Skip to main content
Log in

Determination of near real-time GNSS satellite clocks for the FORMOSAT-7/COSMIC-2 satellite mission

  • Original Article
  • Published:
GPS Solutions Aims and scope Submit manuscript

Abstract

In this study, we determine the near real-time (NRT) clocks of the Global Positioning System (GPS) and Globalnaya Navigatsionnaya Sputnikovaya Sistema (GLONASS) satellites in the Taiwan RO Process System (TROPS), which is mainly designed for the data processing in both the FORMOSAT-3/COSMIC (F3C) and FORMOSAT-7/COSMIC-2 (F7C2) satellite missions. The accuracy of GNSS clocks defines the quality of the atmospheric excess phase, which is used for the retrieval of bending angle profiles in GNSS radio occultation (RO) observations. The accuracy of the NRT GNSS clocks is assessed by comparing the clock rate, clock stability and clock-induced positioning error on receivers with the final solutions given by the European Space Agency (ESA). Overall, the standard deviations of the clock rates from TROPS agree with those from ESA within 0.05 mm/s over 2304 clock solutions. Additionally, we find that the clock stability of the GPS Block IIF type (3 × 10−13) is an order of magnitude better than that of IIR Block types (3 × 10−12) over a time interval of 30 s. In comparison, the stabilities of GLONASS clocks are approximately 3 × 10−12. We quantify the NRT clock error on the receiver positioning by using the precise point positioning technique obtained from the Bernese GNSS software. The 3-dimensional clock-induced positioning error is approximately 3.3, 3.2 and 0.9 cm for station AUCK and 6.9, 6.3 and 3.1 cm for station NRC1 for the GPS-only, GLONASS-only and GPS + GLONASS cases, respectively. For GNSS-RO applications, the bending angle profiles derived using TROPS GPS clocks agree with the COSMIC Data Analysis and Archive Center products to within 0.01–1.00 μrad. However, this is not the case for the GLONASS clock, because the GLONASS clock-induced errors on the RO profile are 10–100 times greater than those induced by the GPS clock. This suggests that different weightings should be used for RO applications, such as data assimilation, when different satellite clocks are involved in GNSS-RO retrievals. This study serves as a reference for assessing the impact of GNSS clocks on both GNSS-POD (precise orbit determination) and GNSS-RO in preparation for the F7C2 satellite mission.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

Download references

Acknowledgements

This study is funded by projects under grant numbers NSPO-S-102024, NSPO-S-103039, NSPO-S-105049 and NSPO-S-105058. We thank the TACC team in Taiwan CWB for their contributions to the F3C and F7C2 projects. We thank UCAR/COSMIC for providing the CDAAC software for the RO result comparisons. We are also grateful to IGS, CODE and ESA for providing the GNSS-related products. We thank anonymous reviewers for their helpful comments that improved the quality of the paper.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Tzu-Pang Tseng.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tseng, TP., Chen, SY., Chen, KL. et al. Determination of near real-time GNSS satellite clocks for the FORMOSAT-7/COSMIC-2 satellite mission. GPS Solut 22, 47 (2018). https://doi.org/10.1007/s10291-018-0714-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10291-018-0714-1

Keywords

Navigation