Skip to main content
Log in

Xanthan gum biopolymer: an eco-friendly additive for stabilization of tropical organic peat

  • Original Article
  • Published:
Environmental Earth Sciences Aims and scope Submit manuscript

Abstract

Biogeotechnology is a recently established branch of geotechnical engineering, associated with the practical uses of microbiological techniques to improve the engineering properties of geomaterials. This study explores the utility of xanthan gum, an eco-friendly biopolymer obtained from microbial sources, for stabilization of tropical organic peat, using a series of macroscale and microscale test approaches. At the macroscale, the shear strength characteristics of both untreated and stabilized peat were evaluated using unconfined compression strength (UCS) and standard direct shear tests. Microscopic techniques, including field emission scanning electron microscopy (FESEM), Brunauer, Emmett, and Teller (N2-BET) surface area analysis, and particle size analysis, were also utilized to examine changes in the microstructural characteristics of stabilized peat that are caused by the chemical reaction that occurs between the xanthan gum and peat particles. UCS test results showed that the xanthan gum stabilization significantly improved the shear strength of the peat in its natural condition, with the 28-day strength of the stabilized peat being six times higher than the strength of the untreated peat. Microstructural analysis showed that the morphological characteristics of the peat are changed due to the chemical reaction that occurs during the curing process, as indicated by the FESEM results. Over time, formation of cementitious products was clearly observed, which welded peat particles and filled the pores in the soil structure, yielding a denser soil fabric with less pore volume and stronger attractive forces. From the testing that was performed, xanthan gum stabilization is recommended for peat as an eco-friendly and sustainable alternative to traditional soil stabilization additives such as cement or lime.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  • Ai-sharif MM, Attom MF (2014) A geoenvironmental application of burned wastewater sludge ash in soil stabilization. Environ Earth Sci 71(5):2453–2463

    Article  Google Scholar 

  • Bergmann D, Furth G, Mayer C (2008) Binding of bivalent cations by Xanthan in aqueous solution. Int J Biol Macromol 43(3):245–251

    Article  Google Scholar 

  • Bhattacharya SS, Shukla S, Banerjee S, Chowdhury P, Chakraborty P, Ghosh A (2013) Tailored IPN hydrogel bead of sodium carboxymethyl cellulose and sodium carboxymethyl xanthan gum for controlled delivery of diclofenac sodium. Polym Plast Technol Eng 52(8):795–805

    Article  Google Scholar 

  • Blanck G, Cuisinier O, Masrouri F (2014) Soil treatment with organic non-traditional additives for the improvement of earthworks. Acta Geotech 9(6):1111–1122

    Article  Google Scholar 

  • Bozbey I, Garaisayev S (2010) Effects of soil pulverization quality on lime stabilization of an expansive clay. Environ Earth Sci 60(6):1137–1151

    Article  Google Scholar 

  • British Standard Institution (1990) Methods of test for soils for civil engineering purposes. London, UK, BS 1377–1990: Part 2, 3, 6 and 7

  • BSI (1990b) Stabilized materials for civil engineering purposes: part 2, methods of test for cement-stabilized and lime-stabilized materials. BS 1924. British Standards Institution, London

  • Cadmus MC, Jackson LK, Burton KA, Plattner RD, Slodki ME (1982) Biodegradation of Xanthan gum by Bacillus Sp. Appl Environ Microbiol 44(1):5–11

    Google Scholar 

  • Casas JA, Santos VE, Garcıa-Ochoa F (2000) Xanthan gum production under several operational conditions: molecular structure and rheological properties. Enzyme Microb Technol 26(2–4):282–291

    Article  Google Scholar 

  • Chang I, Im J, Prasidhi AK, Cho GC (2015) Effects of Xanthan gum biopolymer on soil strengthening. Constr Build Mater 74:65–72

    Article  Google Scholar 

  • Comba S, Sethi R (2009) Stabilization of highly concentrated suspensions of iron nanoparticles using shear-thinning gels of Xanthan gum. Water Res 43(15):3717–3726

    Article  Google Scholar 

  • Davidson RL (1980) Handbook of water-soluble gums and resins. McGraw-Hill, New York; London

    Google Scholar 

  • Edil TB (2001) Site characterization in peat and organic soils. In Proceeding of the international conference on in situ measurement of soil properties and case histories, Bali, Indonesia, pp. 49–59

  • Eisazadeh A, Eisazadeh H (2015) N2-BET surface area and FESEM studies of lime-stabilized montmorillonitic and kaolinitic soils. Environ Earth Sci 74(1):377–384

    Article  Google Scholar 

  • EUROSOILSTAB (2002) Development of design and construction methods to stabilize soft organic soils: design guide soft soil stabilization. CT97-0351. Industrial and Materials Technologies Program (Brite-EuRam III), European Commission

  • Garcıa-Ochoa F, Santos VE, Casas JA, Gomez E (2000) Xanthan gum: production, recovery, and properties. Biotechnol Adv 18(7):549–579

    Article  Google Scholar 

  • Gratchev IB, Shokouhi A, Balasubramaniam A (2014) Feasibility of using fly ash, lime, and bentonite to neutralize acidity of pore fluids. Environ Earth Sci 71(8):3329–3337

    Article  Google Scholar 

  • Horpibulsuk S, Miura N, Nagaraj TS (2005) Clay-water/cement ratio identity of cement admixed soft clay. J Geotech Geoenviron Eng ASCE 131(2):187–192

    Article  Google Scholar 

  • Horpibulsuk S, Rachan R, Raksachon Y (2009) Role of fly ash on strength and microstructure development in blended cement stabilized silty clay. Soils Found 49(1):85–98

    Article  Google Scholar 

  • Horpibulsuk S, Rachan R, Chinkulkijniwat A, Raksachon Y, Suddeepong A (2010) Analysis of strength development in cement-stabilized silty clay based on microstructural considerations. Constr Build Mater 24(10):2011–2021

    Article  Google Scholar 

  • Horpibulsuk S, Chinkulkijniwat A, Cholphatsorn A, Suebsuk J, Liu MD (2012) Consolidation behavior of soil cement column improved ground. Comput Geotech 43:37–50

    Article  Google Scholar 

  • Horpibulsuk S, Suksiripattanapong C, Samingthong W, Rachan R, Arulrajah A (2015) Durability against wetting–drying cycles of water treatment sludge–fly ash geopolymer and water treatment sludge–cement and silty clay–cement systems. J Mater Civ Eng 28(1):04015078

    Article  Google Scholar 

  • Huat BBK (2004) Organic and peat soils engineering. Universiti Putra Malaysia Press, Serdang

    Google Scholar 

  • Ivanov V, Chu J (2008) Applications of microorganisms to geotechnical engineering for bioclogging and biocementation of soil in situ. Rev Environ Sci Bio Technol 7(2):139–153

    Article  Google Scholar 

  • JCPDS (1995) Index to the powder diffraction file. International Center for Diffraction Data, Swarthmore

    Google Scholar 

  • Kampala A, Horpibulsuk S, Chinkulkijniwat A, Shen SL (2013) Engineering properties of recycled calcium carbide residue stabilized clay as fill and pavement materials. Constr Build Mater 46:203–210

    Article  Google Scholar 

  • Kathirvel P, Saraswathy V, Karthik SP, Sekar ASS (2013) Strength and durability properties of quaternary cement concrete made with fly ash, rice husk ash and limestone powder. Arabian J Sci Eng 38(3):589–598

    Article  Google Scholar 

  • Kavak A, Baykal G (2012) Long-term behavior of lime-stabilized kaolinite clay. Environ Earth Sci 66(7):1943–1955

    Article  Google Scholar 

  • Laneuville SI, Turgeon SL, Sanchez C, Paquin P (2006) Gelation of native beta-lactoglobulin induced by electrostatic attractive interaction with Xanthan gum. Langmuir 22(17):7351–7357

    Article  Google Scholar 

  • Latifi N, Marto A, Eisazadeh A (2013) Structural characteristics of laterite soil treated by SH-85 and TX-85 (non-traditional) stabilizers. EJGE 18:1707–1718

    Google Scholar 

  • Latifi N, Eisazadeh A, Marto A (2014) Strength behavior and microstructural characteristics of tropical laterite soil treated with sodium silicate-based liquid stabilizer. Environ Earth Sci 72(1):91–98

    Article  Google Scholar 

  • Latifi N, Marto A, Eisazadeh A (2015a) Analysis of strength development in non-traditional liquid additive-stabilized laterite soil from macro-and micro-structural considerations. Environ Earth Sci 73(3):1133–1141

    Article  Google Scholar 

  • Latifi N, Marto A, Eisazadeh A (2015b) Physicochemical behavior of tropical laterite soil stabilized with non-traditional additive. Acta Geotech. doi:10.1007/s11440-015-0370-3

    Google Scholar 

  • Latifi N, Marto A, Rashid ASA, Yii JLJ (2015c) Strength and physico-chemical characteristics of fly ash-bottom ash mixture. Arabian J Sci Eng. doi:10.1007/s13369-015-1647-4

    Google Scholar 

  • Latifi N, Rashid ASA, Siddiqua S, Horpibulsuk S (2015d) Micro-structural analysis of strength development in low-and high swelling clays stabilized with magnesium chloride solution—A green soil stabilizer. Appl Clay Sci 118:195–206

    Article  Google Scholar 

  • Latifi N, Rashid ASA, Marto A, Tahir MM (2016a) Effect of magnesium chloride solution on the physico-chemical characteristics of tropical peat. Environ Earth Sci 75(3):1–9

    Article  Google Scholar 

  • Latifi N, Rashid ASA, Ecemis N, Tahir MM, Marto A (2016b) Time-dependent physicochemical characteristics of Malaysian residual soil stabilized with magnesium chloride solution. Arabian J Geosci 9(1):1–12

    Article  Google Scholar 

  • Marto A, Latifi N, Sohaei H (2013) Stabilization of laterite soil using GKS soil stabilizer. Electron J Geotech Eng EJGE 18:521–532

    Google Scholar 

  • Marto A, Latifi N, Eisazadeh A (2014) Effect of non-traditional additives on engineering and microstructural characteristics of laterite soil. Arabian J Sci Eng 39(10):6949–6958

    Article  Google Scholar 

  • Meo SA (2004) Health hazards of cement dust. Saudi Med J 25(9):1153–1159

    Google Scholar 

  • Met İ, Akgün H (2015) Geotechnical evaluation of Ankara clay as a compacted clay liner. Environ Earth Sci 74(4):2991–3006

    Article  Google Scholar 

  • Mitchell JK (1993) Fundamental soil behaviour. Willey, New York

    Google Scholar 

  • Miura N, Horpibulsuk S, Nagaraj TS (2001) Engineering behavior of cement stabilized clay at high water content. Soils Found 41(5):33–45

    Article  Google Scholar 

  • Moayedi H, Asadi A, Huat BBK, Moayedi F (2011) Optimizing stabilizers enhanced electrokinetic environment to improve physicochemical properties of highly organic soil. Int J Electrochem Sci 6(5):1277–1293

    Google Scholar 

  • Moayedi H, Kazemian S, Huat BB (2013) Shear strength parameters of improved peat by chemical stabilizer. Geotech Geol Eng 31(4):1089–1106

    Article  Google Scholar 

  • Pandey S, Mishra SB (2011) Graft copolymerization of ethylacrylate onto xanthan gum, using potassium peroxydisulfate as an initiator. Int J Biol Macromol 49(4):527–535

    Article  Google Scholar 

  • Phetchuay C, Horpibulsuk S, Suksiripattanpong C, Chinkulkijniwat A, Arulrajah A, Disfani MM (2014) Calcium carbide residue: alkaline activator for clay-fly ash geopolymer. Constr Build Mater 69:285–294

    Article  Google Scholar 

  • Plank J (2004) Applications of biopolymers and other biotechnological products in building materials. Appl Microbiol Biotechnol 66(1):1–9

    Article  Google Scholar 

  • Quantachrome Corporation (2007) Autosorb-1 series Manual. 1008 07101 REV. A

  • Rosalam S, England R (2006) Review of Xanthan gum production from unmodified starches by Xanthomonas comprestris sp. Enzyme Microb Technol 39(2):197–207

    Article  Google Scholar 

  • Saadeldin R, Siddiqua S (2013) Geotechnical characterization of a clay–cement mix. Bull Eng Geol Environ 72(3–4):601–608

    Article  Google Scholar 

  • Shen SL, Wang ZF, Horpibulsuk S, Kim YH (2013a) Jet grouting with a newly developed technology: the twin-jet method. Eng Geol 152(1):87–95

    Article  Google Scholar 

  • Shen SL, Wang ZF, Sun WJ, Wang LB, Horpibulsuk S (2013b) A field trial of horizontal jet grouting using the composite-pipe method in soft deposit of Shanghai. Tunn Undergr Space Technol 35:142–151

    Article  Google Scholar 

  • Sukmak P, Horpibulsuk S, Shen SL, Chindaprasirt P, Suksiripattanpong C (2013) Factors influencing strength development in clay-fly ash geopolymer. Constr Build Mater 47:1125–1136

    Article  Google Scholar 

  • Sukmak P, Silva PD, Horpibulsuk S, Chindaprasirt P (2015) Sulfate resistance of clay-Portland cement and clay-high calcium fly ash geopolymer. J Mater Civ Eng ASCE 27(5):04014158(1–11)

    Article  Google Scholar 

  • Suksiripattanapong C, Horpibulsuk S, Chanprasert P, Sukmak P, Arulrajah A (2015a) Compressive strength development in fly ash geopolymer masonry units manufactured from water treatment sludge. Constr Build Mater 82:20–30

    Article  Google Scholar 

  • Suksiripattanapong C, Horpibulsuk S, Boongrasan S, Udomchai A, Chinkulkijniwat A, Arulrajah A (2015b) Unit weight, strength and microstructure of water treatment sludge-fly ash geopolymer lightweight cellular geopolymer. Constr Build Mater 94:807–816

    Article  Google Scholar 

  • Wang M, Li J, Ge S, Qin S, Xu P (2014) An experimental study of vaporous water migration in unsaturated lime-treated expansive clay. Environ Earth Sci 73(4):1679–1686

    Article  Google Scholar 

  • Zohuriaan MJ, Shokrolahi F (2004) Thermal studies on natural and modified gums. Polym Test 23(5):575–579

    Article  Google Scholar 

Download references

Acknowledgments

The authors wished to acknowledge the financial supports given by the Ministry of Education Malaysia under the Fundamental Research Grants (FRGS).R.J130000.7822.4F658, and (PDRU).Q.J130000.21A2.02E82, and the supports from the Universiti Teknologi Malaysia (UTM). The second author is grateful for support provided by the Thailand Research Fund under the TRF Senior Research Scholar Program (Grant No. RTA5680002).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Nima Latifi.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Latifi, N., Horpibulsuk, S., Meehan, C.L. et al. Xanthan gum biopolymer: an eco-friendly additive for stabilization of tropical organic peat. Environ Earth Sci 75, 825 (2016). https://doi.org/10.1007/s12665-016-5643-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s12665-016-5643-0

Keywords

Navigation