manovic V. Highly efficient CO2 capture with simultaneous iron and CaO recycling for the iron and steel industry. Green Chemistry, 2016, 18(14): 4022–4031
Tian S, Li K, Jiang J, Chen X, Yan F. CO2 abatement from the iron and steel industry using a combined Ca-Fe chemical loop. Applied Energy, 2016, 170: 345–352
Fernández J R, Martínez I, Abanades J C, Romano M C. Conceptual design of a Ca-Cu chemical looping process for hydrogen production in integrated steelworks. International Journal of Hydrogen Energy, 2017, 42(16): 11023–11037
Martínez I, Fernández J R, Abanades J C, Romano M C. Integration of a fluidised bed Ca-Cu chemical looping process in a steel mill. Energy, 2018, 163: 570–584
Gazzani M, Romano M C, Manzolini G. CO2 capture in integrated steelworks by commercial-ready technologies and SEWGS process. International Journal of Greenhouse Gas Control, 2015, 41: 249–267
Manzolini G, Giuffrida A, Cobden P D, van Dijk H A J, Ruggeri F, Consonni F. Techno-economic assessment of SEWGS technology when applied to integrated steel-plant for CO2 emission mitigation. International Journal of Greenhouse Gas Control, 2020, 94: 102935
Barker D J, Turner S A, Napier-Moore P A, Clark M, Davison J E. CO2 capture in the cement industry. Energy Procedia, 2009, 1(1): 87–94
Favier A, Scrivener K, Habert G. Decarbonizing the cement and concrete sector: integration of the full value chain to reach net zero emissions in Europe. IOP Conference Series. Earth and Environmental Science, 2019, 225(1): 012009
IEA. Cement. Paris: IEA Publications, 2020
Atsonios K, Grammelis P, Antiohos S K, Nikolopoulos N, Kakaras E. Integration of calcium looping technology in existing cement plant for CO2 capture: process modeling and technical considerations. Fuel, 2015, 153: 210–223
Gomez A, Briot P, Raynal L, Broutin P, Gimenez M, Soazic M, Cessat P, Saysset S. ACACIA project—development of a post-combustion CO2 capture process. Case of the DMXTM process. Oil & Gas Science and Technology—Revue d’IFP Energies nouvelles, 2014, 69(6): 1121–1129
Zhou W, Jiang D, Chen D, Griffy-Brown C, Jin Y, Zhu B. Capturing CO2 from cement plants: a priority for reducing CO2 emissions in China. Energy, 2016, 106: 464–474
Markewitz P, Zhao L, Ryssel M, Moumin G, Wang Y, Sattler, Robinius, Stolten. Carbon capture for CO2 emission reduction in the cement industry in Germany. Energies, 2019, 12(12): 2432
ECRA. ECRA CCS Project—Report on Phase III. Technical Report TR-ECRA119/2012, 2012
Carrasco-Maldonado F, Spörl R, Fleiger K, Hoenig V, Maier J, Scheffknecht G. Oxy-fuel combustion technology for cement production—state of the art research and technology development. International Journal of Greenhouse Gas Control, 2016, 45: 189–199
Romeo L M, Catalina D, Lisbona P, Lara Y, Martinez A. Ca looping technology: current status, developments and future directions. Greenhouse Gases. Science And Technology, 2011, 1: 72–82
Diego M E, Arias B, Abanades J C. Analysis of a double calcium loop process configuration for CO2 capture in cement plants. Journal of Cleaner Production, 2016, 117: 110–121
Johansson D, Rootzén J, Berntsson T, Johnsson F. Assessment of strategies for CO2 abatement in the European petroleum refining industry. Energy, 2012, 42(1): 375–386
van Straelen J, Geuzebroek F, Goodchild N, Protopapas G, Mahony L. CO2 capture for refineries, a practical approach. International Journal of Greenhouse Gas Control, 2010, 4(2): 316–320
Bains P, Psarras P, Wilcox J. CO2 capture from the industry sector. Progress in Energy and Combustion Science, 2017, 63: 146–172
IEA. Chemicals. Paris: IEA Publications, 2020
Berghout N, van den Broek M, Faaij A. Techno-economic performance and challenges of applying CO2 capture in the industry: a case study of five industrial plants. International Journal of Greenhouse Gas Control, 2013, 17: 259–279
Fernández-Dacosta C, van der Spek M, Hung C R, Oregionni G D, Skagestad R, Parihar P, Gokak D T, Strømman A H, Ramirez A. Prospective techno-economic and environmental assessment of carbon capture at a refinery and CO2 utilisation in polyol synthesis. Journal of CO2 Utilization, 2017, 21: 405–422
Möllersten K, Yan J, Westermark M. Potential and cost-effectiveness of CO2 reductions through energy measures in Swedish pulp and paper mills. Energy, 2003, 28(7): 691–710
Onarheim K, Santos S, Kangas P, Hankalin V. Performance and costs of CCS in the pulp and paper industry part 1: performance of amine-based post-combustion CO2 capture. International Journal of Greenhouse Gas Control, 2017, 59: 58–73
IEA. Pulp and Paper. Paris: IEA Publications, 2020
Hektor E, Berntsson T. Reduction of greenhouse gases in integrated pulp and paper mills: possibilities for CO2 capture and storage. Clean Technologies and Environmental Policy, 2009, 11(1): 59–65
Garcia M, Berghout N. Toward a common method of cost-review for carbon capture technologies in the industrial sector: cement and iron and steel plants. International Journal of Greenhouse Gas Control, 2019, 87: 142–158
Roussanaly S, Berghout N, Fout T, Garcia M, Gardarsdottir S, Nazir S M, Ramirez A, Rubin E S. Towards improved cost evaluation of carbon capture and storage from industry. International Journal of Greenhouse Gas Control, 2021, 106: 103263
Acknowledgements
This publication is based on research conducted within the “Clean heat, power and hydrogen from biomass and waste” project funded by UK Engineering and Physical Sciences Research Council (EPSRC reference: EP/R513027/1).
Author information
Authors and Affiliations
Corresponding author
Electronic Supplementary Material
11705_2022_2151_MOESM1_ESM.pdf
Carbon capture for decarbonisation of energy-intensive industries: a comparative review of techno-economic feasibility of solid looping cycles
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Santos, M.P.S., Hanak, D.P. Carbon capture for decarbonisation of energy-intensive industries: a comparative review of techno-economic feasibility of solid looping cycles. Front. Chem. Sci. Eng. 16, 1291–1317 (2022). https://doi.org/10.1007/s11705-022-2151-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11705-022-2151-5