Skip to main content
SpringerLink
Log in

Systematic design and implementation of a high-robust adaptive calibration technique for ETI-induced analog front end circuits in EEG systems

  • Published:
Analog Integrated Circuits and Signal Processing Aims and scope Submit manuscript

Abstract

Robustness is a major concern of wearable electroencephalogram (EEG) acquisition systems. It is often closely tied with variations of electrode to tissue interface (ETI), resulting in significant difficulties for following analog front end (AFE) circuitry design and signal processing. To realize a high-robust EEG system and relax the AFE requirements, adaptive ETI characterization and signal calibration techniques are proposed. Instead of monitoring ETI impedance and/or employing an active electrode, this paper demonstrates an attempt to continuously detect dc offset and ac-coupled gain variations of an entire ETI-induced signal acquisition path (ETI-AP). Both additional and multiplicative factors of distorted signals are stabilized by an adaptive coefficient compensation algorithm, which modulates the non-stationary ETI-AP to a constant channel. During EEG measurement, a pseudo-random number sequence generated from a FPGA is driven to body as a test signal to estimate and compensate the ETI-AP characteristic. The proposed techniques were evaluated in lab environments where both spontaneous and evoked EEGs were recorded by using a bipolar montage on a long-haired, healthy adult. Furthermore, foam-covered and pin-based electrodes were placed on the participant’s scalp and skin surface in order to establish different ETI conditions. With this proposed technique, the empirical results shown the dynamic variation of non-stationary ETI was continuously characterized; calibrated EEGs achieved higher signal to noise ratio, which demonstrates the validity of the proposed method, as well as its compatibility with diverse sensors and bio-medical acquisition systems.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  1. Danielle E. (2014). The dream kickoff. Online article. Grantland. http://grantland.com/features/world-cup-2014-exoskeleton-miguel-nicolelis-brain-research-brazil/. Accessed 28 May 2014.

  2. Chi, Y. M., Jung, T. P., & Cauwenberghs, G. (2010). Dry-contact and noncontact biopotential electrodes: Methodological review. IEEE Reviews in Biomedical Engineering, 3, 106–119.

    Article  Google Scholar 

  3. Chi, Y. M., Wang, Y. J., Wang, Y. T., Jung, T. P., Kerth, T., & Cao, Y. (2013). A practical mobile dry EEG system for human computer interfaces. In D. D. Schmorrow & C. M. Fidopiastis (Eds.), Foundations of augmented cognition (pp. 649–655). Berlin: Springer.

    Chapter  Google Scholar 

  4. Chi, Y. M., Wang, Y. T., Wang, Y. J., Maier, C., Jung, T. P., & Cauwenberghs, G. (2012). Dry and noncontact EEG sensors for mobile brain-computer interfaces. IEEE Transaction on Neural System and Rehabilitation engineering, 20(2), 228–235.

    Article  Google Scholar 

  5. Gramatica F., Carabalona R., Casella M., Cepek C., Di Fabrizio E., Rienzo M. Di, Gavioli L., Matteucci M., Rizzo F. & Sancrotti M. (2006). Micropatterned non-invasive dry electrodes for brain-computer interface. In IEEE/EMBS 3rd international summer school on medical devices sensors (pp. 69–72).

  6. Liao, L., Wang, I., Chen, S., Chang, J., & Lin, C. (2011). Design, Fabrication and experimental validation of a novel dry-contact sensor for measuring electroencephalography signals without skin preparation. Sensors, 11, 5819–5834.

    Article  Google Scholar 

  7. Song J. Y., Shan T., Zhu S. & Chiu Y. (2014). A motion-artifact tracking and compensation technique for dry-contact EEG monitoring system. In IEEE Proceeding of Signal Processing and Biology Symposium (pp. 1-4).

  8. Song J. Y., Wei C. S., Jung T. P. & Wang Y. K. (2015). Monitoring and analysis of multiplicative characteristic variations for adhesive electrode by using self-electrocardiogram signals. In IEEE international conference on systems, man and cybernetics (pp. 761–764).

  9. Van, Alste J. A., & Schilder, T. S. (1985). Removal of base-line wander and power-line interference from the ECG by an efficient FIR filter with a reduced number of taps. IEEE Transactions on Biomedical Engineering, 12, 1052–1060.

    Google Scholar 

  10. Chowdhury, M. E. H., Mullinger, K. J., Glover, P., & Bowtell, R. (2014). Reference layer artifact substraction (RLAS): A novel method of minimizing EEG artifacts during simultaneous fMRI. NeuroImage, 84, 307–319.

    Article  Google Scholar 

  11. Mihajlovic V., Patki S. & Grundlehner B. (2014). The impact of head movements on EEG and contact impedance: an adaptive filtering solution for motion artifact reduction. In 36th annual international conference of the IEEE engineering in medicine and biology society (pp. 5064–5067).

  12. Guermandi, M., Cardu, R., Scarselli, E. F., & Guerrieri, R. (2015). Active electrode IC for EEG and electrical impedance tomography with continuous monitoring of contact impedance. IEEE Transactions on Biomedical Circuits and Systems, 9(1), 21–33.

    Article  Google Scholar 

  13. Helleputte, N. V., Konijnenburg, M., Petting, J., Jee, D. W., Kim, H., Morgado, A., et al. (2015). A 345 µW multi-sensor biomedical SoC with bio-impedance, 3-channel ECG, motion artifact reduction and integrated DSP. IEEE Journal of Solid-State Circuits, 50(1), 230–244.

    Article  Google Scholar 

  14. Hong S., Lee S., Roh T. & Yoo H. J. (2012). A 46 µW motion artifact reduction bio-signal sensor with ICA based adaptive dc level control for sleep monitoring system. In IEEE custom integrated circuits conference (pp. 1–4).

  15. Yazicioglu R. F., Kim S., Torfs T., Merken P. & Hoof C. V. (2010). A 30 µW analog signal processor ASIC for biomedical signal monitoring. In IEEE International Conference on Solid-State Circuits (pp. 124-126).

  16. Mitra S., Xu J., Matsumoto A., Makinwa K. A. A., Hoof C. V. & Yazicioglu R. F. (2012). A 700 µW 8-channel EEG/contact-impedance acquisition system for dry-electrodes. In IEEE symposium on VLSI circuits. (pp. 68–69).

  17. Nonclercq, A., & Mathys, P. (2010). Quantification of motion artifact rejection due to active electrodes and driven-right-leg circuit in spike detection algorithms. IEEE Transactions on Biomedical Engineering, 57(11), 2746–2752.

    Article  Google Scholar 

  18. Ottenbacher J. & Heuer S. (2009). Motion artifacts in capacitively coupled electrodes. In International federation for medical and biological engineering (pp. 1059–1062).

  19. Resource document. American National Standard. https://courses.engr.illinois.edu/ece445/documents/Safe_Current_Limits.pdf.

  20. Serteyn A., Vullings R., Meftah M. & Bergmans J. (2013). Using an injection signal to reduce motion artifacts in capacitive measurements. In IEEE engineering in medicine and biology society (pp. 4795–4798).

  21. Serteyn A., Vullings R., Meftah M. & Bergmans J. W. M. (2014). ECG reconstruction based on the injection of a multi-frequency signal in capacitive measurement systems. In IEEE engineering in medicine and biology society (pp. 1864–1867).

  22. Serteyn, A., Vullings, R., Meftah, M., & Bergmans, J. W. M. (2015). Motion artifacts in capacitive measurements: Reducing the combined effect of DC voltages and capacitance changes using an injection signal. IEEE Transactions on Biomedical Engineering, 62(1), 264–273.

    Article  Google Scholar 

  23. ANSI/AAMI. (1993). Safe current limits for electromedical apparatus. US. https://courses.engr.illinois.edu/ece445/documents/Safe_Current_Limits.pdf. Accessed 04 Apr 1993.

  24. ANSI/AAMI. (2001). American National Standard ANSI/AAMI EC11: 1991/(R) 2001/® 2007. http://www.ele.uri.edu/courses/bme484/AAMI_EC11_parts.pdf. Reaffirmed 04 May 2001.

  25. International Standard IEC 60601-2-17. https://webstore.iec.ch/p-preview/info_iec60601-2-17%7Bed2.0%7Den.pdf. Accessed Jan. 2004.

  26. Texas Instruments Incorporated. Online article. US. Low-noise, 8-channel, 24-bit analog front-end for biopotential measurements. Accessed July 2012.

  27. Connie Mack. (2000). The benefits of medical research and the role of the NIH. US joint economic committee (pp. 1–7).

  28. NIH-Protecting Human Research Participants. Online training. US. https://www.uab.edu/research/administration/offices/IRB/Training/Pages/NIH-Training.aspx.

  29. Chatrian, G. E., Lettich, E., & Nelson, P. L. (1985). Ten percent electrode system for topographic studies of spontaneous and evoked EEG activity. Am J EEG Technol, 25, 83–92.

    Google Scholar 

  30. Dabek, Juhani, Nikulin, Vadim V., & Ilmoniemi, Risto J. (2014). Detecting millisecond-range coupling delays between brainwaves in terms of power correlations by magneto encephalography. Journal of Neuroscience Methods, 235, 10–24.

    Article  Google Scholar 

  31. American electroencephalographic society. (1991). Guideline for standard electrode position nomenclature. Journal of Clinical Neurophysiology, 8, 200–202.

    Article  Google Scholar 

Download references

Acknowledgements

The authors wish to thank Dr. Yun Chiu from University of Texas at Dallas, Prof. Tzyy-ping Jung and Dr. Ying Wu from University of California at San Diego for valuable discussions. We gratefully acknowledge Swartz Center for Computational Neuroscience provided acquisition equipments in this work. Lastly, Chinese Scholarship Council financially supported Jingyi Song’s visiting program between Chinese and US universities.

Author information

Author notes

  1. Jingyi Song

    Present address: College of Electronic Science and Engineering, Jilin University, Changchun, 130012, China

Authors and Affiliations

  1. Swartz Center for Computational Neuroscience, University of California at San Diego, 10110 Hopkins Dr., La Jolla, CA, 92093, USA

    Jingyi Song

  2. Qualcomm Technology Inc., San Diego, CA, USA

    Yikai Wang

Authors
  1. Jingyi Song
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yikai Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Jingyi Song.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Jingyi Song joined a visiting program between Chinese and US universities since 2011.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Song, J., Wang, Y. Systematic design and implementation of a high-robust adaptive calibration technique for ETI-induced analog front end circuits in EEG systems. Analog Integr Circ Sig Process 91, 63–72 (2017). https://doi.org/10.1007/s10470-017-0925-3

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10470-017-0925-3

Keywords

Search

Navigation