The article presents an algorithm for optimizing design parameters of redistribution plates for dispersing heavy phase in a packed extractor using the example of liquefied hydrocarbon gas demercaptanization column. Several ratios of the main design dimensions at which the distribution of continuous and dispersed phases is the best under the set conditions were obtained by the method developed for assessing the uniformity of flow distribution based on CFD analysis results.
Similar content being viewed by others
References
A. I. Skoblo, Yu. K. Malokanov, A. I. Vladimirov, and V. A. Shchelkunov, Processes and Apparatuses of Petroleum Refining and Petrochemistry [in Russian], OOO Nedra-Biznestsentr, Moscow (2000).
V. S. Leontiev and S. I. Sidorov, “Modern packed columns. Special design features,” Khim. Prom., 82, No. 7, 347–356 (2005).
M. Sheilan, B. H. Spooner, D. E. Street, and E. Hoorn, Amine Treating and Sour Water Stripping, Amine Experts Inc. (2005).
AlphaPack Design Sheet. Liquid-liquid Extraction. HAT International.
T. V. Prokofieva, S. S. Kruglov, and E. B. Grafarova, Technological Calculation of Extraction Column [in Russian], Publishing Center of I. M. Gubkin Russian State University of Oil and Gas (National Research University), Moscow (2017).
Koch-Glitsch. Liquid Distributors (Metal) [Electronic resource]: Catalog of Internal Devices of Column Equipment. Electronic Data. Access mode: https://koch-glitsch.com/products/packing-and-internals?productcategory=packing-and-internals&categoryname=m-Liquid-Distributors. (access 24.03.2022).
R. B. Nielsen, J. Rogers, J. A. Bullin, and K. J. Duewall, Treat LPGs with Amines, 74th Annual GPA Convention “Design Considerations for Sweetening LPG’s with Amines” (1995).
K. A. Mullabaev, D. V. Lesnoi, and S. K. Churakova, “Investigation of designs of redistributing plates of packed extraction columns by CFD analysis methods,” in: Collec. Papers of 6th Int. Sci. Conf. “Theory and Practice of Mass Transfer Processes of Chemical Technology (Marushkin Readings)” [in Russian], Ufa State Petroleum Technological University, Ufa (2021), pp. 116–117.
G. S. Borisov, V. P. Brykov, Yu. I. Dytnerskii, et al., Basic Processes and Apparatuses of Chemical Technology [in Russian], Khimiya, Moscow (1991), 496 p.
M. Wehrli, S. Hirschberg, and R. Schweizer, “Influence of vapour feed design on the flow distribution below packings,” I. Chem. Eng., No. 81, 116–121 (2003).
T. I. Mannanov, S. K. Churakova, D. V. Lesnoi, et al., “CFD-aнaлиз - modern approach to study of flow separation and distribution in feed injection devices of mass exchange apparatuses,” in: Bulatov Readings [in Russian], Vol. 5, Yug Publishers Ltd., Krasnodar (2020), pp. 159–165.
K. A. Mullabaev and S. K. Churakova, “Development of methods for determining uniformity of phase distribution in packed extractors using CFD software,” Bashkir. Khim. Zhurn., 29, No. 2, 71–76 (2022).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 58, No. 10, pp. 10−14, October, 2022.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Mullabaev, K.A., Churakova, S.K. Optimization of Design of Liquid Redistributors in Packed Extractors by CFD-Analysis Methods Using Example of Liquefied Hydrocarbon Gas Demercaptanization Column. Chem Petrol Eng 58, 822–830 (2023). https://doi.org/10.1007/s10556-023-01168-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-023-01168-7