Skip to main content
Log in

Glycerol conversion over palladium- and alumina-impregnated KIT-6 for the production of gasoline range hydrocarbons

  • Original Paper
  • Published:
Clean Technologies and Environmental Policy Aims and scope Submit manuscript

Abstract

The use of large pore size catalyst with high surface area is explored in this work by using KIT-6 silica-based mesoporous material for the conversion of glycerol to higher hydrocarbons. Palladium and alumina were incorporated into the KIT-6 for providing Lewis acid sites and removal of oxygen. A decrease in surface area and pore diameter was observed with the incorporation of alumina and palladium on KIT-6. Ethanol was used as diluent as glycerol is viscous in nature and has issues related to flow in the preheater. An increase in the conversion was observed from 78 to 93.7% with the increase in temperature from 400 to 700 °C; however, the liquid yield was observed to decrease above 600 °C. GC (FID) analysis showed that the maximum values (38.9%) for gasoline range hydrocarbons fraction were obtained at 550 °C. No significant effect was observed on the liquid-phase yield with the addition of palladium; however, it was observed that the liquid product obtained in the presence of palladium has higher H/C ratio, indicating the formation of paraffinic compounds and removal of oxygen. GC/MS analysis showed the presence of mostly oxygenated long-chain hydrocarbons.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

Abbreviations

C:

Carbon

FID:

Flame ionization detector

GC/MS:

Gas chromatography–mass spectrophotometry

HC:

Hydrocarbon

H:

Hydrogen

KIT:

Korean Institute of Technology

O:

Oxygen

SAC:

Silica adsorption chromatography

SAR:

Silica-to-alumina ratio

SEM:

Scanning electron microscopy

TCD:

Thermal conductivity detector

XRD:

X-ray diffraction

References

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Dinesh Kumar.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kumar, D., Anand, N. & Pant, K.K. Glycerol conversion over palladium- and alumina-impregnated KIT-6 for the production of gasoline range hydrocarbons. Clean Techn Environ Policy 20, 751–757 (2018). https://doi.org/10.1007/s10098-017-1448-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10098-017-1448-4

Keywords

Navigation