The effect of the conditions of pulse laser deposition of MoSe x thin-film coatings on the structural and phase state of surface layer on an iron substrate and on the distribution of elements over the thickness of the coatingsubstrate interface is investigated. Model multilayer test pieces bearing a thin film of 57Fe are studied. The speed distributions of single- and double-charge ions due to pulse laser irradiation of a MoSe2 target are measured and used for mathematical modeling of the motion of laser plasma to the surface of the substrate in a pulse electric field. The energy distributions of the incident ions are computed as a function of the time of the action of the high-voltage pulse following the laser pulse and used to explain the experimentally determined effects.
Similar content being viewed by others
References
Yu. A. Bykovskii, V. N. Nevolin, and V. Yu. Fominskii, Ion and Laser Implantation of Metallic Materials [in Russian], Énergoatomizdat, Moscow (1991), 240 p.
P. V. Bykov, V. L. Vorob’ev, V. Ya. Bayankin, and S. N. Korshunov, “Effect of the rate of doing in irradiation with manganese ions on the composition of layers and mechanical properties of carbon steel,” Metalloved. Term. Obrab. Met., No. 6, 48–50 (2011).
S. N. Grigor’ev, A. S. Metel, and S. V. Fedorov, “Modification of structure and properties of high-speed steel by combined vacuum-plasma treatment,” Metalloved. Term. Obrab. Met., No. 1, 9–14 (2012).
S. N. Grigoriev, Yu. A. Melnik, and A. S. Metel, “Broad fast neutral molecule beam sources for industrial-scale beam-assisted deposition,” Surf. Coat. Technol., No. 1 – 2, 44–49 (2002).
V. N. Nevolin, V. Yu. Fominskii, R. I. Romanov, and G. A. Kiselev, “Tribological properties of diamond-like carbon coatings formed on steel by ion-assisted deposition from pulse laser plasma,” Uproch. Tekhnol. Pokryt., No. 6, 34–40 (2006).
S. N. Grigor’ev, “Recent vacuum-plasma facilities and technologies of combined hardening of tools and machine parts,” Tekhnol. Mashinostr., No. 3, 20–26 (2004).
A. Anders (ed.), Handbook of Plasma Immersion Ion Implantation and Deposition, New York (200), 282 p.
O. V. Sobol’, A. A. Andreev, S. N. Grigor’ev, et al., “Vacuumarc multilayer nanostructured TiN/Ti coatings: structure, stress state, properties,” Metalloved. Term. Obrab. Met., No. 1, 28–33 (2012).
E. V. Smolentsev and S. N. Grigor’ev, “Methodology of design of combined methods of treatment with application of electric field,” Fund. Prikl. Prob. Tekh. Tekhnol., No. 2, 93–100 (2011).
V. Yu. Fominski, A. M. Markeev, and V. N. Nevolin, “Pulsed ion beams for modification of metal surface properties,” Vacuum, 42(1/2), 73–74 (1991).
V. Yu. Fominski, V. N. Nevolin, R. I. Romanov, and I. Smurov, “Ion-assisted deposition of MoSe x films from laser-generated plume under pulsed electric field,” J. Appl. Phys., 89(2), 1449–1457 (2001).
J. S. Zabinski, J. J. Hu, J. E. Bultman, N. A. Pierce, and A. A. Voevodin, “Stoichiometry and characterization of aluminum oxynitride film grown by ion-beam-assisted pulsed laser deposition,” Thin Solid Films, 516, 6215–6219 (2008).
D. V. Shtansky, T. A. Lobova, V. Yu. Fominski, et al., “Structure and wear behavior of WSe x , WSe x /TiN, WSe x /TiCN and WSe x /TiSiN coatings,” Surf. Coat. Technol., 183(2–3), 328–336 (2004).
R. S. Bhattacharya, A. K. Rai, and A. Erdemir, “High-energy (MeV) ion beam modification of sputtered MoS2 coatings on sapphire,” Nucl. Instr. Meth. Phys. Res. B, 59/60, 788–792 (1991).
K. J. Wahl, D. N. Dunn, and I. L. Singer, “Effects of ion implantation on microstructure, endurance and wear behavior of IBAD MoS2,” Wear, 237, 1–11 (2000).
V. N. Nevolin, V. Yu. Fominskii, A. G. Gnedovets, and R. I. Romanov, “Study and simulation of growth of MoSe x solid lubricating coatings under pulsed laser deposition,” Zh. Teor. Fiz., 79(1), 118–124 (2009).
M. Mayer, SIMNRA User’s Guide, Rep. IPP 9/113, Max-Planck-Institut für Plasmaphysik, Garching, Germany (1997).
V. Yu. Fominski, R. I. Romanov, A. G. Gnedovets, and V. N. Nevolin, “About the mechanism of formation of chemical composition of thin-film layers from dichalcogenides of transition metals under pulsed laser deposition,” Zh. Teor. Fiz., 80(10), 120–128 (2010).
C. K. Birdsall and A. B. Langdon, Plasma via Computer Simulation, IOP Publ., Bristol (1991), 400 p.
V. N. Nevolin, V. Yu. Fominskii, A. G. Gnedovets, and V. E. Koshmanov, “Experimental studies and simulation of ion implantation from pulse laser plasma in pulse electric fields,” Zh. Teor. Fiz., 75(6), 32–37 (2005).
V. N. Nevolin, V. Yu. Fominskii, A. G. Gnedovets, and R. I. Romanov, “Special features of pulsed laser deposition of thin-film coatings with the use of anti-drip screen,” Zh. Teor. Fiz., 79(11), 120–127 (2009).
C. E. M. Campos, V. Drago, J. C. Lima, et al., “Mössbauer and magnetization studies of Fe25Se75 iron selenides produced by mechanical alloying,” J. Magn. Magn. Mater., 269, 6–14 (2004).
R. Joshee, D. M. Phase, S. V. Ghaisas, et al., “Conversion electron Mössbauer spectroscopy study of ion-beam mixing at Fe – Mo interface,” J. Appl. Phys., 59(2), 388–394 (1986).
E. Ibe, “Picosecond diffusion in a thermal spike during ion mixing,” Nucl. Instr. Meth. Phys. Res. B, 39, 148–152 (1989).
V. Yu. Fominski, S. N. Grigor’ev, R. I. Romanov, and V. N. Nevolin, “Effect of conditions of pulsed laser deposition on tribological properties of thin-film nanostructured coatings based on molybdenum diselenide and carbon,” Zh. Teor. Fiz., 82(4), 96–104 (2012).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 3, pp. 34 – 41, March, 2013.
Rights and permissions
About this article
Cite this article
Grigor’ev, S.N., Fominskii, V.Y., Gnedovets, A.G. et al. Structural and phase changes of iron substrate upon pulse laser deposition of MoSe x solid lubricating coatings. Met Sci Heat Treat 55, 150–156 (2013). https://doi.org/10.1007/s11041-013-9597-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-013-9597-5